
Safeguard Valuable Data: Defend Critical Electronics
Rack Mount Data Line TVSS: PowerTrip(R) AAK Series Rack Mount Surge Protection Devices Canton, NC-October 21, 2008. Alltec Corporation introduces new Rack Mountable Transient Voltage Surge Suppression (TVSS) devices that are specifically designed for use in Networked Systems Equipment Applications such as 10/100/1000BASE-T Ethernet, RS232/RS422, Power over Ethernet(PoE), T1, Digital Data Services...
Read More »UPS Systems provide battery backup and surge protection.
RoHS compliant Back-UPS-® 350, 450, 550, 650, and 750 uninterruptible power supplies provide 200-450 W of power to back up variety of home computer system configurations depending on load. Models 450, 550, and 650 feature 8 outlets, while Models 750 and 350 offer 10 (master and controlled) and 6 outlets, respectively. Back-UPS ES 650 and 750 offer coax and telephone or Ethernet protection,...
Read More »Power Filter offers surge protection and noise filtering.
Designed to protect valuable electronics, such as plasma and LCD TVs from surges, spikes, and blackouts to optimize performance of connected equipment in pro installation, APC AV G5 Rack Power Filter features 8 surge-protected outlets, 6 for digital devices and 2 for high current, to aid in noise filtering through isolated noise filter banks. With Let-Through voltage rating of less than 40 V,...
Read More »
Bus Port Protection Array suits portable electronics.
Supplied in 1.6 x 1.6 x 0.75 mm, leadless LLP75 package, VBUS054CV-HS3 provides low capacitance (1.2 pF) with high surge current for protection against transient voltage signals over dual high-speed USB ports or up to 4 other high-frequency signal lines. RoHS- and WEEE-compliant solution provides transient protection for 4 data lines as per IEC 61000-4-2 (ESD) at 30 kV (air and contact discharge)...
Read More »
How EDM Controls Ensure Aerospace Validated Processes
Download this white paper to learn more about how wire EDM systems are used to validate aerospace manufacturing processes.
Read More »
Surge Protector meets UL 1449 3rd Edition safety standard.
Including Strikesorb-40 and Strikesorb-80 which are rated at 140 and 200 kA, respectively, Strikesorb SPD modules provide uninterrupted protection from surge currents regardless of power conditions. With flat slope resistance characteristic, units are designed to be installed in locations where risk of direct lightning strike is high such as oil, gas, and petrochemical equipment applications....
Read More »
Raycap's 40MM AND 80MM Strikesorb SPD Modules Receive UL 1449 3RD Edition Safety Standard Certification
Strikesorb modules designed to perform consistently across a wide range of transient current levels... LIBERTY LAKE, Wash. (August 7, 2008) - Raycap Inc. has received approval from Underwriters Laboratories (UL) to mark its Strikesorb 40mm and 80mm surge protection device (SPD) modules as UL 1449 3rd Edition Safety Standard certified. The Strikesorb modules met the UL 1449 3rd Edition Safety...
Read More »Silicon Protection Arrays guard high-speed data lines.
ESD overvoltage suppression devices of SP3000 Series use steering diode architecture with integral zener diode, fabricated with silicon avalanche technology, that protects each I/O line by routing surge currents to ground. Effective against ESD surges up to -
Read More »TVS Suppressor protects sensitive xDSL line drivers.
Along with clamping voltage performance minimized to protect sensitive ICs, TClamp(TM)1201S features 15 pF capacitance to help maintain signal integrity. This 12 V device protects against overvoltage caused by ESD, cable discharge events, and lightning. In addition to ADSL and VDSL applications, RoHS-compliant part can protect RS-232 serial ports. Use of 6-pin flow-through package lends to...
Read More »DC Front End Module comes in 2.28 x 2.2 x 0.5 in. package.
Providing EMI filtering and transient protection, M-FIAM9 28 V front-end module meets conducted emission/susceptibility per MIL-STD-461E and input transients per MIL-STD-704A/E/F and MIL-STD-1275A/B/D. With input voltage of 10-36 Vdc and output power up to 500 W, ruggedized unit can be mounted onboard or inboard for height-critical applications. It comes in 2 environmental grades, including -55...
Read More »
Multilayer Varistor is offered in sub 1 pF version.
Protecting high speed digital interfaces, RF antenna, and RF amplifier circuits against ESD events, sub 1 pF AntennaGuard delivers 0.8 pF capacitance at 10 and 15 V rating. Application specific, bi-directional transient voltage suppressor features fast response time to ESD and can withstand successive 1 k strikes at 8 kV (IEC 61000-4-2). Low-profile single-chip solution, in 0402 case size,...
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »