Tool Adapters

BIG Kaiser Showcases the Newest in Tooling Solutions at South-Tec Booth #13066
Tool Adapters

BIG Kaiser Showcases the Newest in Tooling Solutions at South-Tec Booth #13066

Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at the 2009 South-Tec show. Visit BIG Kaiser at booth #13066 to talk with a member of our team and learn what's new from BIG Daishowa, Kaiser, Speroni, Unilock and more. Kaiser's new CKN modular connection is the strongest tool connection for light weight tools. CKN utilizes a high clamping...

Read More »
BIG Kaiser Introduces Extended Gauge Lengths for BIG-PLUS® Shell Mill Adapters and Shrink Fit Holders
Tool Adapters

BIG Kaiser Introduces Extended Gauge Lengths for BIG-PLUS® Shell Mill Adapters and Shrink Fit Holders

Elk Grove Village, IL - BIG Kaiser announces further expansion to the BIG-PLUS® line of tool holders by introducing extended gauge lengths for BIG-PLUS® Shell Mill Adapters and Shrink Fit Tool Holders. The development of the extended tool lengths was driven by customer demand and allow for a wider range of applications. BIG-PLUS® CAT50 Shell Mill Adapters are now available standard in...

Read More »
Adapters provide smaller pitch pads for larger pitch boards.
Tool Adapters

Adapters provide smaller pitch pads for larger pitch boards.

Facilitating high density interconnect (HDI) construction, BGA Switch-A-Pitch Adapters allow tighter pitch devices to be placed on existing larger pitch designs. Series includes models with tops where BGA landing pads are on 0.40 mm pitch and adapter bottoms are populated with BGA balls on 1.27 mm pitch. Measuring 0.062 in. thick, design eliminates need for laser-drilled microvias on...

Read More »
Tool Adapters

Bump Adapters connect 0.4 mm ICs to 0.5 mm pitch PCBs.

Offering standard pin 1-to-pin 1 routing connection scheme, which can be customized to accommodate any connection requirement, Fine Pitch Bump Adapters enable use of any SMT IC device on pitch of 0.4 mm or higher to 0.5 mm pitch PCBs designed for TSSOP and QFP packages. Adapter boards are fabricated from 0.032 in. thick FR4 or Rogers 370 HR, with Â-½ oz copper traces on both sides. Operating...

Read More »
BGA SMT Adapters are available in many different pin counts.
Tool Adapters

BGA SMT Adapters are available in many different pin counts.

Giga-snaP(TM) BGA SMT adapter pair consists of SF-BGA316C-B-62F female sockets with machined pins epoxy over-molded into assembly that matches male pin LS-BGA316C-61. Soldered to PCB using standard soldering methods without warping, SF-BGA316C-B-62F allows 0.8 mm pitch, 17 x 17 mm body, 20 x 20 array Analog Device ADSP-BF539/ADSP-BF539F ICs to be socketed and operate in demanding automotive...

Read More »
Bar Seals and Adapter Plates suit collet chuck applications.
Tool Adapters

Bar Seals and Adapter Plates suit collet chuck applications.

With Adapter Plates, users can mount collet chucks and 3-jaw chucks to wide range of spindles. Larger chuck can be mounted on smaller spindle for increased capacity, or smaller chuck can be mounted on larger spindle for increased tool clearance and speed. For applications that produce fines and dust, Bar Seal Assembly can be fitted to Royal S-type collect chucks.

Read More »
Tool Adapters

Adapters connect small pitch devices to large pitch boards.

Offered in panelized form, as adapter only, or with mounted devices, Switch-A-Pitch Adapters have tops where BGA landing pads are on 0.5 mm, and bottoms with BGA balls on 1.27 mm pitch. Units are 0.062 in. thick FR4 or Rogers 370 HR, with Â-½ oz copper traces on both sides. Non-solder mask defined pads are finished with electroless nickel immersion gold and have solder spheres of 63/37...

Read More »
Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.
Tool Adapters

Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.

Delivering 12 Vdc output, PSA12A-120-R and PSA12E-120-R 12 W wall-mount adapters are designed for use in USA and Europe respectively. They are double insulated, Class B EMI compliant, and have no-load power consumption of less than 0.3 W. Protected against over-voltage and short-circuit, products can operate in temperature range of 0-40°C and can tolerate up to 90% humidity. Applications...

Read More »
New Thinbit® Adapters
Tool Adapters

New Thinbit® Adapters

THINBIT®, manufactured by Kaiser Tool Company, announces an expansion to its selection of adapters for the MINI-BORE®, MICROBIT® and MiniGROOVE 'N TURN® lines of tooling. The new adapters are available with 3/4 and 1" outside diameters and 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" inner diameters. These tools, along with the entire THINBIT® line of cutting tools, will...

Read More »
Tool Adapters

Wright Tool Expands Line with New Impact Socket Sizes, Adaptors, and Rounds Out Family of Punches, Bars, and Chisels

BARBERTON, OHIO - October 2008 - Wright Tool has expanded its product line with 73 new items including impact sockets, adaptors, punches, bars and chisels. Both standard and deep 3/4-inch drive impact sockets are now available with up to 3-inch openings. Standard and deep 1-inch drive impact sockets are available with up to 4-1/2-inch openings. Standard 1-1/2-inch drive impact sockets are...

Read More »

All Topics