Tube / Pipe / Hose Cutters and Cutting Machinery

End Prep Tool prevents out-of-round bevels.
Tube / Pipe / Hose Cutters and Cutting Machinery

End Prep Tool prevents out-of-round bevels.

Portable, air-powered MILLHOG® Dictator Clamping Tool features centering cage, mounting sleeve for tool, and dial indicator for establishing actual center of pipe up to 24 in. OD. Capable of compound bevels without adjustments, preset template allows ratchet cross-feed mechanism to engage single point cutting blade. Tool uses cutter blades made from TiN coated, high-speed tool steel and...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Rotary Pipe Cutter generates minimal heat.

Model SA-90 cuts tubes and pipe with max OD of 3.55 in. and max wall of 1.18 in. Holding collets virtually eliminate distortion, even on thin walled tubing. Cutter provides fully automatic operation, including loading, auto trim cut, production cutting, and unloading. Cutter head revolves around circumference of pipe or tube while cutters close toward center. Model SA-90 is suited for steel,...

Read More »
Portable Machine cuts large-diameter pipes.
Tube / Pipe / Hose Cutters and Cutting Machinery

Portable Machine cuts large-diameter pipes.

PipeMaster, for cutting 6-48 in. CI, DI, and steel pipes includes cutting head with internal gears, which operate driving wheels and spin shaft. Cutting blades are enclosed for safety with diamond plated edge or tungsten carbide tips. Cutting head is held on to pipe by wide roller chain tensioned with threaded take-up mechanism. Unit has hydraulic motor which drives gear system requiring external...

Read More »
Cosmetic Tubing Systems offer high-speed peripheral cutting.
Tube / Pipe / Hose Cutters and Cutting Machinery

Cosmetic Tubing Systems offer high-speed peripheral cutting.

Mono- and Multi-Layer Tubing Systems offer 60 mm sleeve diameter capacity. Cutter slices tube by making small nick around circumference of sleeve at 1,500 rpm. Finished cut face is exactly 90° square because cutting head moves during extrusion cut cycle at rate of 120 cuts/min. Typical tube line includes 60 mm extruder, two 32 mm extruders, multi-layer die head and tooling, dual vacuum,...

Read More »
Pipe Cutter is computer controlled.
Tube / Pipe / Hose Cutters and Cutting Machinery

Pipe Cutter is computer controlled.

Model CL-124 cuts complex pipe-ends, multiple holes, and contoured pipe-fittings using plasma or oxy-fuel. Heavy-duty industrial computer runs under extreme temperature, humidity, and vibration with no PCI cards. System, programmable via LCD computer menu, allows user to set up holes, slots, rectangles, and custom cuts. Flash memory card stores thousands of patterns that can be recalled later for...

Read More »
Tool Bits perform specific welding end prep jobs.
Tube / Pipe / Hose Cutters and Cutting Machinery

Tool Bits perform specific welding end prep jobs.

Titanium nitride (TiN) coated Formed Tool Bits, for use with EscoLock(TM) wedge-lock blade locking system, bevel, face, and bore clad boiler tubes simultaneously without cutting oils. Suitable for Millhog end prep tools, bits work on tubes from Â-½ in. ID to 18 in. OD and cut angles from 10° to 37½Â°. In addition to peeling back clad boiler tubes, bits perform specific...

Read More »
Automatic Cutter cuts wide range of materials.
Tube / Pipe / Hose Cutters and Cutting Machinery

Automatic Cutter cuts wide range of materials.

MMC100 cuts round or flat material up to 3.94 in. wide and .63 in. thick. It is microprocessor-controlled and can be programmed to cut any length with 1% or better tolerance. Programmable for up to 10 batches and 3 fixed feed rates, MMC100 is rated to cut up to 7,200, four in. pieces/hr. With max cutting force of 600 lbs, it can cut copper wire and cable, silver solder, power cords, cellophane,...

Read More »
Air Powered Saw cuts round pipe square.
Tube / Pipe / Hose Cutters and Cutting Machinery

Air Powered Saw cuts round pipe square.

APS-438 3 hp saw and WrapTrack clamps around circumference to cut pipe from 6 to 60 in. dia with ±1/8 in. accuracy and no heat affected zone (HAZ). It can cut 10 in. Sch. 160 pipe in under 10 min. Saw is available with 8 to 14 in. fiberglass reinforced abrasive blades and carbide tipped blades for cutting everything from plastic to cement lined ash pipe. Saw requires 90 psi @ 80 cfm, and...

Read More »
Cutoff Machine processes tube and bar stock.
Tube / Pipe / Hose Cutters and Cutting Machinery

Cutoff Machine processes tube and bar stock.

Adige CM 502 cutoff saw and end-finishing center automatically loads stock, saws it to length, and machines both ends of cut component. Finished parts can be produced on single machine to minimize handling and cycle time. It can also perform rotary transfer, facing, chamfering, centering, recessing, drilling, turning, threading, measuring, and washing. It also offers electronic gauging and...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics