Tube / Pipe / Hose Cutters and Cutting Machinery

Tube / Pipe / Hose Cutters and Cutting Machinery

Plasma Cutting System handles plates and tubes.

Available on accu-kut plasma plate cutting system, tube processing center provides plasma processing of tubes and pipes. When used in conjunction with robo-kut plasma beveling head, system can perform straight or bevel cuts in plate up to 2 in. thick as well as tubes and pipes from 2-6 in. square, rectangular, or round and up to 24 ft long. Featuring unitized, fully welded design, system offers...

Read More »
Automated Tube Cutting System utilizes fiber laser resonator.
Tube / Pipe / Hose Cutters and Cutting Machinery

Automated Tube Cutting System utilizes fiber laser resonator.

LT FIBER employs 2 kW IPG fiber laser source that enables system to efficiently process highly reflective materials. It also promotes productivity when working with galvanized steel and thin-walled tubes. Depending on chosen configuration, system accommodates tubes up to 6 in. dia with max raw tube lengths of 256-335 in. Automated changeover to different size tubes occurs in as little as 3 min,...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Powered Pipe and Tube Cutter eliminates need for ratcheting.

Featuring capacity up to 1 5/8 in. OD, Model TC-40 cuts polyethylene, polypropylene, PEX, rubber hose, PVC, and CPVC. Unit features 75 W motor that drives pointed X-CEL® blade to provide square, precise cut in 4 seconds. Repeat cuts can quickly follow with use of push-button blade release. Forward and reverse blade operation is possible via single trigger on front of tool. Powered by...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

ASG Medical Systems to Present at American Kuhne Spring Medical Seminar

Co-Founder Dan Woodward will demonstrate the Accu-Cut 202L, Accu-Feed 110 and the ASG/Vante Automated Tipping System and present discrete length wire and coils discussion West Palm Beach, FL - May 3, 2011 - ASG Medical Systems will participate in the Spring Medical Seminar and Open House presented by American Kuhne. The seminar will feature one day of technical discussion and one day of...

Read More »
Pipe Cutting Machine interfaces with CCTV crawler controls.
Tube / Pipe / Hose Cutters and Cutting Machinery

Pipe Cutting Machine interfaces with CCTV crawler controls.

Delivering 1 Â-¾ hp at 12,000 rpm, air-powered Titan 150(TM) cleanly cuts pipe and liner material. Cutter arm, with 2-axis, variable-speed articulation and creeping, reaches up 9 in., sweeps 400°, and also performs horizontal front cutting. Also capable of adapting to CUES CCTV crawler control equipment, system features lightweight hose design that allows travel up to 400 ft. Other...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

CSF will be exhibited at MEDTEC Europe 2011 for first time

West Palm Beach, FL - ASG Medical Systems will bring its CSF (Cut-Slit-Flare) machine to MEDTEC Europe for the first time. An advancement of the industry-standard 202L, the CSF is the only automated machine to feature all-in-one operation for cutting, slitting, and flaring thermoplastic tubing. Features: Four operating modes: Cut, Cut-and-Slit, Cut-and-Flare, and Cut-Slit-Flare Thermal and...

Read More »
Blades and Hand Knives cleanly cut tough, reinforced hose.
Tube / Pipe / Hose Cutters and Cutting Machinery

Blades and Hand Knives cleanly cut tough, reinforced hose.

Made of M2 high-speed steel, Hose Hog(TM) Hose and Tube Cut-Off Blades slice materials such as wire-reinforced hydraulic hose in automated manufacturing operations with little to no post-cut cleanup. Hose Hog Hand Knives can hack, pry, cut, shear, trim, slit, or slice materials, including hydraulic hose. They are precision ground for max cutting leverage and reduced binding through cut. Line...

Read More »
Parker Hannifin Introduces a Comprehensive Package of Hand-Operated Tools for Fabricating Small Bore Tubing Runs
Tube / Pipe / Hose Cutters and Cutting Machinery

Parker Hannifin Introduces a Comprehensive Package of Hand-Operated Tools for Fabricating Small Bore Tubing Runs

HUNTSVILLE, Ala. - Parker Hannifin Corporation (NYSE: PH), the global leader in motion and control technologies, has assembled a comprehensive and complementary package of tube fabrication tools for small bore tube assembly. The heavy duty hand-operated tools were created for use in a wide variety of industries, ranging from fluid instrumentation systems in processing plants to laboratory...

Read More »
Eraser Co. to Display Products at the MD&M West Expo: Booth #1745
Tube / Pipe / Hose Cutters and Cutting Machinery

Eraser Co. to Display Products at the MD&M West Expo: Booth #1745

(Syracuse, NY): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2011 Medical Device Manufacturing West Expo (MD&M West) from February 8th through the 10th in Anaheim, CA. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their world-class medical...

Read More »
Pneumatic Saws have multiple safety features.
Tube / Pipe / Hose Cutters and Cutting Machinery

Pneumatic Saws have multiple safety features.

Saw It® models SAWITSD and SAWITD feature immediate shutdown when throttle is released and immediate start upon throttle squeeze. On SAWITSD, trigger lock prevents accidental activation if trigger is unintentionally bumped/pressed. These tools can cut plastic, steel, and stainless steel, with 6 in. min clearance beyond pipe to accommodate blade movement. Products cut up to 20 in. dia pipe...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics