L-com Releases Cat6a Lightning and Surge Protectors for Communication Equipment Protection
Available in AL-CAT6AHPJW and HGLN-CAT6AJ models and suitable for 10/100/1000/10000 Ethernet applications. AL-CAT6AHPJW protectors are designed for outdoor use and features ultra-low capacitance semiconductors. HGLN-CAT6AJ devices are used in quad-speed indoor surge protection applications and use thyristor diode technology.
Read More »
New Surge Protection Devices Cover System Voltages from 120 to 600 Volts
Designed with industry leading, internally fused, thermally protected MOV technology. UL 1449 4th edition certified series feature parallel redundancy module architecture making them robust and reliable. Type 1 and type 2 power line surge protection devices are capable of handling impulse current up to 300 kA at 8/20 μs.
Read More »
New Portable Desktop Surge Protectors Come with Automatic Shutoff Feature
Available in TLP648USBC and TLP366CUBEUSBB models with long pivoting power cord. The TLP648USBC (U-shaped) is offered with spring-loaded clamp and six NEMA 5-15R outlets, two USB-A charging ports (4.8A shared) and a USB-C charging port (3A). The TLP366CUBEUSBB model features three-inch cube form factor with removable USB wall charger.
Read More »
New DTK-DF120S1 Surge Protector Designed to Minimize Damage from AC Supply Voltage Spikes
Provides notification via dry contacts, which alert central station monitoring that the module needs replacing. Sounds a loud audible alarm and an LED flashes when unit absorbs power surge and stops functioning. 120-volt circuit protection device is UL 1449 and UL 1283 listed.
Read More »
Guide to FDA Approval & Compliance
Manufacturers must comply with FDA rules and regulations to ensure public health.
Read More »
DITEK Introduces UPS, Network Protection and Surge Protection Devices at ISC West 2019
DTK-MRJPOEX outdoor surge protective device provides a 20kA/pair surge current rating and is suitable for use in UL 508A Listed panels. DTK-RMNETS series of modular network protection products provide 20kA/pair surge protection for up to 24 Ethernet and PoE circuits. DTK-UPS600 and DTK-UPS800 UPS series provide complete power protection against surges and spikes.
Read More »
New DTK-WM4NETS Surge Protector Supports Data Speeds up to 10 Gbe
4-channel, wall-mount surge protector provide surge protection for shielded Ethernet, PoE and optional PoE extender circuits. Provides surge protection grounding to remote devices when used with STP cabling. Ideal for smaller installations where Ethernet cabling feeds require protection before entering network switches.
Read More »
Southwire Presents Surge Guard RV Power Protection Devices That are UL and cUL Listed
Available in 44380 (30A), 44390 (50A), 34931(30A) and 34951(50A), 40301(wireless LCD display) models. Features elevated ground and load side open neutral protection. Offered with wireless communication capabilities that enables monitoring of the status of RV’s power remotely.
Read More »
DITEK Launches Surge Protectors Compatible with CAT5e, CAT6 and CAT6A Cabling Infrastructure
The compact design offers rapid-replacement surge protection modules with shielded RJ45 connections and is ideal for smaller installations. Available in two versions DTK-WM4NETS a 4-channel Ethernet and PoE surge protector and DTK-WM4EXTS a 4-channel PoE Extender surge protector. State-of-the-art technologies feature a hybrid design with both Silicon Avalanche Diode (SAD) and Gas Discharge Tube...
Read More »
Latest Isobar Surge Protectors Allow USB Mobile Device Charging
The new Isobar Surge Protectors come in IBAR4ULTRAUSBB and IBAR6ULTRAUSBB models with USB A charging ports. The devices are offered with four or six NEMA 5-15R outlets with isolated filter banks. The units feature metal housing with black finish and surge suppression rating of 3330 or 3840 J. They come with 8 or 10 ft input power cord with right-angle NEMA 5-15P plug and diagnostic LEDs...
Read More »
ProTek Offers Automotive Circuit Protection Devices with Lead-Free Pure-Tin Plating
The PAM1IVN27 and PAM2IVN24 Circuit Protection Devices are offered in molded JEDEC SOT-23 and JEDEC SOD-323 package. The devices are suitable for CANBus, LINBus, FlexRay, and SENT in-vehicle sub-systems and offer bi-directional configuration and a leakage current of 0.8 nA at 27°C. The units come on 8 mm tape and reel in minimum quantities of 3000. They feature solder reflow temperature of...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
