Company News

Nippon Pulse America, Inc.

4 Corporate Dr., Radford, VA, 24141, USA

  • 540-633-1677

Latest New Product News from
Nippon Pulse America, Inc.

Mechanical Power Transmission

L250SSS Linear Shaft Motor comes with 30 mm length forcer.

March 20, 2017

Featuring small forcers and stack lengths for high density applications, L250SSS Linear Shaft Motors are suitable for life sciences and industrial applications. Unit comes with single winding and has 25 mm diameter. Motor offers 2 m maximum stroke length.

Read More

Controls & Controllers, Electronic Components & Devices

Motion Control Chips offer direct upgrade paths.

May 9, 2016

Series PCD46x1A features single-axis (PCD4611A), dual-axis (PCD4621A), and quad-axis (PCD4641A) models. With respective QFPs of 48, 64, and 100 pins, chip package and terminal allocation of all three models are compatible with those of PCD46x1 series. Series PCD46x1A can also mount on same boards as previous chips. Functionality lets CPU connect to chips with 8-bit parallel bus connection or... Read More

Mechanical Power Transmission

Scaleless Linear Motor features built-in encoder.

January 20, 2016

Offering up to 5 µm resolution and repeat accuracy for positioning applications, SL083 integrates non-analog magnetic linear encoder and has 2-part design – tubular stainless steel shaft and non-contact forcer – that simplifies installation and configuration. Solution also has built-in interpolator and Hall sensors and offers real-time single processing and high dynamics without any... Read More

Controls & Controllers, Electronic Components & Devices

RoHS-Compliant Motion Controller Chips have 4-wire SPI interface.

April 27, 2015

Comprising single-axis PCL6114 and 4-axis PCL6144 servo/stepper controller chips, PCL61x4 Series features SPI serial bus for 4-wire connection to augment existing 8-/16-bit parallel bus. Programmable software limits and 27 event factors are provided to initiate interrupt signal output. Along with built-in pre-registers for continuous operation, features include linear interpolation, 9 major... Read More

Mechanical Power Transmission

Bipolar Stepper Motors come in 10 mm and 20 mm diameters.

December 13, 2012

Rated at 2.7 V, Model PFC10 features 1.0 mN-m holding torque, starting pulse rate of 960 pps, and 20 Ω resistance, while Model PFC20, rated at 8.9 V, provides 10 mN-m holding torque, starting pulse rate of 370 pps, and 100 Ω resistance. Both 2-phase, permanent magnet motors deliver 20 steps/revolution with step angle of 18°. Featuring thin stack design, Model PFC20T provides 4.4 mN-m... Read More

Mechanical Power Transmission

Stainless Steel Linear Actuator suits food-grade applications.

August 24, 2012

Available in models with 16 or 25 mm shaft diameter and various coil windings, IP69K-rated Hygienic Green Drive has FDA food grade certified guides and built-in feedback electronics. Motion control product, suited for harsh and washdown environments, offers rated forces from 8.4-96.1 N, acceleration (peak) forces from 33.7-384.5 N for 40 sec, and currents from 0.53-1.85 A. It supports integration... Read More

Mechanical Power Transmission

Linear Servo Shaft Motor delivers up to 3,100 N of force.

April 20, 2012

Able to achieve sub-micron resolution, S605 Linear Shaft Motor is available with double, triple, or quadruple windings and has acceleration force range of 1,000-3,100 N and acceleration current from 34-35 A. Acceleration force and current can be maintained for up to 40 sec. Rated for 420-780 N continuous force and 8.4-8.8 A continuous current, motor has 60.5 mm dia shaft and is available with... Read More

Mechanical Power Transmission

Linear Direct Drive Actuator suits high-performance applications.

January 26, 2012

Green Drive comes in 2 sizes, G16x and G25x series, with respective 16 and 25 mm dia shaft (magnets). Acceleration force is rated up to 600 N for 40 sec, and effective stroke lengths range from 10-1,540 mm. Cooling systems can increase rated force up to 20%, and products feature nominal rated force from 13-150 N and position repeatability of ±0.05 mm. Position sensors, temperature sensors,... Read More

Controls & Controllers

Motion Control Board registers up to 32 operation profiles.

November 23, 2011

Used for 2-phase bipolar stepper motors, FMC32 is comprised of controller with integrated NP3775E3 driver and LSI PCD2112 chip for controlling serial bus. Board can register up to 32 operation patterns (s-curve and linear) and up to 256 steps in execution sequence in internal memory and automatically processes patterns and sequences without external PC. Due to built-in CPU, users can repeat... Read More

Controls & Controllers

Bipolar Chopper Driver Board offers up to 1/16 microstepping.

October 26, 2011

Measuring 43.34 x 43.43 x 18.4 mm, Model NPAD10BF offers up to 1/16 microstepping on 2-phase tin-can, linear, and hybrid stepper motors. Unit accepts lead wires and can also be mounted directly to back of NEMA 17 hybrid motors using 2 pre-machined mounting holes. Operating on input voltage of 12-30 Vdc, board features peak output current of 1.2 A/phase, isolated input signals, on-board switching... Read More

Mechanical Power Transmission

Linear Shaft Motor meets needs of high-precision applications.

August 11, 2011

With 4 mm dia shaft and stroke lengths to 40 mm, model S040 suits small-scale applications. It provides up to 0.98 N continuous force, 0.6 Arms continuous current, 3.8 N acceleration force, and 2.2 Arms acceleration current. Regardless of winding size, servomotor has width of 10 mm and forcer length of up to 79 mm. Designed for minimal heat generation, product uses all magnetic flux and has no... Read More

Mechanical Power Transmission

Brushless Stepper Motor suits high torque applications.

July 18, 2011

Featuring 2-phase, tin-can style design, Model PF55 is available with both unipolar and bipolar windings. With unipolar winding, unit offers holding torque of 120 N, while bipolar winding provides 150 N of holding torque. In full-step excitation mode, motor has 48 steps/rev, rated voltage of 5 and 12 V, inductance from 12-37 mH, and 5-36 W resistance. Gearhead version,... Read More

Material Handling & Storage, Mechanical Power Transmission

Linear Shaft Motor Stage offers nanoprecision.

June 27, 2011

Integrating slide guide, encoder, and coreless direct drive linear shaft motor, single-axis Model SCR100 provides 100 lb load capacity, 50-300 mm stroke, and bi-directional repeatability of ±1 count. Moving magnet design locates all cables and connectors in stationary base, eliminating motion errors due to cable forces. Precision ground cross roller way provides stiffness and smooth motion,... Read More

Controls & Controllers, Electronic Components & Devices, Mechanical Power Transmission

Unipolar Voltage Driver supports high-speed motor applications.

June 16, 2011

Supplied in EMP16 package, NP2671E2 allows for 60 V max motor output so that user cannot exceed phase output margin of motor. Constant voltage driver, intended for stepper motors with unipolar windings, provides 2-channel x 500 mA continuous output current and features pulse input (Pulse/Dir) system that lets user switch between half and full step modes. Additional features include 0.35 A/phase... Read More

Controls & Controllers, Electronic Components & Devices

Pulse Generator Chip drives stepper and servo motors.

June 1, 2011

Providing 18 operating modes, Model PCL6045BL controls up to 4 axes as well as linear interpolation of 2-4 axes and circular interpolation between any 2 axes. Chip also offers operation correction, backlash correction, programmed soft limit, and ability to override pulse rate during operation. With max output of 6.5 Mpps and 19.6608 MHz standard reference clock, chip is suited for... Read More

Mechanical Power Transmission

Stepper Motor offers high torque in a thin stack package.

May 13, 2011

Featuring 48 steps/revolution and unipolar winding, Model PFC35TH measures 15 mm at its widest point and offers max holding torque of 33 mNm. Unit features rated voltage of 9 V, starting pulse rate of 400 pps, slewing pulse rate of 470 pps, and 37 W resistance. With total height of 27 mm, tin-can rotary motor is suited for printing, packaging, and medical devices. Read More

Mechanical Power Transmission

Linear Servomotor features 50 mm long forcer.

April 25, 2011

Model L250SS Linear Shaft Motor has non-critical air gap up to 5 mm, which allows for flexible machining and installation. This also allows flexibility over length of stroke and is beneficial in applications that may cause build-up on shaft. Stroke lengths of 100-3,750 mm are available and unit is offered with continuous forces of up to 24 N and peak force of up to 94 N. Able to achieve... Read More

Mechanical Power Transmission

Linear Shaft Motor achieves sub micron resolution.

April 11, 2011

Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90° angle. Because it has no cogging issues and does not produce Eddy currents, motor does not dump heat into work point, which enables it to achieve sub micron motion profiles. Lack of inherent airflow... Read More

Mechanical Power Transmission

Linear Stepper Motor simplifies linear motion system design.

April 5, 2011

Model PFL35T LINEARSTEP® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution.... Read More

Material Handling & Storage, Mechanical Power Transmission

Single-Axis Linear Stage targets space-constrained applications.

March 29, 2011

SLP Acculine series incorporates linear shaft motor into all-inclusive stage to facilitate transition from traditional linear motion systems, including ball-screws, belt and chain drives, and pneumatic actuators. Intended for applications with limited space low-profile product integrates shaft support within housing and is engineered to have minimized dead zone. Offering sub micron resolution,... Read More

Other Company News from
Nippon Pulse America, Inc.