A/V Component Switch has programmable architecture.
Analog video front-end processor, TB1311AFG, accepts all standard analog audio and video signals required for HD TVs, set-top boxes, and other A/V products. Its programmable audio (L/R) block accepts up to 10 inputs and 3 outputs, while programmable video block accepts composite, S-video, component, RGB, and SCART signals and outputs up to 2 video signals plus monitor. Features include automatic...
Read More »
Current Relay Switches record on/off status signal.
In combination with State Data Loggers, non-contact, current relay switches captures and records on/off transition data with time and date stamp. Built-in relay switch provides ON status signal when power is present, and deactivates to provide OFF status signal when power is absent. Recorded data discloses how long and when device has been powered on or off. Applications include detection of...
Read More »
Rocker Switch targets HVAC applications.
Rated for up to 21 A at 125-250 Vac, normally open Half-Rocker Switch is packaged in nylon 6/6 UL 94V-2 housing that incorporates .250 in. quick connect tabs for connection to system wiring. Switch mechanism is rated for 6,000 cycles and features silver-tin contacts. Actuation force is 425 g with .345 in. actuator travel range. RoHS-compliant tamper switch is intended for use in furnaces, air...
Read More »Fujitsu to Feature Low-Power, High-Speed 10Gbps Ethernet Prototype Board at Server Blade Summit 2006
Company to Deliver Tutorial on 10Gbps Ethernet Data Fabric for ATCA Applications on April 20 SERVER BLADE SUMMIT 2006, GARDEN CITY, Calif., April 11 -- Fujitsu Microelectronics America, Inc. (FMA) will make a presentation on the PICMG-defined, ATCA standard design practice, and feature its 10-Gigabit Ethernet prototype board at the Server Blade Summit 2006 in Garden City, California (Hyatt...
Read More »
Does an IT MSP Really Add Value to a Manufacturing Environment?
To find out more about how IT managed service providers can specifically help your manufacturing company, download now.
Read More »
Tactile Switch has electrical life of 100,000 cycles.
Using silver-plated SS contacts and brass terminals, CS1211 Series right-angle, momentary, surface mount, tactile switch features electrical ratings of 50 mA @ 48 Vdc. With profile of 1.8 mm, switch measures 4.5 x 3.7 mm. Actuator and housing are composed of 4/6 Nylon with grounded SS cover for EMC protection. Actuation force on CS1211 is 180 gF, while operating temperature ranges from -40 to...
Read More »SAS Switch helps build high-performance storage networks.
Featuring nine x4 SAS ports, Serial Attached SCSI (SAS) switch enables SAS-based servers to connect to multiple SAS storage arrays. Size of SAS fabric can be increased by connecting multiple switches, and multiple storage domains can be configured via zoning support. Using copper cables, switch supports connection distances up to 8 m and provides complete SAS switch management through embedded...
Read More »
Stainless-Steel Coded-Magnet Safety Switches Survive Washdowns
April 10, 2006 Tarrytown, New York, April 10, 2006 ... SCHMERSAL is pleased to announce the expansion of their family of sealed, coded-magnet interlock switches to include stainless-steel models. Each features a multiple reed switch array that can only operate in the presence of the properly matched magnetic field. Available with 1 NO and 2 NC contacts, and an optional LED status indicator, the...
Read More »
Analog Switch ICs feature quiescent current of 10 -µA.
Operating up to 200 V, 8-channel Models HV2201 and HV2301 provide 22 ohm switch resistance, serial shift register control, and latch-up protection. Devices combine high-voltage bilateral DMOS switches with low-power CMOS logic to provide control of high-voltage analog signals. Available in 28-pin PLCC, 32-pin BCC, and 48-pin TQFP packages, RoHS compliant switches are suited for medical ultrasound...
Read More »Ethernet Switches feature stackable, single-chip design.
StrataXGSÃ-® III 800 Series 10 GbE Switches feature multi-layer switching with IPv4 and IPv6 routing capabilities. ContentAware(TM) engine provides 128 byte deep-packet inspection at wire speed. Offered in 12, 16, 18, and 20 port models, switches include CX4-compliant SerDes, hardware-based denial of service prevention, scalability through HiGig stacking technology, and non-blocking...
Read More »Ethernet Devices support frame relay migration to Ethernet.
EtherReach(TM) Series 2118 and 2210 enables carriers to migrate frame relay or ATM customers to native Ethernet service. By enabling fine-grained QoS, rate-limiting intelligence, and 128 VLANs per Ethernet port within EtherReach 2118 and 2210, carriers can offer differentiated services based on quality of service and bandwidth requirements. Each unit includes two 10/100BaseT subscriber...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
