Waterjet Cutters and Cutting Machinery

OMAX Corporation Brings Waterjet Cutting Versatility and Precision to WESTEC
Waterjet Cutters and Cutting Machinery

OMAX Corporation Brings Waterjet Cutting Versatility and Precision to WESTEC

KENT, Wash., June 30, 2017 - At WESTEC 2017, OMAX® Corporation will showcase its OMAX 80X JetMachining Center with a Tilt-A-Jet® cutting head. Visitors to OMAX booth 1115 will experience how the versatility and high precision of OMAX waterjets make them an excellent complement or alternative to other conventional cutting machines. Designed to accommodate large or multiple part jobs, the 80X can...

Read More »
OMAX Showcases a New Abrasive Waterjet Line at EMO 2017
Waterjet Cutters and Cutting Machinery

OMAX Showcases a New Abrasive Waterjet Line at EMO 2017

KENT, Wash., May 22, 2017 – At EMO Hannover 2017, OMAX® Corporation will showcase the newly released GlobalMAX 1530 abrasive waterjet, in Hall 15, Stand E93. The GlobalMAX line brings value-priced abrasive waterjets with the OMAX guarantee to the global market. The OMAX 60120 and the latest generation MicroMAX abrasive waterjet systems will also be on display during the show, held September...

Read More »
Aquablast Ltd. Installs Jet Edge 5-Axis Waterjet System at its U.K. Headquarters
Waterjet Cutters and Cutting Machinery

Aquablast Ltd. Installs Jet Edge 5-Axis Waterjet System at its U.K. Headquarters

Longtime Jet Edge Distributor Plans to Showcase Waterjet Cutting Capabilities, Launch Waterjet Operation and Maintenance Training Facility ST. MICHAEL, Minn. ( December 9,2016) - Jet Edge, Inc. proudly announces that its longtime U.K. distributor Aquablast Ltd. has installed a Jet Edge EDGE X-5® 5-axis waterjet cutting system at its headquarters in Beccles, Suffolk, United Kingdom. Capable of...

Read More »
Missouri University of Science & Technology Wins WARDJet Waterjet at IMTS Tradeshow
Waterjet Cutters and Cutting Machinery

Missouri University of Science & Technology Wins WARDJet Waterjet at IMTS Tradeshow

On Tuesday, November 1st, representatives from Missouri S&T, WARDJet and Hypertherm gathered at the Rock Mechanics and Explosives Research Center (RMERC) on S&T campus to inaugurate the new WARDKit 5x5 waterjet cutting system. Unlike the other machinery in the RMERC lab, the WARDKit 5x5 waterjet was won by a student team in mid-September at the International Manufacturing and Technology Show in...

Read More »
Waterjet Cutters and Cutting Machinery

WARDJet Gives Away Two Waterjets at IMTS 2016

WARDJet just wrapped up an educational week at the IMTS tradeshow in Chicago, IL.Â-  Visitors came to WARDJet's booth for hands-on building activities, giveaways, live remote cutting demonstrations and a virtual model of Z-2543 using a Microsoft HoloLens. A large part of the buzz was related to the WARDJet Build It! Challenge, which was organized in association with the Smartforce...

Read More »
Mike Murray Driving #48 Jet Edge Chevrolet at All-American 400 in Nashville
Waterjet Cutters and Cutting Machinery

Mike Murray Driving #48 Jet Edge Chevrolet at All-American 400 in Nashville

Murrco Fabrication Uses Jet Edge Waterjet System to Cut Parts for Racing Competition Tool Carts, Job Shop Work ST. MICHAEL, Minn. – Water jet systems manufacturer Jet Edge, Inc. proudly announces that Mike Murray will drive the #48 Jet Edge/Choice Waterjet Parts Chevrolet in the All-American 400 Oct. 2 at Fairgrounds Speedway in Nashville.Â-  Additional sponsors include dtiCORE™ and...

Read More »
Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH
Waterjet Cutters and Cutting Machinery

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH

Waterjet Manufacturer Performing Live Waterjet Cutting Demonstrations, Showing Latest Waterjet Pumps, Closed Loop Water Recycling ST. MICHAEL, Minn. – Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet technology, is bringing its latest precision waterjet cutting technology to FABTECH, Nov. 16-18 in Las Vegas.Â-  Look for Jet Edge in Booth C25085 During FABTECH, Jet...

Read More »
Metal-Cutting Waterjet Pumps operate at 90,000 psi.
Waterjet Cutters and Cutting Machinery

Metal-Cutting Waterjet Pumps operate at 90,000 psi.

Used for cutting metal, aluminum, steel, stainless steel, titanium, rubber, plastic, glass, and more, KMT Streamline® PRO-III Series includes 125 and 60 hp pumps with metal-to-metal seal design and SUPRAlife metal canister. Latter isÂ- designed for protecting UHP seals, and overall design maximizes uptime and productivity. While nominally available with .016 cutting orifice, 125 hp...

Read More »
Choice Waterjet Parts Exhibiting at FABTECH Choice Supplies Waterjet Parts for All Major Brands
Waterjet Cutters and Cutting Machinery

Choice Waterjet Parts Exhibiting at FABTECH Choice Supplies Waterjet Parts for All Major Brands

ST. MICHAEL, Minn. (August 16, 2016) - Choice Waterjet Parts, a division of Jet Edge, is exhibiting at FABTECH, Nov. 16-18 in Las Vegas. Look for Choice Waterjet Parts in Booth C25085. During FABTECH, Choice will display a wide range of waterjet parts, including nozzles and orifices, UHP pump parts, cutting heads, cutting head parts, on/off valve parts, HP seal kits, swivels and much more. Choice...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers