New Welders Products

Plastic Welding System offers automatic tooling protection.

Featuring rigid cast alloy column, Ultrasonic Model K35-XT combines computer control, position sensing, and servomotor control to prevent accidental horn to fixture contact. System enables consistently high joint strength by automatic compensation for part variation within tolerances during weld cycle. With operating frequency of 35 kHz and supply voltage of 230 Vac, Model K35-XT produces 900 W...

Multi-Process Welder offers gasoline engine.

With fully enclosed case, Ranger-® 250 is available with Robin/Subaru 20.5 hp OHV gasoline engine that operates at noise levels to 101.9 dBA at full load. Product provides 250 Adc and 275 A CV output at 100% and 60% duty cycle, respectively. Multi-process dc welder features 4 welding modes, delivers 9,000 W peak and 8,500 W continuous ac auxiliary generator power, and incorporates Chopper...

Stud Welder makes welds without reverse side marring.

With weld times of 0.01 sec and charge time of under 3 sec, Capacitor Discharge (CD) 110 Stud Welder may be used for contact and gap CD stud welding. Abbreviated weld time minimizes heat buildup, resulting in minimal discoloration, burning, or reverse side dimples. Unit achieves single-sided welds with minimal distortion on materials as thin as 0.020 in. and offers 110,000 -µF of user-selectable...

AC/DC Welder offers 250 A output.

Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects Kohler-® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...

An Operations Manager's Guide To The Mobile Connected Factory of Tomorrow

This white paper provides an overview of mobile technology for managing your manufacturing facility, while also discussing the advantages of being an early adopter.

Power Sources provide pulsed MIG welding.

Millermatic-® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units are...

Spot Welder uses middle-frequency inverter technology.

Middle Frequency Inverter Spot Welder is available in Projection or Spot Weld models from 32-240 KVA, rated at 50% duty cycle with max welding currents to 88,000 A secondary. Middle Frequency (1,000 Hz) Inverter technology employs weld times measured in milliseconds to deliver continuous, constant weld current, resulting in homogeneous development of weld nugget and cosmetic appearance of weld....

Welding Station offers pre-fabrication of tube and pipe.

TIGER Welding Station allows single operator to handle 6 m lengths of tube or pipe during welding operation. Tube/pipe clamp, located on Easi-Glide X-Y slide, rotates to allow 45-

Laser Packages cut and weld machine tools.

Models C5000-E and C6000-E are carbon dioxide laser sources offering 5 kW and 6 kW power. Laser source, CNC, and servomotors are integrated and interfaced as complete system. Laser communicates with CNC via optical bus, and all laser control and diagnostics are integrated into CNC. Historical data for maintenance purposes is logged and can be accessed via CNC screen. Both laser packages can...

Welding System uses digital communication protocol.

Multi-process Power Wave-® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink-® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...

Welder delivers 10,000 peak watts.

Eagle(TM) 10,000 provides stick welding, basic DC TIG welding, and auxiliary power. Operators can simultaneously weld and use AC generator power for lights, tools, and emergency standby power. Rated 210 A/25 Vdc, unit is equipped with 2-cylinder, 4-cycle, 20 hp, OHV air-cooled Kohler gasoline engine. Welder includes 20 ft No. 2 electrode cable, electrode holder, 15 ft No. 2 work cable, and work...

Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance

Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.