Vises

Workholding Vise has 9 in. jaw opening.
Vises

Workholding Vise has 9 in. jaw opening.

Built with rigid, stationary jaw, model P-688 incorporates angle-lock design that prevents lifting of movable jaw. unit also has sealed bearing system that reduces clamping pressure and increases bearing life. Bed height, matched to size 2.875 in. ±0.0005 in., has repeatability within 0.001 in.

Read More »
Vertical Vise facilitates wire EDM.
Vises

Vertical Vise facilitates wire EDM.

Model H4537, for Fixturing System 4000, provides positive clamping of one or 2 independent workpieces in same set-up. Vise incorporates 2 separate clamping jaws that require only the turning of a central screw for tightening. No supporting spacers or jackscrews are needed. Clamping jaws, with workpiece-height ranges of 0-.826 in. and .826-1.615 in., minimize obstruction above top of workpiece....

Read More »
Vises improve part-to-part machining time.
Vises

Vises improve part-to-part machining time.

Series HD double station vise is 13.75 in. x 6 in. with clamping power up to 7,800 lb, repeatable to .001 in. CarvLock manual tower vise is 16.875 in. high and comes on 300, 400, 500, or 630 mm bases. Back-to-back vises have similar height with same base sizes. Equipped with machinable, quick-change Anglock jaws in aluminum or cast iron, vises, towers, and tombstones have enclosed bodies to keep...

Read More »
Vises provide multiple locating and mounting options.
Vises

Vises provide multiple locating and mounting options.

Machine vises, available in two styles, provide jaw widths of 4 or 6 in. Twin station and MonoQuad (eight station)style designs feature fully machinable soft jaws and hardened and ground steel guideways. Mounting options include gooseneck adjustable strap clamps or Jergens Jigsaw(TM) Interlocking Plate Fixturing System which optimizes productivity of machining centers by maximizing number of...

Read More »
Workholding Vise suits small machining centers.
Workholding Systems

Workholding Vise suits small machining centers.

CarvLock(TM) HDM6 2-station vise has overall length of 13.750 in. and is designed on 80,000 psi iron base. It produces approximately 11,000 lbs of clamping force at 100 lbs of torque with repeatable clamping to .001 in. Vise is available in 2-station pallet, 4-station tombstone (back-to-back), and 8-station towers, and in manual and hydraulic models for use on vertical and horizontal machining...

Read More »
Vises

Small Clamp fits dedicated fixtures.

Low-profile Triag Micro Clamp uses dowel pins or precision dowel screws for precise positioning. Clamp delivers 900 to 4600 lb of force. Choice of smooth or serrated, hardened and ground jaws, or soft jaws provides flexibility. Parallels, locating stops, and other accessories are available.

Read More »
Hydraulic Vise clamps workpiece for machining center.
Vises

Hydraulic Vise clamps workpiece for machining center.

Arnold-Mat uses screw mechanism with integral self-contained hydraulic power booster to create up to 11,000 lb clamping pressure with little operator effort. Positive stop ensures that pressure is always the same, regardless of operator. Vises are available with optional power preset, or with hydro-pneumatic clamping mechanism that produces clamping pressure with shop air. Jaw widths of 3.54,...

Read More »
Hydraulic Vice retrofits to company's manual vises.
Vises

Hydraulic Vice retrofits to company's manual vises.

TOOLEX 4 in. Hydraulic Vise has body manufactured from 80,000 PSI ductile cast iron and ways flame hardened to 40 R/C maximum. Vise offers internalized hydraulic segment and max clamping force of 4,000 lbs. Manifold plate mounts to front of vise and has 2 ports for hydraulic connections. Jaw automatically releases to 1/4 in. upon opening. Through-hole mounting and side rails allow for vise...

Read More »
Hard Jaw Vise provides two stations.
Vises

Hard Jaw Vise provides two stations.

TOOLEX DS Series consists of 6 in. vise made of 80,000 psi ductile cast iron, 2-piece cast iron carrier jaw set, and 1018 steel standard hard jaw set. Ways are flame hardened to 40 R/C maximum. Vise capacity is 4 x 6 in. Manual break mechanism offers maximum breaking distance of 1/4 in. Through-hole mounting and side rails allow for vise mounting.

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers