PEM® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation
Blind Studs

PEM® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation

PEM® FHL™ and FHLS™ self-clinching flush-head studs from PennEngineering® feature a unique low-displacement head design enabling close-to-edge installation of the fasteners in thin metal sheets. The studs provide ideal attachment solutions compared with weld studs and other conventional hardware by promoting easier and cleaner installation with fewer production steps and more reliable...

Read More »
PEM® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs
Fasteners

PEM® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs

PEM® concealed-head self-clinching studs and standoffs from PennEngineering® install permanently in thin metal assemblies to provide strong and reusable threads for mating hardware while preserving a smooth and unmarred appearance on the side of the sheet opposite installation. The concealed-head feature additionally will satisfy strict ingress protection requirements in assemblies where a...

Read More »
Wall Studs

ClarkDietrich Receives Los Angeles Research Report for its ProSTUD Drywall Framing System

West Chester, Ohio- – The City of Los Angeles Department of Building and Safety has certified, in report LA RR 26019, that ClarkDietrich’s ProSTUD® Drywall Framing System (ProSTUD® and ProTRAK®) are code compliant building products and are approved for use in construction in the City of Los Angeles. The LA RR requires exceedingly difficult third-party evaluation, against a very stringent...

Read More »
Flush-Head Studs offer quick mating with plastic fasteners.
Blind Studs

Flush-Head Studs offer quick mating with plastic fasteners.

Integrating X-Press™ threads, PEM Type FHX™ Studs enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies. Self-clinching units install permanently in metal sheets as thin as 1 mm and press into place using any standard press. Available with 5 mm and 6 mm threads in lengths from 10–25 mm, studs are- made from hardened carbon...

Read More »
Uniquely Designed Variations of PEM
Blind Studs

Uniquely Designed Variations of PEM

Uniquely designed variations of PEM® self-clinching nuts, studs, and standoffs from PennEngineering® allow for close-to-edge placement in thin metal assemblies without compromising host sheet or fastener.-  Their engineering effectively reduces the standard minimum distance for hole-centerline-to-edge" required for successful clinching to provide ideal solutions where space for fasteners is...

Read More »
Blind Studs

Self-Clinching Nuts and Studs work with hard sheet materials.

PEM® self-clinching nuts and studs, which include SH™ hard panel nuts and HFLH™ hard panel studs, are designed for permanent installation into hard sheet materials and- suit automotive component attachment applications. Manufactured from hardened alloy steel, products enable close-to-edge mounting without risking panel buckling, eliminate need for embossing operations, and can be...

Read More »
Heavy-Duty Studs clinch permanently into thin metal sheets.
Blind Studs

Heavy-Duty Studs clinch permanently into thin metal sheets.

Available in lengths up to 2 in., PEM® Type THFE™ Studs feature enlarged head diameter that distributes axial tightening force over wide area to minimize compressive stress on host panel, optimize pull through performance, and develop full thread strength. Self-clinching studs install into steel or aluminum sheets as thin as .031 in.- with hardness of HRB 85 or less on Rockwell B scale and HB...

Read More »
Wall Studs

Code Compliance Research Report from Architectural Testing Confirms ClarkDietrich's ProSTUD

West Chester, Ohio- – ClarkDietrich™ Building Systems is pleased to announce that it has received a Code Compliance Research Report (CCRR) from Architectural Testing, Inc. (ATI) for its ProSTUD® Drywall Framing System (ProSTUD and ProTRAK®). The report, CCRR-0207, confirms the system's compliance with the 2012 International Building Code®, 2012 International Residential Code® and the...

Read More »
Self-Clinching Studs attach thin metal assemblies.
Blind Studs

Self-Clinching Studs attach thin metal assemblies.

Designed to install- permanently using standard press, PEM® Self-Clinching Threaded Studs include flush-head models for use in aluminum or stainless steel sheets as thin as .040 in. and stainless versions for corrosion resistance in even thinner stainless steel assemblies. Other types include low-displacement flush head studs for close-to-edge installation; non-flush studs for sheets as thin...

Read More »
Flawless 3-D Lights
Weld Studs

Flawless 3-D Lights

Ultrasonic welding convinces during the manufacturing of complex daytime running lights Daytime running lights have become mandatory by EU Standards as of recently and are a popular style element. Their complex 3-D shape represents a challenge for joining technology. The ultrasonic welding tool can be easily adapted to the design type by means of studs in various heights. Short cycle times and...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics