Open Chassis Surge Protection Modules target OEM applications.
Available in 5, 8, 15, and 20 A- models, OEM surge protection modules can be specified in open frame and DIN rail mounts. Spectrum WVR-® wide voltage range technology senses and suppresses power line surges over voltage range of 85-175 V, while TSC-® total surge cancellation technology incorporates WVR and adds value by canceling residual surge for zero let-through energy. Modules inherently...
Read More »Tripp Lite Finalises Its Infrastructure Demonstrations for Data Centre WorldPower Management and IT
Visit Tripp Lite at the event stand J65 on February 27th and 28th CHICAGO, Feb. 12, 2013- - Tripp Lite, a world-leading manufacturer of power protection, connectivity, and Data Centre infrastructure products, is proud to announce that they will participate for the first time in Data Centre World, which will be held on February 27th and 28th 2013 at ExCeL in London. - Darwin Haines, Vice...
Read More »
TVS Diode Arrays replace multilayer varistors.
Housed in SOD-323 package that fits 0805 footprint, unidirectional SD05 and bidirectional SD05C protect electronic equipment from damage due to ESD and other transient events. Units offer dynamic resistance of 0.5 and 0.6 Ω, respectively, and can safely dissipate induced surge currents up to 30 A. Unlike ceramic devices, 450 W products are made of silicon diodes which have no inherent wear-out...
Read More »
Modular AC Surge Protectors shield mains power supplies.
Able to fit various mains configurations, M-LB Series- protects 115/230 V mains power supply lines against destructive power surges. Modular, pluggable, and pre-wired surge protection barriers feature front-sided indicators that deliver at-a-glance operating state and error message outputs for every protected line. Able to be mounted on DIN rails, KEMA-, UL-, and cUL-listed modules are...
Read More »
Considerations for Choosing a Plastic Injection Molder
Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.
Read More »
TVS Diode Array provides ESD protection for sensitive chipsets.
Optimized for protecting chipsets on high-speed data lines such as USB 3.0 and HDMI, SP3012-06UTG safely absorbs repetitive ESD strikes above maximum level specified in IEC61000-4-2 international standard (Level 4) without performance degradation. Dynamic resistance of just 0.4 Ω lowers clamping voltage for reliable chipset performance in field. Supplied in 3.5 x 1.35 x 0.5 mm -µDFN-14 package,...
Read More »
New 1000VDC Surge Protection Device
Mechanicsburg, Pa- Automation Systems Interconnect Inc is pleased to announce the release of a UL1449 3rd Edition Recognized 1000VDC Surge Protection Device. The DIN Rail mountable, pluggable module has a max discharge current (8/20) 50kA. The nominal discharge current (8/20) is 20kA. The SPD uses patent pending MOV technology with high energy thermal protection to provide reliable surge...
Read More »
Power Strip features built-in wireless monitoring.
PWM intelligent wireless power strip integrates Packet Power's wireless power and temperature monitoring technology, which provides remote view of power usage. Without any additional cords, it transmits data and offers wireless access to strip's amp, volt, frequency, volt-amp, watt, kWh, power factor, and temperature measurements. Wireless transfer of information to single collection point allows...
Read More »
Lightning Protection Products target remote radio head systems.
Part of Remote Radio Head Product Suite, IS Product Series protects mobile networks using distributed base station or RRH architectures against damage from lightning strikes, and provides fiber optic and cable management solutions for these networks. Strikesorb-® 30-V1-HV Surge Protective Devices are capable of withstanding multiple direct lightning strikes and operating safely in 48 Vdc...
Read More »Overvoltage Protectors use reverse bias blocking.
Designed to handle up to 3 A of continuous current, Models MAX14606/MAX14607 utilize reverse bias blocking to protect portable devices from damage caused by multiple power sources supplied simultaneously. Two integrated back-to-back FETs prevent voltage applied at intended output from feeding back into input. Housed in 1.3 x 1.3 mm WLP package, ICs protect systems against voltage faults up to +36...
Read More »
Type 1 Surge Protection for Electrical AC Mains and Branches: Zonemaster PRO and Zonesentinel
HOUSTON- MTL's new ZoneMaster PRO Type 1 and ZoneSentinel Type 1 models allows users to install UL1449 3rd Edition listed premium surge protection before or after the main building disconnect. These models, listed at 20kA in level, can be installed in a UL96A certified lighting protection system. The versatility and flexibility of the ZoneMaster PRO Type 1 makes it well-suited for all types of...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
