Multiprocess Inverter has built-in pulsed MIG capabilities.
Arc / Resistance Welders

Multiprocess Inverter has built-in pulsed MIG capabilities.

XMT 350 MPa multiprocess inverter features built-in pulsing and arc controls that let user control weld puddle fluidity, weld bead profile, and arc length. Providing 5-425 A output, it offers pulsed MIG, MIG, flux-cored, stick, DC TIG, and air carbon arc gouging capabilities. Unit enables welding with voltage sensing feeder where wire feed speeds are 200 ipm or greater, allowing operator to weld...

Read More »
Arc / Resistance Welders

MIG Welder combines 2 standard welding processes.

Combining plasma arc and MIG arc processes into one hybrid process, Super-MIG(TM) is capable of welding most standard MIG, Plasma, and Laser applications. Unit includes interface that is compatible with robot controllers and can store multiple welding programs, Super-MIG(TM) Torch, and Super-MIG(TM) Torch Cleaning Station that works automatically within robotic welding cell. It can be used to...

Read More »
Inverter features built-in pulsed MIG programs.
Arc / Resistance Welders

Inverter features built-in pulsed MIG programs.

Intended for high-volume manufacturers, Invision 350 MPa MIG/Pulsed MIG Inverter solves distortion, burn through, and spatter issues associated with welding light gauge material. In pulsed MIG mode, operator dials in SharpArc(TM) setting, wire and gas type, and inverter automatically sets optimal parameters. Providing 5-425 A output, unit features Auto-Line power management, which enables it to...

Read More »
Ultrasonic Spot Welders accommodate large metal parts.
Arc / Resistance Welders

Ultrasonic Spot Welders accommodate large metal parts.

Available bench mounted or adapted for robot operation, WeldMaster(TM) C-Frame I has one ultrasonic head and opposing anvil, while WeldMaster(TM) C-Frame II has 2 ultrasonic heads, one that powers welding tip and one powers anvil. Units can be operated by robot arm, which positions welder at desired weld locations, while automotive parts to be joined are held stationary in fixture. Both are...

Read More »
Electrofusion Welder monitors and records welding process.
Friction / Fusion Welders

Electrofusion Welder monitors and records welding process.

Suited for PE, PP, and PVDF pipes, Hurner Electrofusion Welding Unit includes intuitive user menu, LCD display, electrodes, and bar scanning probe that automatically sets up welding parameters and identifies pipe, fittings, and welder. Unit monitors welding process to detect errors such as heater coil shorts or power supply failure, and can record up to 1,800 welds in memory. Operating on 110/230...

Read More »
Pulsed MIG System optimizes aluminum welding process.
Arc / Resistance Welders

Pulsed MIG System optimizes aluminum welding process.

All-in-one system comes with everything necessary to weld 4000- and 5000-series aluminum: Millermatic 350P MIG/Pulse MIG welder; 25 ft, air-cooled XR(TM)-Aluma-Pro(TM) gun; reversible .035-3/64 in. u-groove drive rolls; and Teflon® intermediate guide. Millermatic 350P offers pulse programming, and calibration software syncs motor speeds in gun and power source for optimal feeding. Tension...

Read More »
Arc / Resistance Welders

Push-Pull MIG Gun optimizes aluminum welding.

Rated for welding at 300 A/100% duty cycle, Model XR-Aluma-Pro(TM) gooseneck-style air-cooled MIG gun optimizes feeding performance for 4000 and 5000 series aluminum through 2-position tension control, while water-cooled unit is rated for welding at 400 A/100% duty cycle. Both feature 3Â-¾ turn potentiometer for wire feed speed (WFS) control that can be adjusted while wearing welding gloves,...

Read More »
AC/DC TIG Welders promote optimal low-end arc starts.
AC to DC Power Supplies

AC/DC TIG Welders promote optimal low-end arc starts.

Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics