Murata Power Solutions
Mansfield, MA 02048
Digital Panel Voltmeters feature red, blue, or green LEDs.
Housed in epoxy-encapsulated, 12-pin DIP package with built-in color filter and bezel, DMS-20PC Digital Panel Voltmeters are powered by single +5 V supply and have 4 differential input voltage ranges of Ã-
Read More »
Inductors feature operating temperature range of -40 to 85-
Suited for low and medium current applications and high density circuits, RoHS compliant, low DC resistance 1100R and 1300R series are fully backward compatible with Sn/Pb soldering systems. Measuring 4.0 mm dia x 5.5 mm, 1100R series offers inductance values ranging from 1.0-470 Ã-µH and has maximum current ratings of 0.14-3.0A. Series 1300R measures 8.0 mm dia x 10 mm, has inductance values...
Read More »
Quarter Brick DC/DC Converters offer output of up to 165 W.
Providing 3.3 Vdc fixed output and output current of up to 50 A, HPQ series isolated DC/DC converters offer input range of 36-75 Vdc and utilize synchronous rectifier topology for efficiency up to 90%. Advanced planar magnetics design provides full magnetic and optical isolation, with insulation to 2,250 V. Measuring 58.4 x 36.8 x 10.2 mm, RoHS compliant units have open frame design and operate...
Read More »
PFC AC/DC Front-End Power Supply delivers 2,800 W output.
Supplied in 11.5 x 5.5 x 1.6 in. enclosure with internal cooling fans, RoHS-compliant D1U-H-2800-52-Hx has -52 V main output and +12 V standby output. N+1 redundancy-capable unit, suitable for hot-docking, has 27.7 W/in.Ã-³ power density and 91.6% (full load) or 92.0% (2 kW load) efficiency. Used for mission-critical 48 V distributed power architecture systems in data communications...
Read More »DC/DC Converter offers isolated 2 W single output.
Available in pin compatible, industry-standard SIP package, NMK Series isolated single output dc/dc converters feature 89% efficiency at 15 V output, 7% output voltage set point accuracy, maximum load regulation 2.5% at 15 V output, 3 kVdc isolation, and power density to 1.33 W/cmÃ-³. They offer full 2 W of power across industrial temperature range of -40 to 85Ã-
Read More »
Current Sense Transformers suit high-frequency applications.
Surface-mount 5300/5400/5500 series operate over 50-500 kHz range and are built with UL94 V-0 package materials. Comprised of 10 devices with primary current rating to 10 A and 20-200 turns, 5300 series can measure/monitor ac currents up to 10 A and features primary to secondary isolation of 500 Vrms. Series 5400 and 5500 measure/monitor ac currents to 15 A and are available with 50, 100, or 200...
Read More »
DC/DC Converters power DDR1, DDR2, and DDR3 memory.
Model VCN60BADJTU-1C 60 A-rated converter has overall dimensions of 61 x 9.5 x 31.8 mm while VCN70BADJTU-1C 70 A unit measures 61 x 16.8 x 31.8 mm. Both point-of-load converters have current density of approximately 50 A/in3 and efficiency of 88% at full load as well as programmable output voltage range of 0.6-3.5 Vdc. They include soft start circuit, differential remote sense, power good signal,...
Read More »POL DC/DC Converters power DDR memory applications.
Featuring small form factor with 1U height, 60 A Model VCN60BADJTU-1C and 70 A Model VCN70BADJTU-1C offer current density of 50 A/inÃ-³ and 88% efficiency at full load. With input voltage of 12 Vdc, units deliver programmable output from 0.6-3.5 Vdc with setpoint accuracy of 0.5%. Both include soft start circuit, differential remote sense, power good signal, pre-bias turn on, and output...
Read More »
Quarter Brick DC/DC Converters feature 4:1 input range.
Suiting industrial, medical, and telecom applications, UQQ family of converters supply 100 W of power. Offered in pin-compatible package measuring 2.22 x 1.46 x 0.43 in., converters install on PC boards with Ã-½ in. card spacing. Input ranges are 9-36 Vdc, 12 V and/or 24 VIN nominal, and 18-75 Vdc, 24 V and/or 48 VIN nominal. Available models include 3.3 V/25 A, 5 V/20 A, 12 V/8 A, 15 V/7 A,...
Read More »AC/DC Power Supplies target distributed power applications.
Available in 1,200, 1,600, and 2,000 W models, D1U-W Series front-end power supplies are 1U high, RoHS-compliant, hot-pluggable, and support redundant applications. Units feature 12 or 48 V main output with 3.3, 5, or 12 V standby voltage options. They provide active current sharing on main output, I2C bus with status indicators, plus over-voltage and over-temperature protection. Measuring 304.8...
Read More »