
Welding System offers push-pull wire welding module.
Millermatic-® 251 welding system is offered with wire welding module that mounts directly to side of unit, enabling 12 in. spools of aluminum wire with .035 or .047 in. dia to be run on internal wire system. System permits unit to connect directly to XR-Edge and XR-A pistol guns with 15 or 30 ft cables. Push-pull design allows for consistent feeding of aluminum wire by providing constant torque...
Read More »Wire Feeders accept 8 and 12 in. spools.
SuitCase(TM) 8RC and 12RC remote voltage-control wire feeders weigh between 22.5 and 25 lb, permit wire spools in 8 and 12 in. sizes, and perform MIG and flux-cored welding with wires from .023 to 5/64 in. in dia. They are suited for construction, manufacturing, and shipbuilding applications.
Read More »
Diesel Welder suits cross-country pipeline welding industry.
Pipeliner® 200D, with all-copper windings, is powered by 4-cylinder, water-cooled Perkins 104.22 engine. It provides 200 A of DC power at 60% duty cycle as tested at 104°F, allowing for welding up to 7/32 in. low hydrogen electrodes. Capable of performing stick and TIG welding and arc gouging, unit has DC generator that provides 1,750 W of DC auxiliary power. Offerings include automatic...
Read More »
Welding Generator has fuel tank that lasts all day.
Stick, TIG, wire, and pipe-welding Ranger(TM) 305D has enclosed case, Chopper Technology(TM), and 12 gal fuel tank. Powered by 3-cylinder Kubota-® D722 diesel engine, it delivers 9,500 continuous W of 120/240 Vac generator power. Multi-process 300 A dc diesel-engine drive welder offers arc-control adjustment, plus fuel pump with air-bleed system that eliminates manual air bleeding if tank is run...
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »Welding Tool suits flexible thermoplastic applications.
Semi-automatic LeisterÃ-® TriacDrive Overlapp Welding Tool features motorized hand-steered drive with knurled steel roller that allows constant nozzle position and speed to assure consistent seam weld at speeds to 10 fpm. Triac S hot air tool provides adjustable temperatures from 70 to 1400Ã-
Read More »
Vibration Welder handles large, thermoplastic parts.
Wide Bed Linear Vibration Welder offers 72 in. wide, 2-speed, variable-force hydraulic lift table and industrial computer with 10.4 in. operator touch panel. Windows(TM)-based software interfaces with Allen-Bradley PLC. System is capable of welding by time, distance, or energy. Weld-graph screen charts wattage, energy, and distance trending. Variable output frequency range is 200-250 Hz and...
Read More »
Ultrasonic Welder quickly assembles filter bags.
RingMaster(TM) Filter Bag Machine attaches filtration media to rigid plastic circular frames, using three 20 kHz ultrasonic modules and 1500 W power supplies. Three welding heads are spaced 120Ã-
Read More »
Welding System offers remote WFS/voltage control.
Delta-FabÃ-® MIG/flux cored welding system offers 375 A welding power at 100% duty-cycle, 50 to 500 A. Unit produces 10 to 45 open circuit volts to combat voltage drops when power source is stationed away from workspace. Acceptable wires include .035-.045 in. hard and stainless steel wires and 1/16 in. flux cored wires. Drive roll system provides positive feeding for wires .045 and larger and...
Read More »
TIG Welder features adjustable balance control.
Syncrowave-® 180 SD TIG/Stick power source allows operators to preset welding amperage with digital meters. Output is 10 to 180 A in both AC and DC TIG welding mode. Selectable arc start function controls initial volume of current to create soft start, standard start, and hot start. Adaptive Hot Start feature automatically increases amperage during arc start when required. Fan-On-Demand cooling...
Read More »
Pipe Welding System is portable for use in field.
Model 510 Pipemaster automates pressure pipe welding for pipes 1 in. and larger. GTAW process weld heads make multiple pass welds on pressure piping where pipe cannot be rotated. Unit incorporates 300 A power source with weld head controls and microprocessor programming capability. Controls are provided for weld Head rotation, arc voltage control, torch oscillation, and filler wire feed....
Read More »
Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »