Portable DC Inverter offers constant-current output.

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Read More »
Inverter Welding System suits MIG and flux-cored welding.

Inverter Welding System suits MIG and flux-cored welding.

Power Wave(TM) 355/Power Feed(TM) 10 Welding System is comprised of digitally-controlled inverter power source and industrial wire feeder. It provides control of welding parameters and allows user to select welding output waveform using Mode Selector Switch. Inverter offers 350A at 60% duty cycle. Power Feed 10 features 4-driven rolls in heavy duty drive system for feeding every wire type. Guide...

Read More »

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Stick/TIG Inverter provides simple operation.

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
Welding machine offers multi-process welding portability.

Welding machine offers multi-process welding portability.

Thermal Arc(R) Pro-Plus(R) 400MST welding machine weighs less than 50 lbs. It offers single knob weld output control and process selection button. Controls are all digital, and process key allows operator to choose between welding with MIG and flux cored wires, stick, lift and scratch TIG and carbon arc gouging. Up to five welding programs can be stored and recalled. Model 400 MSTW accepts...

Read More »
Arc Welder is driven by gasoline engine.

Arc Welder is driven by gasoline engine.

Pipeliner 200G provides 200 A dc at 60 percent duty cycle. It has 5 current ranges with overlap in each range for stick-pipe welding and arc welding processes where slope control is desired. It uses General Motors 3.0 liter, 4-cylinder, water-cooled, industrial gasoline engine with 46 hp at 1,600 rpm. Dc exciter supplies pure dc current to welding generator, and 100 RPM high-idle adjustment...

Read More »
Weld Control connects to submerged-arc power sources.

Weld Control connects to submerged-arc power sources.

HDC(High Deposition Controller) 1500 automatic weld control interfaces with AC or DC constant currents or constant-voltage power sources having remote contactor and output control. Unit offers true crater condition, burnback, and independent run-in and jog speed control. Five HDC 1500 packages include choice of power source, shunt control, cable kit, RAD wire drive assembly, wire straightener,...

Read More »
MIG Welding Guns work in high heat applications.

MIG Welding Guns work in high heat applications.

Air-cooled Spray Master(TM) guns are available in 250, 350 and 450 A models. All come with heavy-duty contact tips and diffusers. Short conductor tubes allow operator to get closer to work piece. Guns are rated at 80% duty cycle with argon/CO2 gases. 350 and 450 A models are available with optional locking or dual schedule triggers.

Read More »
Weld Head provides high purity welding of micro-fittings.

Weld Head provides high purity welding of micro-fittings.

UHP Mini-Micro(TM) Orbital Weld Head can be used to weld micro-fittings and tubing from 1/8 to 1/2 in. OD. Water-cooled design ensures long-term operation at 100% duty cycle with no damage to head. Unit features vise clamping tool steel jaws and narrow profile. Weld heads up to 6 in. OD are also available.

Read More »
Weld Head offers scissors clamping mechanism.

Weld Head offers scissors clamping mechanism.

Scissors-Lock Orbital Weld Head provides alignment for precision welding of tube up to 6 in. OD. It features heavy-duty construction, reliable arc starting, and efficient gas coverage for clean welds. Micro-weld heads down to 1/8 in. OD are also available.

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics