Company News

Bridgeport Fittings, Inc.

705 Lordship Blvd., Stratford, CT, 06615, USA

  • 203-377-5944

Latest New Product News from
Bridgeport Fittings, Inc.

Electrical Equipment & Systems

AMC52-QI Duplex Cable Connector features quick-installation and quick-removal capabilities.

Aug 15, 2017

Bridgeport Fitting’s AMC52-QI duplex cable connector can connect a box or enclosure to two AC/MC/MCI-A/HCF/HCFMCI-A/MC-PCS cables (with diameters between .43” and .59”) or two .375” FMC cables. The zinc-plated steel connector is built for simple installation and requires no tools to attach. Contractors need only squeeze and set the connector, allowing cable installations far faster... Read More

Mechanical Power Transmission

281-DCG Couplings meet cULus standards.

Jun 28, 2017

Used to transition and bond ½ in. flexible metal conduit to ½ in. EMT, 281-DCG Couplings are suitable for prefabricated motor applications. Paired with Bridgeport’s 407-DC2G fittings, units feature external mechanical copper lug.

Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

4357-NM Multi-Port Transition Fittings are CETLus listed.

Jun 14, 2017

Consisting of one cable per port: 14/2 to 10/3 or two cables per port: 14/2, 12/2, 10/2 cable port capacities, Mighty-Merge® 4357-NM Multi-Port Transition Fittings transition cables into 3/4 in. EMT. Providing mechanical protection for NM cable conductors, unit is suitable for prefabrication of bundles of nonmetallic cable.

Read More

Mounting & Attaching Products

Mighty-Merge® Multi-Port Connectors are cETLus Listed.

May 27, 2017

Used for connecting connect multiple cables through a single ¾ in. KO, Mighty-Merge® 630-NM2 Multi-Port Connectors allow contractors for quick installation and removal by squeezing fittings tabs.

Read More

Portable Tools

MC-EZ-PAK Productivity Kit is cULus and cETLus listed.

Apr 13, 2017

Consisting of (25) E-Z Lock™ AMC-50QI Cable Connectors, (25) US-4461 Universal Straps and (30) ¾ in. Wafer Head Screws, MC-EZ-PAK Armored Cable Productivity Kit is used to connect and support AC/MC cables. AMC-50QI double-snap Cable Connectors provide fast and secure connections. Suitable for dry and wet locations, US-4461 Universal Strap helps in strapping 14/2 to 10/3 AC and MC cables.

Read More

Fluid & Gas Flow Equipment

ICE Series Inside Corner Elbow enables installations in inaccessible locations.

Feb 01, 2017

Used in ceiling installation for communications and power, hard-to-reach 90-degree bends under decks and below floors, ICE Inside Corner Elbow allows for multiple conduit runs which are to be installed in parallel without interference while accessing elbow’s cover. Providing smooth pulling surface for conductors to glide against, product enables for easy access when adding or removing cables... Read More

Mighty Merge Couplings integrate multiple cables into one EMT conduit.

Oct 31, 2016

Presenting contractors with various options when transitioning to EMT, Mighty-Merge multi-port, cable-to-MC transition couplings integrate multiple AC/MC/MCI-A/HCF/MC-PCS cables into one EMT conduit. Part of cETLus-Listed family of fittings, couplings can be installed in enclosure with limited number of knockouts as they come with two, three or four ports (4156-DC, 4357-DC, 4457-DC), thus... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Extra-Long Raintight Connectors solves solar installation issue.

Aug 29, 2016

Available in ½, ¾, and 1 in. trade sizes, Mighty-Seal® 250-RT2XL fittings provide contractors with enough threads to attach to thick-wall (3/8+ in.), non-metallic combiner boxes while sill leaving enough threads afterwards for optional grounding bushing. Compression style connector is designed with internal sealing ring and knockout gasket that create raintight seal when... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Quick-Install Connector offers snap-in, tool-free installation.

Apr 12, 2016

Offering alternative for prefab and lighting whips, AMC50-QI EZ-Lock™ offers double-snap AMC style mechanism for making secure connections without requiring any tools. Installation requires handler to snap connector onto cable, squeeze lever, and set into knockout. Lever action likewise facilitates and accelerates removal. Made of zinc-plated steel, product is used to connect .40–.61 in.... Read More

Fasteners & Hardware, Safety & Security Equipment

Split Grounding Bushings come in large sizes.

Feb 26, 2016

Available in 4, 5, and 6 in. models, Mighty-Rite® Steel Split Grounding Bushings are suited for large industrial, commercial, and municipal projects. Units are designed for primary (high voltage) installations and applications where full-sized grounding conductor is required. Used with Rigid/IMC conduits, hubs, and connectors, cULus listed bushings come with tin-plated, aluminum 350–500 MCM... Read More

Green & Clean, HVAC

Thermal Dampers feature Class 1 and 1A leakage rates.

Jul 01, 2015

Employing thermally insulated and broken aluminum airfoil blades and thermally broken aluminum channel frame, TICD Series eliminate transfer of cold or heat and reduce condensation while providing air control in medium- to high-pressure and -velocity applications. Products feature AMCA Certified Leakage of Class 1 (12.6 cfm/ft² @ 10 in. wg at 60 in. wide) and Class 1A (3 cfm/ft²... Read More

Fasteners & Hardware

Single-Hole Strap supports parallel runs of multiple cables.

Jul 01, 2015

Allowing multiple runs of cable to be strapped parallel to each other using one fastener, Mighty-Hold® Duplex Universal Steel One Hole Strap ensures contractors always have proper strap for application at hand. Spring-loaded finger enables zinc-plated, steel strap to securely fasten range of AC/MC/MCIA cables. Supporting two runs of AC/MC/FMC, cULus-Listed product accommodates 14/2 to... Read More

Electrical Equipment & Systems

Grounding Lug provides continuity for cable tray system.

Jun 09, 2015

To provide grounding continuity and meet NEC Code requirements under Article 250-96(A), ALI-WMCT securely attaches No. 4 to No. 14 copper and aluminum solid and stranded grounding conductors to cable tray. This grounding lug for wire mesh cable trays helps improve equipment and personnel safety while also reducing system noise and removing transient and fault current. Construction features... Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission

EMT to FMC Transition Couplings help contractors conserve time.

May 26, 2015

Available in ½–2 in. in die cast zinc and 2 ½–4 in. in zinc plated steel, Mighty-Merge® EMT to FMC/Greenfield transition couplings provide dimensional flexibility when transitioning between raceways. Design negates need for contractors to assemble multiple fittings or mount box to transition between raceways. While EMT to FMC fittings (½–2 in.) are cULus Listed, EMT/Rigid to... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Transition Couplings range from 1/2 to 2 in.

Dec 16, 2014

Made of die cast zinc, 4360-DC Raintight EMT to Liquid Tight Transition Couplings eliminate need for contractors to assemble multiple fittings, or mount box, to transition between raceways. Couplings are suited for connecting to HVAC systems, generators, transformers, and other rooftop equipment. In addition, fittings can be used when transitioning between solar arrays and inverters. Read More

Electrical Equipment & Systems

Snap-in/Set Screw Transition Coupling does work of 3 fittings.

Oct 27, 2014

Helping contractors accelerate job completion, Mighty-Merge® Snap-in/Set Screw Transition Coupling features set screw end for EMT and quick install snap-in end for AC/MC cables and flexible metal conduit. This cETLus-Listed, zinc die cast coupling is suited for transitioning fixture whips above drop ceiling as well as continuing speed of MC down wall to emergency lights. Read More

Fasteners & Hardware

Steel Split Bushings help minimize facility downtime.

Aug 04, 2014

Installed before or after pulling wire and making connections, Mighty-Rite Steel Split Grounding Bushings protect conductors. Split design and usability also help minimize facility downtime when upgrading power and data systems. Hinged design facilitates adjustments and alignments, even in tight spots; adjustable lay-in lugs position conductors for facilitated alignment and access; and... Read More

Fasteners & Hardware, Mounting & Attaching Products

Threadless Bushings ground and bond unthreaded conduit.

Mar 20, 2014

Designed for grounding and bonding unthreaded Rigid/IMC conduit to enclosures or equipment, TL Series features plastic liner that protects insulated conductors from abrasion during pulling or due to mechanical vibration. Bushings have malleable iron, zinc-plated body and tin-plated lay-in lug that facilitates installation and alignment of AL/CU conductors where raceway is required to be grounded.... Read More

Fasteners & Hardware, Mounting & Attaching Products

Nonmetallic Split Bushings eliminating need for rework.

Feb 19, 2014

Available in 2–4 in. trade sizes and made of PA 66 synthetic polyamide (105°C rated), Mighty-Rite® Nonmetallic Split Bushings can be installed before or after pulling wire. Snap-on, hinged design adjusts and aligns without requiring any installation tools, while self-aligning latching mechanism also permits one-hand installation. Internally threaded for use with threaded conduit or... Read More

Mechanical Power Transmission

Transition Couplings provide raintight/wet location seal.

Nov 05, 2013

Made of zinc die cast material, Mighty-Merge Raintight EMT to Rigid Transition Couplings come in ½ in. (290-RT), ¾ in. (291-RT), and 1 in. (292-RT) trade sizes for both EMT and Rigid. cETLus Listed units simplify stub-ups in wet locations and offer contractors easy rooftop transition solutions. Read More

Other Company News from
Bridgeport Fittings, Inc.