Company News

Murata Power Solutions

11 Cabot Blvd., Mansfield, MA, 02048, US

  • 508-339-3000
  • 800-233-2765

Public Relations:
Robert Huntley
Publitek Limited
18 Brock Street
Bath BA1 2LW United Kingdom
Phone: 44-0-1225-470000
Fax: 44-0-1225-470047
E-mail this person

General Information:
Aya Tonooka
United Kingdom
Phone: 44-0-1252-811666
Fax: 44-0-1252-811777
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Murata Power Solutions

Sensors, Monitors & Transducers

MEMS Accelerometer/Gyroscope withstands harsh environments.

November 20, 2014

Able to withstand use in automotive and industrial application environments, SCC2000 series consists of low-g, 3-axis accelerometer with 2 angular rate sensor options of X- or Z-axis detection and 32-bit digital SPI interface. Sensor has configurable, software-selectable, 10–60 Hz low pass filter, and 24-pin premolded plastic RoHS-compliant SOIC housing, suitable for SMD mounting, measures 15.00 x 12.10 x 4.35 mm. Combined sensor with gyro featuring up to 300°/sec range is also available. Read More

Electrical Equipment & Systems

Front-End AC/DC Power Supplies include 1,300 W model.

October 21, 2014

Able to deliver 1,300 W from 108–264 Vac universal input, hot pluggable D1U3CS 1300 series has no minimum load requirement and incorporates low-loss integral O-Ring FETs on main 12 V output for fault-tolerant and N+1 redundant applications. Power density is 23 W/in.³, and conversion efficiency at half full load is 92% typ. With power factor of 0.99 typ, D1U3CS-W-1300F features primary 12 Vdc output, optional 3.3 or 5.0 V auxiliary output, and active PFC. Read More

Electrical Equipment & Systems

Digital 40 A, 132 W PoL DC/DC Converter offers 97.2% typ efficacy.

September 26, 2014

Comprising non-isolated point-of-load (PoL) DC/DC converters, fully regulated OKD series measures 30.85 x 20.0 x 8.2 mm and includes through-hole, single-in-line, and SMT package options. PMBus™ interface facilitates power management, and interfacing converter to system's I²C bus allows monitoring of system-level performance requirements. Other features include digital current sharing, non-linear transient response, optimized dead time control, synchronization, and phase spreading. Read More

Electrical Equipment & Systems

DC/DC Converter suits high/low side IGBT drive applications.

May 5, 2014

Comprising 12 dual-output models, MGJ2 series can power high/low side gate drives in bridge circuits using IGBTs and MOSFETs. Encapsulated products feature basic and supplementary insulation, with isolation test voltage of 5.2 kVdc, and come in SIP format. Nominal input voltages are 5, 12, 15, and 24 Vdc, and there are 3 output voltage combinations: +15/-5 Vdc, +15/-8.7 Vdc, and +20/-5 Vdc, for each input voltage. Occupying 1.96 cm² footprint, converters have power density of 0.81 W/cm³. Read More

Electrical Equipment & Systems

DC-DC Converters meet third edition medical safety standard.

April 29, 2014

Accommodating 4:1 input, NCM6 Series comes in 3 nominal input voltage ranges of 5 Vdc (4.5–9 Vdc), 12 Vdc (9–36 Vdc), and 48 Vdc (18–75 Vdc). Each variant offers 7 output voltage models. Four single output versions deliver +3.3, +5, +12, or +15 Vdc, while 3 dual output models provide ±5, ±12, or ±15 Vdc. Housed in 20.0 x 32.0 x 10.75 mm package, 6 W encapsulated converters operate from -40 to +85°C with input undervoltage lockout feature and input to output isolation of 5,200 Vdc. Read More

Electrical Equipment & Systems

Encapsulated 6 W DC/DC Converter features 4:1 input range.

April 18, 2014

Meeting 3rd edition medical safety standard, NCM6 series offers 3 nominal input voltage ranges of 5 Vdc (4.5–9 Vdc), 12 Vdc (9–36 Vdc) or 48 Vdc (18–75 Vdc). Each offers 7 output voltage models: 4 single-output versions (+3.3, +5, +12, and +15 Vdc) and 3 dual output models (+5, +12, and +15 Vdc). Along with 5,200 Vdc input to output isolation, these 20.0 x 32.0 x 10.75 mm, 6 W converters feature -40 to +85°C operating range and input undervoltage lockout.
Read More

Electrical Equipment & Systems

DC/DC Converter suits wireless backhaul, smart grid applications.

March 17, 2014

Featuring single fixed 12 Vdc/20 A output, UWQ-12/20-T48 comes in DOSA-compatible, open-frame, quarter brick, 58.4 x 36.8 x 11.7 mm package and accepts 3:1 input range of 18–60 Vdc around nominal 48 Vdc. Remote sense automatically adjusts Vout to make up for line and load losses, while trim allows ±10% of Vout. With 92% typ efficiency, converter features 2,250 Vdc input to output isolation and offers regulation that ensures output voltage does not vary beyond ±1.25% when load changes. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers

DC-DC Converters suit distributed power applications.

March 7, 2014

Packaged in eighth brick format measuring 58.4 x 22.9 x 10.7 mm, DOSA-compliant UEE Series is available with mounting pins or as surface mount devices. Series comprises 3 models with 2:1 input voltage range of 36–75 Vdc and output voltages of 3.3, 5, or 12 Vdc. Providing typical efficiency of 92%, 150 W units have tight line regulation of ±0.1% and load regulation up to ±0.25%. Basic input/output isolation is 2,250 Vdc and complies with safety standard EN/UL/EC 60950. Read More

Other Company News from
Murata Power Solutions