Vises

Quick Change Vise Jaw System eliminates cap screws, reduces setup.

Designed for production and tool-room applications, CARVEsmart™- replaces method of attaching vise jaws to- vise using face mounted cap screws. System employs 3 channeled clamping elements with- dovetailed jaw design that couples machineable or hard jaws. Along with 4 in.- tool steel master jaw set, features include SMARTstop™ for repetitive set ups, PERMAjaw flippable ductile cast iron...

Read More »

Pull-Type Vise clamps large parts with minimal jaw deflection.

With jaw plates in standard position, HD690 featuresÂ- full 9 in. opening. Combination of AngLockÂ-® and pull-type designs reduces stress in vise body under load, promotingÂ- clamping accuracy. Jaw is rigid and stationary, top-down bolting reduces deflection, and body height reduces clamping stress. Offering clamping force from 975–5,250Â- lb using 10–80Â- lb input torque,...

Read More »
Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130

Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130

Minneapolis, Minnesota: Kurt's expanded lineup of advanced workholding products for improved machining productivity will be featured at EASTEC 2013 Booth 5130, May 14-16th. New Kurt SideWinder(TM) For Second Operation Machining Kurt's New SideWinder(TM) Vise provides vertical workholding for second operation machining in the same setup by easily mounting to the back of all Kurt industry standard...

Read More »
Modular 5-Axis Vise decreases stationary jaw deflection.

Modular 5-Axis Vise decreases stationary jaw deflection.

Equipped with AnglockÂ-® feature that minimizes part lift, MaxLock(TM) 350 holds parts with up to 10,000 lb clamping force at 60 lb-ft input torque for max rigidity and close tolerance repeatability in all axes. It enables obstruction-free, high-speed machining in all 5 axes and is constructed with steel components. Featuring 0.625 in. stroke, vise is adjustable to handle any desired clamping...

Read More »
Sponsored

6 Challenges Faced by Supply Chain Leaders in Discrete Manufacturing and How Analytics Solves Them

This eBook describes the challenges faced by Supply Chain Leaders in Discrete Manufacturing. From consumer electronics to automotive manufacturing, most of the global economy's largest industries rely on discrete manufacturing. Manufacturers in these industries face several unique challenges. The COVID-19 pandemic, followed by war, created major disruptions in supply chains worldwide, stressing the need for more integrated, transparent systems that would facilitate proactive management and faster decision-making. With supply chain issues expected to continue in 2022 and beyond, this ebook will help describe to supply chain leaders ways to prepare for certain global challenges.

Read More »
Pneumatic Vise achieves repeat accuracy up to 0.01 mm.

Pneumatic Vise achieves repeat accuracy up to 0.01 mm.

Featuring one-piece rigid base body, TANDEM KSP+64 achieves gripping forces up to 4,500 N. Unit features 64 mm footprint that allows multiple units to be closely mounted, up to 16 vises in 1 ftÂ-². Variety of jaws allows for flexibility and customization, and each jaw can stroke 2 mm in 0.06 seconds. Self-centering clamping force block is also available in 100, 160, and 250 mm sizes.

Read More »
High Density Long Vises come in 4 and 6 in. capacities.

High Density Long Vises come in 4 and 6 in. capacities.

Available in manual and hydraulic models, 4 in. Model HDLM4 is suited for machining small parts such as medical and electronic devices, while 6 in. Model HDLM6 is suited for machining larger parts such as aerospace components. Both units provide repeatable clamping in 2 clamping stations to 0.0002 in. Designed on 80,000 psi ductile iron body with precision machined steel components, vises deliver...

Read More »
High-Pressure Vise offer variable jaw and gripper clamping.

High-Pressure Vise offer variable jaw and gripper clamping.

Built on GGG 60 base with hardened and ground guideways, ALLMATIC TITAN 125 employs fully enclosed, maintenance-free, high-pressure spindle equipped with wear-resistant mechanical power intensifier. Workpieces can be changed in seconds, and torque wrench, adjustable from 6-30 Nm, is used for defined clamping. Side openings allow chips and cooling lubricant to escape, threaded holes on both sides...

Read More »

Parlec to Showcase its Innovative Technologies and Products at WESTEC 2008

Rochester, NY, January 28, 2008 - Parlec, Inc., a worldwide leader in tooling, workholding, and presetting solutions, announced it will exhibit its presetting, high-speed tooling, workholding, and driven and static solutions at WESTEC 2008 Exposition and Conference in Los Angeles, California, March 31 - April 3, 2008, Booth 2963. Parlec will showcase its Series 1500 Parsetter TMMÂ-®, the...

Read More »
Workholding Vises have 4 in. capacity.

Workholding Vises have 4 in. capacity.

Available in manual and hydraulic models, HDL 4 in. capacity vises provide high density work holding of smaller parts on smaller machining centers. Designed on 80,000 psi ductile iron body with precision machined steel components, vises are rigid and deliver up to 6,316 lb of clamping force at 70 lb of torque and repeatable clamping to 0.0002 inch. Both models feature 2 clamping stations with...

Read More »

Super Torquer Reduces Machined Clutch System Component Costs by 65 Percent Utilizing Four Kurt HD Vises -- Setup with Quick Change Jaws Hold 40 Components for Highest Density Machining

Little Falls, Minnesota: Four Kurt HDM6 double station vises mounted side by side on a vertical milling machine (VMC) gave Super Torquer Systems, Inc. reduced part machining costs of 65 percent utilizing quick change jaws and some intuitive process planning by the company's owners, Randy and Cindy Nouis. Randy and Cindy Nouis designed the clutch parts, which received a huge industry response...

Read More »

All Topics