Tool Adapters

12x Power from the Cable to the Board - Han® Q 12/0 PCB Adapter
Tool Adapters

12x Power from the Cable to the Board - Han® Q 12/0 PCB Adapter

Thanks to the Han® Q 12/0 PCB Adapter, the HARTING connector in the small Han® 3 A series with the highest number of pins now has the option of direct connection to device boards. In addition to the actual PCB adapter, special versions of the Han® Q 12/0 connector's male and female inserts for the PCB Adapter will be available. The PCB Adapter's installation is independent of the...

Read More »
Tool Adapters

Bump Adapters allow SMT adaptation of fine pitch devices.

Mounted to existing PCB via raised pads up to 0.010 in. on adapter bottom, Fine Pitch Bump Adapters feature pads on component side, designed to accept any device on any pitch 0.5 mm or greater, and route signals for packages including TSSOP, QFP, and other fine-pitch devices down to 0.40 mm. Boards are 0.032 in. thick FR4 or Rogers 370 HR with Â-½ oz copper traces on both sizes. Non-solder...

Read More »
BGA Package Converter speeds system board development.
Tool Adapters

BGA Package Converter speeds system board development.

Model PC-BGA256B/BGA256E-B-01 is designed to receive 23 x 23 mm BGA, 16 x 16 array, 1.27 mm pitch on top and converts 1:1 pin mapping to 17 x 17 mm BGA, 16 x 16 array, 1 mm pitch on bottom, allowing new development system board to be tested with previous version of BGA device. Convertor can also be reversed by removing solder balls from 1 mm pitch side and adding them on 1.27 mm pitch side, and...

Read More »
Board-to-Board Socket Adapter suits 352-pin, 1 mm pitch BGA.
Tool Adapters

Board-to-Board Socket Adapter suits 352-pin, 1 mm pitch BGA.

Board-to-board socket adapter consists of SF-BGA352B-B-42 female socket module, which can be soldered to motherboard using standard soldering methods without warping, and SF-BGA352B-B-41 male pin module that solders to upgraded daughter board. Both modules are constructed with high-temperature FR-4 substrate and come with lead or lead-free solder ball types. Physical length from top connection...

Read More »
BGA Adapters link devices/boards with different pitches.
Tool Adapters

BGA Adapters link devices/boards with different pitches.

BGA Switch-A-Pitch adapters connect 0.40 mm pitch devices to boards with 1.00 mm pitch. Adapters have tops with BGA landing pads on 0.40 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch, with open space around adapter tops to allow for additional components. Operating in temperatures up to 221°F for FR4 and up to 266°F for lead-free, units allow for different termination...

Read More »
Bump Adapters fit any BGA device on 0.40 mm pitch board.
Tool Adapters

Bump Adapters fit any BGA device on 0.40 mm pitch board.

Fine Pitch Bump Adapters allow use of higher pitch devices on boards with pitches down to 0.40 mm. While tops have landing pads that can be designed to accept any device on any pitch and settle into fine pitch footprints, bottom has raised connection pads up to 0.010 in. that facilitate mounting of adapter to target board. Adapters, which can operate up to 221°F (FR4) and 266°F...

Read More »
BGA Socket Adapter accepts Samsung MCP memory device.
Tool Adapters

BGA Socket Adapter accepts Samsung MCP memory device.

Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures...

Read More »
Tool Adapters

BGA Adapters connect 0.50 mm devices to 1.00 mm boards.

Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free,...

Read More »
Chip Size BGA Adapter suits automotive applications.
Tool Adapters

Chip Size BGA Adapter suits automotive applications.

Constructed with Torlon 5530 material, SFS-BGA104A-52 allows 0.5 mm pitch, 8 x 8 mm body, and 15 x 15 array BGA devices to be socketed and operate without compromising performance. Giga-snaP(TM) BGA SMT adapter pair consists of SFS-BGA104A-52 female sockets with machined pins and sleeve spring that matches male pin LSS-BGA104A-51. Required force per pin of 40 g facilitates plugging/removal, and...

Read More »
Adapter allows prototyping of BGA ICs.
Tool Adapters

Adapter allows prototyping of BGA ICs.

Constructed with gold plated solder-tail machined pins, PA-BGA117C-P-S-01 prototyping adapter interfaces 117 position 0.075 in. pitch BGA SMT land pattern to 0.100 in. center pin grid array. Clam-shell spring pin ZIF socket, SS-BGA117C-01 can be used with adapter for access to address and data lines. Socket operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss, and can handle...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics