Welder/Generator is offered with Deutz engine.
With Deutz D2008L4 4-cylinder, water-cooled diesel engine, Vantage-® 300 delivers dc welding output of 300 A at 32 V, 100% duty cycle. Engine runs at 1,800 rpm and is rated at 24 hp. It generates 12.5 kW peak, 3-phase, 240 Vac auxiliary power and 11.5 kW peak, single-phase ac auxiliary power. Fuel tank capacity of 15 gal enables Vantage 300 to run all day. Four process modes include CC-Stick,...
Read More »
Resistance Welders handle small to medium sized parts.
Available in 16, 32, and 48 in. widths with 16 in. upper and lower platen depth, M-Series welds various materials, including steel and stainless steel, and can incorporate multiple guns for custom resistance, spot, or projection welding. Small footprint offers mobility via forklift pockets and accessibility for tooling changeover. Features include X-Y servo driven fixtures and light curtains and...
Read More »
Hybrid Welding System combines laser with GMAW.
Hybrid Laser Arc Welding combines deep weld penetration and low heat input of laser welding with power efficiency and gap tolerance of GMAW (gas metal arc welding). Adding GMAW in tandem with laser and filler metal creates wider weld bead and enhances metallurgical stability. Mechanized system utilizes laser only, laser with cold wire fill, or hybrid laser arc welding in 2D gantry, 3D robotic, or...
Read More »
Automated Welding System combines flexibility and precision.
Column & Boom (CaB) series is offered in 3 models, each with different profile and working range from 2 x 2 m up to 10 x 8 m. Column is capable of -
Read More »
7500 Series FiberStar Fiber Diode Micro-Welding Workstation
7500 Series FiberStar Workstations offer a significant competitive advantage for today's medical device and micro component assembly marketplace. Fiber Diode technology produces a sharp, focused light beam that consistently melts a very small area of metal. The benefit of this technology is that very little heat is generated at the weld point allowing users to easily weld > 0,05mm from the most...
Read More »
Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the Sycrowave-® 200 AC/DC TIG/Stick welder, the Spectrum-® 1251 plasma...
Read More »
Weldcraft to Showcase TIG Welding Products at 2006 Fabtech International/AWS Welding Show
APPLETON, Wis., 25 July 2006-Weldcraft will showcase its TIG welding products in Booth # 24044 at the Fabtech International/AWS Welding Show in Atlanta, October 31 to November 2. Products to be exhibited include the company's upgraded WP17 Series of TIG torches, new (WP17, 18, 20 and 26) torch packages and a line of tungsten. Weldcraft's Legacy Series of TIG torches will also be on display....
Read More »
TIG Torch offers 70
Suited for limited access joints, air-cooled Model WP-50 is rated at 60% duty cycle up to 50 A and offers pen-like control in tight quarters and on paper-thin material. Entire torch is 8-½ in. long and -¾ in. diameter at widest point, with 5/8 in. long x 3/8 in. dia torch head. Compatible tungsten sizes include .020, .040, and 1/16 in. diameters. Torch can be ordered with 12.5 or 25 ft power...
Read More »Welding System is available in various configurations.
Ready-Pak(TM) kits are available in 4 configurations with various power sources to meet application needs. All kits include LF-72 wire feeder featuring 2-roll MaxTrac(TM) drive system for accurate wire feeding. Other components are power source, drive rolls and wire guide, wire feeder control cable, welding gun, work lead and clamp, and Harris-® Flowmeter/Regulator and gas hose. Two kits also...
Read More »Robotic Cell welds small- to medium-sized parts.
Dual, fixed-table eCell(TM) system is capable of MIG, Synergic MIG, MIG Pulse, and flux-cored arc welding procedures on parts that can be welded without reorientation. It welds variety of materials including steel, stainless steel, and aluminum. Digitally-controlled, 350 A inverter welding power source is capable of high-speed communication and is delivered with 60+ factory-programmed waveforms...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »