Tooling Fixtures

Portable Pipe Stand can be carried to where cutting is needed.
Tooling Fixtures

Portable Pipe Stand can be carried to where cutting is needed.

Equipped withÂ- chain vise, PipeBench 170 firmly holds 0.6–6.7 in. dia pipe and provides proper support during such cutting operations as creatingÂ- thread or welding. Maximum load capacityÂ- is 441 lb, and standard features include worktable andÂ- chip tray to catch sawing or threading chips. Weighing 22.5 lb, stand also comes withÂ- shoulder bag to facilitate portability.

Read More »
Fixturing for Welding - Electronic Enclosures
Tooling Fixtures

Fixturing for Welding - Electronic Enclosures

Sometimes a fixture does not need a table for its base. U-Form Spacer Blocks are assembled into a rectangular structure. Changeover for different sized parts is elegant, yet simple. Open access to the middle makes loading the loose pieces easier. The U-Form Spacer Block on the near side can be accurately shifted in or out depending on the part's width. Fixture Highlights Nearside U-Form Spacer...

Read More »
Workholding Chuck precisely grips helical gears.
Tooling Fixtures

Workholding Chuck precisely grips helical gears.

Designed to grip OD of 9 in. diameter helical gears, MG Mini-Gear Pitch Line Chuck features pins mounted in loose fitting housing so that they can float. Pins pick up pitch diameter, and jaws grip OD of pins. At 10 in. dia, Northfield model 1000 air chuck features 2 pin cages: one for left hand helix, and one for right hand helix. Pin cages are changed out by removing 3 mounting screws.

Read More »
Hydraulic Workholding Fixture features dual-purpose design.
Tooling Fixtures

Hydraulic Workholding Fixture features dual-purpose design.

Suitable for primary, secondary, and tertiary clamping, Model H-PRP first snaps work piece into position and then, once hydraulics are actuated, clamps part for machining. Hydraulically actuated position and retention pin provides clamping force of 500 or 1,000 lb at 5,000 psi. Low-profile design enables machining from multiple sides, while eccentric body and adjustable head accommodate casting...

Read More »
Diaphragm Chuck is developed for indicator manufacturers.
Tooling Fixtures

Diaphragm Chuck is developed for indicator manufacturers.

Designed for manufacturers of electronic and mechanical indicators, Model DPH-600 is 6 in., 10,000 rpm, totally sealed, TIR diaphragm chuck with special jaws, stop, and changeable fixtures. It enhances and increases production of machining 2 bores that guide indicator rod. Once side is machined, fixture is turned over, and second side is machined; alignment of 1/10,000 TIR is achieved bore to...

Read More »
Fixture System is suited for 3D coordinate metrology.
Tooling Fixtures

Fixture System is suited for 3D coordinate metrology.

Featuring fabricated T-slot fixture plate and integrated component kit, CMM T-Slot Fixture System offers infinite positioning of locating components, simplifying fixture construction. Combined with a laser engraved reference system for documenting fixture setup to maximize repeatability, T-slots are alpha-identified with engraved reference scales in English or Metric versions. System can be...

Read More »
Tooling Fixtures

Development Kit provides complete workholding solution.

Unilock Starter Kit lets users plug components immediately into their production cell, eliminating setup time and promoting productivity. Offered as complete workholding solution, kit includes clamping chucks mounted to universal adapter plates; universal pallets that facilitate attach/detach of positioning; and clamping components used to hold that which needs to be exchanged in and out of...

Read More »
RAYCO Broadens Distributor Network and Introduces a New Round of Innovations
Tooling Fixtures

RAYCO Broadens Distributor Network and Introduces a New Round of Innovations

Rayco Manufacturing, Inc. of Sterling Heights, Michigan introduces an increased distributor network and new configuring options for advanced vision/contact CMM fixturing. A typical Rayco fixture can be developed in minutes, instead of the weeks or even months required to manufacture a dedicated holding fixture. If the part design is modified over time, the fixture can easily be modified to match...

Read More »
Tooling Fixtures

Pallet System enables minimum workpiece resetting.

Unilock Quick Change Pallet System provides repeatable workholding fixtures set-ups for production run machining and grinding operations. Unit consists of stationary modules directly installed on machine worktables and tombstones. Modules are mountable on horizontal, angled, and vertical plates. System features 0.005 mm repeatability, high clamping forces of up to 25,000 lb-ft and 0.2 sec...

Read More »
Tooling Fixtures

Modular CMM Fixturing

EASTEC Exhibitor Product Release - 3/23/2007 Modular CMM Fixturing TE-CO now offers a complete line of modular CMM fixturing in Â-¼-20 for holding parts during inspection. Within this system, we offer fixture plates, fixture towers, a wide selection of standoffs and pin rest pads, magnetic rest pads, and soft touch clamps. Our hard coat, black anodized aluminum CMM fixture plates have...

Read More »

All Topics