Dyneon - A 3M Company
Oakdale, MN 55128
Share:
Additives improve HPDE extrusions.
Dynamar(TM) Polymer Processing Additives are suitable for use in polyethylene extrusion applications to eliminate melt fracture and die build-up. In HDPE pipe extrusion, Dynamar FX 5911, FX 9613, and FX 5920B increase output by reducing backpressure during processing. Additives also improve processibility of blown and cast films, blow molded bottles, drums and tanks, extruded pipes and tubes,...
Read More »Fluoropolymer Series suits semiconductor industry.
PFA-FLEX UHP provides tubing, fittings, and components with environmental stress crack resistance. Capable of temperatures up to 500Ã-
Read More »PFA Resin resists cracking in presence of fluoropolymers.
PFA-FLEX series ultra-high purity (UHP) PFA resin suits semiconductor processing applications that require environmental stress crack resistance. It provides chemical and temperature resistance as well as low levels of extractable ions. Flexible PFA-FLEX material is available in two grades: PFA-FLEX X 8502 UHP, with nominal 2 melt-flow index for tubing applications, and PFA-FLEX X 8515 UHP, with...
Read More »Custom Compounds produce speckled parts.
Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500Ã-
Read More »Fluorothermoplastics insulate wires and cables.
FEP 6322 and PFA X 6525 high-performance fluorothermoplastics have good melt flow index, allowing high processing speeds for wire and cable jacketing. Both enable very thin walls of up to 100 Ã-µm, are resistant to chemicals and are nonflammable. Cables insulated with fluorothermoplastic meet requirements of standards VDE 0207, Part 6 and CEI 20-51. Service temperature range is up to 205Ã-
Read More »Elastomers withstand basic and amine environments.
Models BRE 713 IX, BRE 7132X, BRE 723 IX and BRE 7410X base-resistant elastomers are formulated to withstand conditions found in basic and amine-containing environments, most notably those involving lubricating fluids in the automotive industry such as molding gaskets, seals and O-rings. They resist amine packages found in ATF fluids, gear lubricants, engine oils and other fluids while offering...
Read More »Dyneon LLC Names Netha N. Johnson President and General Manager
OAKDALE, Minn. - October 1, 2007 - Dyneon, one of the world's leading fluoropolymer suppliers, announces that Netha N. Johnson has been named president and general manager. As president and general manager of Dyneon LLC, Johnson will be responsible for the global achievement of Dyneon's business objectives. Johnson takes over the role of president from Bill Myers, who in August of 2007, was named...
Read More »Chemtech Specialties Inc. to Distribute Dyneon Polymer Additives
OAKDALE, Minn. - Nov. 1, 2006 - Dyneon LLC, one of the world's leading fluoropolymer producers, announces the appointment of Chemtech Specialties Inc. as an authorized distributor of the company's polymer additive products focusing on the northeastern United States. Polymer additives from Dyneon's Specialty Additives business are used in engineered plastics applications to achieve critical...
Read More »Dyneon USA Operations Re-Certified for ISO 9001
OAKDALE, Minn--Aug. 4, 2006--Dyneon, one of the world's leading fluoropolymer producers, has been re-certified as ISO 9001:2000 compliant at its U.S. facilities after a multilocation audit by DQS USA, a global registrar in independent third party management system certification. According to Dyneon LLC Quality Manager Susan Wheeler, DQS has recommended Dyneon's Oakdale, Minn., Aston, Pa.,...
Read More »Dyneon Opens Polymer Processing Additives Laboratory in Bangalore
OAKDALE, Minn. - March 31, 2006 - Dyneon, one of the world's leading fluoropolymer producers, has opened a new polymer processing additives laboratory in Bangalore, India, the country's fifth largest city and a key Asian industrial and business center. The new laboratory will enable Dyneon to accelerate product development, enhance productivity, and reduce cycle times for Asian customers by means...
Read More »Dyneon Expands Plastics Additives Laboratory in Shanghai, China
OAKDALE, Minn. - March 31, 2006 - Dyneon, one of the world's leading fluoropolymer producers, has expanded capabilities at their plastics additives laboratory in Shanghai, China. This laboratory has been in operation since 2000, serving the needs of plastics and packaging manufacturers in China and around the Pacific Rim. The newest laboratory systems enable Dyneon to provide even more product...
Read More »Dyneon Names Specialty Additives National Sales Manager
OAKDALE, Minn. - March 31, 2006 - Dyneon, one of the world's leading fluoroploymer producers, recently named Janice Bennett as national sales manager, Specialty Additives. In her new role, Bennett will be responsible for directing North American Specialty Additives' sales activity in polyethylene processing and field sales development of new applications in adjacent markets, including blow...
Read More »Additives improve HPDE extrusions.
Dynamar(TM) Polymer Processing Additives are suitable for use in polyethylene extrusion applications to eliminate melt fracture and die build-up. In HDPE pipe extrusion, Dynamar FX 5911, FX 9613, and FX 5920B increase output by reducing backpressure during processing. Additives also improve processibility of blown and cast films, blow molded bottles, drums and tanks, extruded pipes and tubes,...
Read More »Fluoropolymer Series suits semiconductor industry.
PFA-FLEX UHP provides tubing, fittings, and components with environmental stress crack resistance. Capable of temperatures up to 500Ã-
Read More »PFA Resin resists cracking in presence of fluoropolymers.
PFA-FLEX series ultra-high purity (UHP) PFA resin suits semiconductor processing applications that require environmental stress crack resistance. It provides chemical and temperature resistance as well as low levels of extractable ions. Flexible PFA-FLEX material is available in two grades: PFA-FLEX X 8502 UHP, with nominal 2 melt-flow index for tubing applications, and PFA-FLEX X 8515 UHP, with...
Read More »Custom Compounds produce speckled parts.
Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500Ã-
Read More »