CLARCOR Air Filtration Products, Inc.
Jeffersonvlle, IN 47130
Share:
Pleated Panel Filters won't delaminate, buckle, or collapse.
Able to snap back to original shape if damaged or deformed with no loss of structural integrity, X-Treme(TM) filters employ self-supported media that offers moisture resistance and eliminates need for expanded metal backing. Inherent media strength and stiffness result in consistent pleat shape, spacing, and height. Fully incinerable products, rated MERV 7, do not support microbial growth or...
Read More »
Air Filters feature self-sealing, leak-free design.
Designed with layers of multi-denier polyester fibers, Activator Series ring panels and links capture particles throughout filter's depth. Units come in 2, 3, and 4-ply models to meet requirements of MERV 6, 7, and 8, respectively. Media layers are heat-sealed around 9-gauge internal wire frame with cross wire supports to hold media in place. Tackified adhesive is applied to air-leaving side of...
Read More »
Paint Arrestor protects people, stacks, and property.
StackguardÃ-® overspray media offers 99% efficiency for wide range of paints, coatings, and glazes. It incorporates fiber glass media for high paint holding capacity and polyester backing for high particulate efficiency. Media holds 35 times its weight in paint particulate overspray, and has tensile strength three times higher than paper-backed medias as per ASTM #D-1682. The 2 in. unit has...
Read More »
Mini-Pleat Air Filter suits industrial applications.
Suited for commercial use, UL Class 2 Variflow II-M products are extended surface, rigid cell filters with metal cell sides and mini-pleat construction. Microglass fiber media, in addition to water-repellent binder, allows product to sustain efficiency under high-humidity conditions. Suited for turbulence, variable air volumes, and frequent fan shutdowns in air handling systems, filters are...
Read More »
Filter suits HVAC and turbine intake applications.
Vari+PlusÃ-® VP uses Dura-Tuff 100% synthetic media in dual layer for efficiency at MERV 15. Featuring all-plastic construction with no rivets, screws, faceguards, or cross bars, extended surface filter is moisture- and chemical-resistant. Media is resistant to tearing, abrasion, and rough handling. Classified Underwriters Class 2, filter withstands high air flow, variable air volume,...
Read More »
Air Filter eliminates odors using two processes.
Available in 2 and 4 in. thicknesses, Fresh Air Supreme uses chemically-enhanced carbon to remove odors and compounds, including diesel fumes, mercaptans, sulphurous odors, hydrogen sulfide, acid gases, and VOCs. Unlike conventional activated carbon that relies exclusively on physical adsorption, media used in Fresh Air Supreme captures odors through chemical reaction and adsorption. Media is...
Read More »
Dust Cartridges feature 100% spun bond polyester media.
Dust Cartridges for Pulse Jet dust collectors are washable for repeated use and resist most chemicals, including acids, alkalis, oxidizing agents, and solvents. Media is long-wearing, resistant to abrasion, and provides dust cake release characteristics. Aluminized media is offered for static dissipation and for cartridges used in powder coating operations. PTFE laminated media is suited for...
Read More »
Filter Cartridges utilize spun-bond polyester media.
Suitable for pulse-jet dust collectors, cartridges are made with 100% spun-bond polyester media. Media filters fine particulates, has good dust-cake release characteristics, and resists abrasion. Cartridges are washable for repeated use and resistant to many acids, alkalis, oxidizing agents, and solvent.
Read More »
HEPA and ULPA Filters meet stringent air purity requirements.
Microguard 99 Filters eliminate particles down to 0.3 microns with efficiencies of 99.97, 99.99, and 99.999%. Microglass fiber media is waterproof and heat-resistant to 1,000Ã-
Read More »
Self-Supporting Pocket Filters use polyester media.
Airguard filters use media that resists moisture, will not sag, and is coated with non-drying adhesive for optimum particle collection without sloughing. Internal wire frame is self-gasketing and self-sealing. Products maintain shape in all airflow conditions and install without clips or latches. They do not shed and will not support microbial growth. Styles include Uni-Cube and Tri-Cube filters...
Read More »Pleated Panel Filters won't delaminate, buckle, or collapse.
Able to snap back to original shape if damaged or deformed with no loss of structural integrity, X-Treme(TM) filters employ self-supported media that offers moisture resistance and eliminates need for expanded metal backing. Inherent media strength and stiffness result in consistent pleat shape, spacing, and height. Fully incinerable products, rated MERV 7, do not support microbial growth or...
Read More »
Air Filters feature self-sealing, leak-free design.
Designed with layers of multi-denier polyester fibers, Activator Series ring panels and links capture particles throughout filter's depth. Units come in 2, 3, and 4-ply models to meet requirements of MERV 6, 7, and 8, respectively. Media layers are heat-sealed around 9-gauge internal wire frame with cross wire supports to hold media in place. Tackified adhesive is applied to air-leaving side of...
Read More »
Paint Arrestor protects people, stacks, and property.
StackguardÃ-® overspray media offers 99% efficiency for wide range of paints, coatings, and glazes. It incorporates fiber glass media for high paint holding capacity and polyester backing for high particulate efficiency. Media holds 35 times its weight in paint particulate overspray, and has tensile strength three times higher than paper-backed medias as per ASTM #D-1682. The 2 in. unit has...
Read More »
Mini-Pleat Air Filter suits industrial applications.
Suited for commercial use, UL Class 2 Variflow II-M products are extended surface, rigid cell filters with metal cell sides and mini-pleat construction. Microglass fiber media, in addition to water-repellent binder, allows product to sustain efficiency under high-humidity conditions. Suited for turbulence, variable air volumes, and frequent fan shutdowns in air handling systems, filters are...
Read More »
Filter suits HVAC and turbine intake applications.
Vari+PlusÃ-® VP uses Dura-Tuff 100% synthetic media in dual layer for efficiency at MERV 15. Featuring all-plastic construction with no rivets, screws, faceguards, or cross bars, extended surface filter is moisture- and chemical-resistant. Media is resistant to tearing, abrasion, and rough handling. Classified Underwriters Class 2, filter withstands high air flow, variable air volume,...
Read More »
Air Filter eliminates odors using two processes.
Available in 2 and 4 in. thicknesses, Fresh Air Supreme uses chemically-enhanced carbon to remove odors and compounds, including diesel fumes, mercaptans, sulphurous odors, hydrogen sulfide, acid gases, and VOCs. Unlike conventional activated carbon that relies exclusively on physical adsorption, media used in Fresh Air Supreme captures odors through chemical reaction and adsorption. Media is...
Read More »
Dust Cartridges feature 100% spun bond polyester media.
Dust Cartridges for Pulse Jet dust collectors are washable for repeated use and resist most chemicals, including acids, alkalis, oxidizing agents, and solvents. Media is long-wearing, resistant to abrasion, and provides dust cake release characteristics. Aluminized media is offered for static dissipation and for cartridges used in powder coating operations. PTFE laminated media is suited for...
Read More »
Filter Cartridges utilize spun-bond polyester media.
Suitable for pulse-jet dust collectors, cartridges are made with 100% spun-bond polyester media. Media filters fine particulates, has good dust-cake release characteristics, and resists abrasion. Cartridges are washable for repeated use and resistant to many acids, alkalis, oxidizing agents, and solvent.
Read More »
HEPA and ULPA Filters meet stringent air purity requirements.
Microguard 99 Filters eliminate particles down to 0.3 microns with efficiencies of 99.97, 99.99, and 99.999%. Microglass fiber media is waterproof and heat-resistant to 1,000Ã-
Read More »
Self-Supporting Pocket Filters use polyester media.
Airguard filters use media that resists moisture, will not sag, and is coated with non-drying adhesive for optimum particle collection without sloughing. Internal wire frame is self-gasketing and self-sealing. Products maintain shape in all airflow conditions and install without clips or latches. They do not shed and will not support microbial growth. Styles include Uni-Cube and Tri-Cube filters...
Read More »