Vises

Machine Tool Vise provides 0.001 in. repeatability.
Vises

Machine Tool Vise provides 0.001 in. repeatability.

Featuring 8.8 in. jaw opening, Model D688 produces up to 7,968 lb of clamping force with 80 lb-ft input torque. Unit is designed with precision roller bearings and alloy steel screw mechanism for even distribution of clamping force across full jaw surface. Anglock® design in movable jaw further minimizes jaw lift. Constructed with porosity-free, 80,000 psi ductile iron body, Model D688...

Read More »
Hilma NC Standard Hydromechanical Vises
Vises

Hilma NC Standard Hydromechanical Vises

Hilma's NC-series vises are superior to most standard vises, due to built-in hydraulics. With a few cranks of the handle, hydraulic pressure can be built up to 11000 lbs. of clamping force (on the largest size). Switch from clamping small to large parts quickly simply by pulling the pin on the NC vise, sliding the power unit back, and reinserting the pin. In three sizes, the NC vise is easy to...

Read More »
Hydraulic Vise offers full bi-directional actuation.
Vises

Hydraulic Vise offers full bi-directional actuation.

ProHold 4 in. double-acting, 2-station vise offers full bi-directional hydraulic actuation with up to 6,000 lb of clamp/unclamp force. Each station clamps independently, allowing various size parts to be fixtured in same machining operation. Configurable for ID/OD clamping, 1.75 in. long stroke holds odd-shaped, undercut, or large parts. Powered unclamp cycle permits vise to open even when...

Read More »
Tools

Squeeze-Off Tool for polyethylene pipe is suited for utility contractors.

Intended for Â-½-2 in. IPS and CTS pipe, PES2 IPS/CTS (No. 04303) PE Squeeze-Off tool is constructed with aluminum parts and castings and has sliding bar handles that facilitate work in tight places while increasing leverage for tightening. Stops cover common IPS and CTS pipe sizes in one stops set, while fine-pitched thread on feed screw allows for controlled squeeze with minimal effort....

Read More »
Vise Accessories provide for 30°, 45°, and 60° setups.
Vises

Vise Accessories provide for 30°, 45°, and 60° setups.

Used with standard 6 in. vise, Sine Parallels enable rectangle parts for machining to be clamped at 30°, 45° and 60° angles. They install and position with single bolt for each plate and jaw plates remain in vise while using them. Following initial setup, Sine Parallels can be changed to any other angle and also be used as a parallel. They also provide opportunity for clamping...

Read More »
"Kurt Introduces New Vises Including Ultra Precise 4 Inch Vise, Several New Workholding Devices, PLUS Integrated Gaging and Custom Workholding
Vibration Damping Mounts

"Kurt Introduces New Vises Including Ultra Precise 4 Inch Vise, Several New Workholding Devices, PLUS Integrated Gaging and Custom Workholding

At IMTS 2012, McCormick Place - West Hall, Booth 2423 Minneapolis, Minnesota: A greatly expanded lineup of advanced workholding products to improve machining productivity will by featured by Kurt at IMTS 2012. Boasting a 360°, full circle product advantage", Kurt's "must see" exhibit is at the West Hall, Booth 2423, September 10-15th. New 3400V Ultra Precise 4-Inch Vise With 6-Inch Jaw...

Read More »
Pin Vises hold miniature deburring brushes.
Vises

Pin Vises hold miniature deburring brushes.

Available in 2 styles, Pin Vise Tool Holders offer secure method of holding small diameter deburring brushes when stem diameters are too small for chucking in automated machines. Double ended Model PV460 has hexagonal locking collet and comes with 2 reversible 4-jaw chucks. Offering swivel action, Model PV467 allows for precise and consistent control during deburring and finishing operations....

Read More »
At WESTEC 2012 - Kurt Launches New 360° Product Advantages
Workholding Systems

At WESTEC 2012 - Kurt Launches New 360° Product Advantages

MaxLock(TM) 5-Axis Vise, PinLock(TM) Mounting System and Hydraulic Swing Clamping System - See At WESTEC Los Angeles Convention Center, March 27 - 29, Booth 3500 Minneapolis, Minnesota: An exciting new lineup of the world's finest Kurt workholding products will be exhibited at WESTEC 2012 in Booth 3500, March 27 - 29 at the Los Angeles Convention Center. New Kurt MaxLock(TM) Vise First And Only...

Read More »
Kurt® Industrial Products Announces USA Automated Manufacturing of Its AngLock® Vises for Shipment and Marketing in China - Kurt Also Opens Sales and Service Facilities in Shanghai China
Vises

Kurt® Industrial Products Announces USA Automated Manufacturing of Its AngLock® Vises for Shipment and Marketing in China - Kurt Also Opens Sales and Service Facilities in Shanghai China

Minneapolis, Minnesota: Kurt Manufacturing Company, Industrial Products Division, announced today the USA based automated manufacturing of precision AngLock® vises for shipment and marketing in China. Supporting this expanded USA vise production, Kurt announced the opening of sales and service facilities named Kurt Manufacturing Shanghai. Kurt has made its vise products globally competitive...

Read More »
Kurt® Industrial Products Announces USA Automated Manufacturing of Its AngLock® Vises for Shipment and Marketing in China - Kurt Also Opens Sales and Service Facilities in Shanghai China
Workholding Systems

Kurt® Industrial Products Announces USA Automated Manufacturing of Its AngLock® Vises for Shipment and Marketing in China - Kurt Also Opens Sales and Service Facilities in Shanghai China

Minneapolis, Minnesota: Kurt Manufacturing Company, Industrial Products Division, announced today the USA based automated manufacturing of precision AngLock® vises for shipment and marketing in China. Supporting this expanded USA vise production, Kurt announced the opening of sales and service facilities named Kurt Manufacturing Shanghai. Kurt has made its vise products globally competitive...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers