Company News

Celera Motion

125 Middlesex Turnpike, Bedford, MA, 01730, USA

  • 781-266-5200

Latest New Product News from
Celera Motion

Sensors Monitors & Transducers, Test & Measuring Instruments

MicroE Veratus™ Series Encoders come with plug-and-go setup.

Jul 25, 2017

MicroE Veratus™ Series Encoders utilize VeraPath™ technology and feature mounting configurations, index selection, analog and digital incremental encoder outputs. Units come with A-quad-B or 1Vpp sin/cos interface options. Product is compatible with MicroE’s linear glass scales, linear metal tape and rotary scales. Encoder’s sensor head comes in 35 x 13.5 x 10 mm dimensions and... Read More

Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

MicroE Optira™ Series Encoders provide resolution up to 5nm.

Jul 25, 2017

Compatible with MicroE’s linear glass scales, linear metal tape and rotary scales, MicroE Optira™ Series Encoders are embedded with A-quad-B or 1Vpp sin/cos interface options. Unit’s sensor head measures 11.4 x 13 x 3.7 mm and is available in 3.3 VDC version. Products use PurePrecision™ optical technology. Encoder’s sensor head comes with two mounting options and a FFC connector.

Read More

Mechanical Power Transmission

Precision Hollow Shaft Stage comes in NEMA 23-compatible package.

Feb 13, 2015

Customizable, precision, hollow bore, direct drive servo motor system has NEMA 23 footprint and scalable encoder paired with precision bearings. This rotary stage enables automation and OEM engineers to add hollow shaft precision stage and realize precise positioning and smooth motion. Suited for fine positioning applications, product supports multiple options for encoder resolutions as well... Read More

Mechanical Power Transmission

Frameless Brushless Motor Kits deliver smooth motion.

May 05, 2014

Covering diverse direct drive motion control applications, ULT/UTH/UTS cover sizes from 8 mm to 1 m dia and torque outputs that exceed 1,000 NM. Kits operate from 3-phase amplifiers and provide maximum torque and smoothness from sinusoidal commutation. Designed with minimum torque harmonic distortion for smooth operation at all speeds, kits offer center through-holes, radial cross-sections,... Read More

Mechanical Power Transmission

High-Torque Gearmotors are built to custom requirements.

Nov 16, 2012

Intended for high-torque, low-speed, and low-profile applications, custom gearmotor assemblies consist of ULT, UTH, or UTS direct drive, frameless motors with appropriate gearing for project at hand. Precision bearings and high-resolution encoders are also included, and assemblies range in size from 25–800 mm dia; 150 mm dia, 150 mm unit can produce 50 nm continuous torque (150 nm peak).... Read More

Mechanical Power Transmission

Frameless Direct Drive Motor Kits suit EV applications.

Feb 08, 2012

With resistances down in milliohm range, ULT, UTH, UTS, and UTO Frameless Motor Kits are suitable for battery-operated systems ranging from propulsion to accessories in light EV systems. Frameless kits cover sizes from 7.5-533 mm diameter and torque outputs that exceed 1,000 nm. By modifying wire gage, motors can be optimized for 12-600 V applications. Read More

Mechanical Power Transmission

Direct Drive Motor Engineering Service builds custom systems.

May 27, 2011

Custom design engineering service, used for incorporating ULT, UTH, UTS, and UTO frameless motor kits into application-specific, direct drive motors, delivers precision encoders and bearings in unique packages. Application-specific design elements can take mechanical, accuracy, and harsh environment requirements into account. After appropriate motor kit is selected, engineers guide end-users... Read More

Mechanical Power Transmission

Linear Motor Kits are suited for low profile applications.

Feb 08, 2011

To accommodate needs of scanning and imaging systems, custom micro-linear motor kits feature air-core linear motors that function with servo drives and offer true sinusoidal torque curves. In single- or multi-phase configurations, units can function as limited travel actuators or linear motors and integrate with sinusoidal motor controller electronics. Initial models have profiles below 0.5 in.,... Read More

Mechanical Power Transmission

UTS Slotless Frameless Motors have low magnetic core losses.

Nov 09, 2009

Covering 29-240 mm dia with thin radial length, UTS Series direct drive slotless motors suit direct drive positioning or high speed spindle applications. Frameless feature allows integration of unit into high speed spindles, operate with very low heating. Motors operate from industry standard brushless DC or brushless AC drivers from 12-300 V and can be wound for low speed or high speed... Read More

Mechanical Power Transmission

Direct Drive Frameless Motors have outside rotating design.

Feb 10, 2009

Outside rotating frameless motor kits of ULT-O series feature rotor external to stator, allowing for integration of rotor ring into outside rotating hub. Optimized for smooth, low-speed motion or high-precision applications, motors operate from 3-phase brushless DC/AC sinusoidal servo drives. Through hole and profile sizes promote application flexibility, and windings are available for operation... Read More

Mechanical Power Transmission

Direct Drive Frameless Motors come in sizes to 500 mm dia.

Aug 14, 2007

Helping reduce system height, low-profile T Series come in axial lengths as low as 25 mm with through holes up to 450 mm. Products operate from 3-phase trapezoidal or sinusoidal motor controllers, rated 12-700 Vdc, and larger diameter motors achieve speeds up to 1,000 rpm. Hall Devices and various cable/connector options are available. Among other applications, areas of use include turrets and... Read More

Mechanical Power Transmission

Direct Drive Motors deliver up to 10,000 rpm speed.

Jun 18, 2007

Suited for optics applications and direct drive rotary table systems, ULT Series direct drive frameless motors are available in sizes down to 27 mm dia with axial length as low as 8 mm and up to 20 mm through hole. They operate from traditional 3-phase trapezoidal or sinusoidal motor controllers ranging from 12-320 Vdc. Units can be utilized for precision positioning with use of high resolution... Read More

Mechanical Power Transmission

Direct Drive Frameless Motors have low-profile design.

May 24, 2007

Able to achieve speeds to 10,000 rpm, ULT Series is available in sizes down to 27 mm dia with axial length as low as 8 mm and through hole up to 20 mm. Motors operate from choice of controllers, including 3-phase trapezoidal or sinusoidal motor controllers from 12-320 Vdc and sensorless motor controllers. Hall Devices and special cable/connector options are available, and areas of use include... Read More

Mechanical Power Transmission

Brushless Motors achieve zero cogging.

Aug 02, 2005

Frameless, Axial Airgap Series AAG offers smooth sinusoidal torque output versus angle and applies to almost any speed range. Motors can be optimized for 3-phase brushless motor controllers from 5-48 V with speeds from 0.1-20,000 rpm. Axial thickness of 5 mm can be achieved at up to 300 mm diameter. Applications include scanning equipment, inspection machines, and small integrated pumps. Read More

Mechanical Power Transmission

Brushless Servo Motor has 16 mm through bore in shaft.

Nov 05, 2004

HO Series combines NEMA 23 mounting with through hole, encoder, and slotless motor construction, eliminating unwanted magnetic disturbances. Motors come with internally mounted glass encoder grating and encoder read head. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability at 0.3 microradians, and torque curves have less than 1% harmonic distortion. Wires,... Read More

Sensors Monitors & Transducers

Pancake Resolver suits sensitive area applications.

May 07, 2004

Frameless Series ULT ranges from 3-15 in. diameter with through holes from 2.5-14 in. High-resolution angular error map allows users to compensate for mechanical error electronically. Resolver is suited for systems requiring large through holes with low-profile mechanics and limited angle of rotation. It is insensitive to temperature variations and meet shock, drop, and vibration requirements of... Read More

Mechanical Power Transmission

Direct Drive Motor operates from 1-9,000 rpm.

Jun 26, 2003

Model ULT-63 has 44 mm through-hole and axial heights as low as 2.5 mm. Expanded windings are provided for applications requiring up to 600 Vdc. Torque curves with less than 1% harmonic distortion result in smooth operation using sinusoidal current control amplifiers. Frameless motor is suitable for positioning optical components in inspection machinery, and can be integrated into direct drive... Read More

Mechanical Power Transmission

Motors suit light assembly and inspection applications.

Nov 13, 2002

HO Series brushless servo motors combine NEMA 23 mounting with through hole and encoder. Combining accuracy, resolution, and repeatability of rotary stage, motors come with internally mounted glass encoder grating aligned to better than 24 microradians of absolute accuracy. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability of 0.3 microradians. Torque curves... Read More

Mechanical Power Transmission

Direct Drive Motors allows large through holes.

May 08, 2002

ULT Direct Drive motors are available in 64, 127, 165, and 190 mm O.D. with through holes up to 75% of OD. Peak torque is 1800 oz-in. Machine-wound stator coils optimize motor constant and keep axial length to minimum. Single-piece, multi-pole magnets are available with custom hubs, allowing simple integration into rotary stage design. Standard windings are available for 12, 24, and 48 V, and... Read More

Mechanical Power Transmission

Direct Drive Motor comes in two parts.

Nov 26, 2001

Brushless ULT frameless motor has separate rotor and stator that can be integrated into precision mechanical assemblies. Low profile motor has axial lengths as small as 10 mm, diameters up to 165 mm, and through holes up to 120 mm, making it suitable for direct drive rotary applications. Models are available with 30 to 600 oz-in of torque output. Its three phase motor will run on any sinusoidal... Read More

Other Company News from
Celera Motion