Vises

Omnidirectional Clamping Vise maximizes workholding strength.
Workholding Systems

Omnidirectional Clamping Vise maximizes workholding strength.

Optimized for workholding strength and performance where flatness and parallelism are critical, DX6™ CrossOver™ occupies 16.810 x 7.391 in. footprint and features full 9 in. jaw opening within inside jaw position. AngLock® design creates all-directional clamping alignment, and downward force reduces jaw deflection. While pull-type design reduces stress in body and maintains flatness...

Read More »
High-Pressure Vises support milling and grinding.
Vises

High-Pressure Vises support milling and grinding.

Manufactured to precision tolerances, Arnold High-Pressure Vises provide controllable power and dependable clamping for variety of workholding applications. All-purpose Classic Hydravise delivers up to 18,000 lb of clamping pressure, with jaw widths ranging from 3.5–8 in. Hydraulic and mechanical spindles are available, as are narrow base configurations for applications requiring close...

Read More »
Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016
Power Clamps

Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016

Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-2377 during IMTS 2016, September 12-17, 2016 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of TRIMAX vises; ultra-low profile TRIGRIP carbide grippers; the APS zero-point positioning system,...

Read More »
Kurt Workholding to Introduce New 5-Axis Vises and Expanded Line of Small Machine Table Workholding at IMTS 2016 Booth #W-2423
Tables (Furniture)

Kurt Workholding to Introduce New 5-Axis Vises and Expanded Line of Small Machine Table Workholding at IMTS 2016 Booth #W-2423

Minneapolis, Minnesota: Kurt IMTS 2016 exhibit will feature new expanded DoveLock™ 5-axis workholding line including two new models.Â-  Also featured at IMTS, the Kurt exhibit will include the comprehensive small machine table lineup of 20 options for machine tables measuring 16 inches and under in the Y-dimension. Kurt DoveLock dovetail 5-Axis vise line is expanded with a new reverse...

Read More »
Vises

Centric Clamping Vise increases versatility via adaptability.

Available withÂ- 40, 80, or 125 mm jaw width and up to 25 kN clamping force, KONTEC KSC 80 provides optimal jaw support for ID and OD clamping. This multifaceted component, which can be adapted for conventional clamping, short clamping depths for 5-sided machining, mold parts, plates, or saw cuts, features pre-tensioned, backlash-free center bearing and extra fitted slide to...

Read More »
Vertical Vise mounts to back of host vise.
Vises

Vertical Vise mounts to back of host vise.

Available in 2 models made of 80,000 psi ductile iron, SideWinder™ provides vertical workholding without interfering with existing host vise or spindle.Â- Unit expands capabilities of 6 or 8 in. vises by adding vertical clamping above and behind host vise, and provides spindle access for secondary or final machining operations. Both models include workstop to position height of work part,...

Read More »
Reciprocating Saw Accessory aids in right angle cutting.
Clamping Systems

Reciprocating Saw Accessory aids in right angle cutting.

MM-175 Mighty-Miter(TM) consists of vee-shaped vise that secures product to be cut and clamping system that can adjusted to accept material from 3/16-2 in. Attached to Milwaukee® or DeWalt reciprocating saws, vise and clamping assembly swings up towards reciprocating blade to facilitate cutting of any material at right angle. Clamping bar has chamfer at tip to permit clamping of small rods and...

Read More »
Five-Axis Vise features 4140 steel construction.
Workholding Systems

Five-Axis Vise features 4140 steel construction.

With up to 4,000 lb of precision clamping force, DoveLock™ ViseÂ- holds parts without distorting workpiece while providing access to 5 sides of workpiece. Dovetail holding feature, requiring only 1/8 in. of material height to hold part, simplifies workpiece material preparation so that no machined jaws are necessary. For fast positioning in vise jaws, DoveLock™ features embedded...

Read More »
ROHM Showcases Prowess in Workholding Technology at EMO 2015
Clamping Systems

ROHM Showcases Prowess in Workholding Technology at EMO 2015

SUWANEE, Ga.,Â- – At EMO MILANO 2015, ROHM will present new workholding innovations that fulfill industry demands for increased efficiency, ergonomics, weight reduction and convenience. In Hall 2, Booth G18/H19, the company will showcase electrically powered clamp release units; redesigned compact vises; micro-clamping technology; lightweight key bar chucks; complete workholding solutions...

Read More »
Two-Station Vises maximize workholding productivity.
Vises

Two-Station Vises maximize workholding productivity.

Suitable for clamping parts of same size or dissimilar size, HD and HDL Series Vises have quick change jaw feature and can perform first and secondary operations simultaneously. HDL models, delivering up to 7,460 lb of clamping force at 70 lb of torque, are designed on 80,000 psi ductile iron body with precision machined steel components and have full 4 in. opening in each station using standard...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers