Solid State Relays

AC and DC Solid State Relays come in 12 x 29 mm plug-in package.
Solid State Relays

AC and DC Solid State Relays come in 12 x 29 mm plug-in package.

Available in SPST/NO configuration, LifePlus ED Series offers output ratings of 3 or 5 A rms at 24-280 Vac, or 5 A at 1-48 or 1-80 Vdc, all at 40°C ambient temperature. AC outputs incorporate Back-to-Back SCR technology, while DC outputs utilize high-efficiency FETs. Supplied in 12 x 29 mm plug-in package, relays fit standard DIN rail and PCB mountable sockets, allowing direct replacement...

Read More »
Solid-State, Terminal Block Relays provide electrical isolation.
Solid State Relays

Solid-State, Terminal Block Relays provide electrical isolation.

At 6 mm wide, TERMOPTO functions as terminal block for signal connection and relay to separate signals. Electrically isolated, wear-free semiconductor switches with suppressor circuits ensure dependable operation, and outputs up to 500 mA can be switched over lifetime. Available with screw clamp or push-in connection technology, relays come in choice of 60 versions with input voltages from 5-230...

Read More »
Panel Mount Solid State Relays offer AC and DC outputs.
Solid State Relays

Panel Mount Solid State Relays offer AC and DC outputs.

Supplied in 21 mm wide package, EL series includes models with output ratings to 20 Arms from 24-280 Vac or 10 Adc from 3-100 Vdc with optional external heat sink. Logic compatible control input versions, rated 5, 12, or 24 Vdc, are also available. Output termination is via 0.25 in. quick connect terminals, while input terminals are 0.187 in. quick connects. Featuring 4 kV all solid-state optical...

Read More »
Solid State Relays

Electronic Overload Relays feature solid state design.

Featuring both integral ground fault protection and communications capabilities in single device, C440 and XT Relays directly monitor motor current in each phase and identify conditions that can lead to motor failure. Customers can select motor protection features they need, with selectable trip class, ground fault detection, phase imbalance, and full load current adjustment. DeviceNet(TM),...

Read More »
Single-Pole Relays provide 16 A switching current.
Solid State Relays

Single-Pole Relays provide 16 A switching current.

Available with normally open or changeover contacts in AgNi or AgSnO materials, 400 mW RZ Relays come in standard 85°C ambient temperature models as well as 105°C versions with transparent covers. RoHS-compliant units fulfill glow wire test according to IEC60335-1. Relays are suited for broad range of electronic applications in areas such as energy management systems, household...

Read More »
Panel Mount AC SSR accepts 3-32 Vdc or 90-250 Vac inputs.
Solid State Relays

Panel Mount AC SSR accepts 3-32 Vdc or 90-250 Vac inputs.

Designed for general purpose/light duty use in heating, lighting, and motion control applications, CL series is rated at either 5 or 10 A output from 24-280 Vac, and includes LED input status indicator. It is offered in industry standard panel mount SSR package and is also available in either IP00 or IP20 touch safe screw terminal configurations. Featuring 4 kV all solid state optical isolation...

Read More »
Low Voltage Disconnect Switch suits 12, 24 V battery systems.
Solid State Relays

Low Voltage Disconnect Switch suits 12, 24 V battery systems.

Designed to disconnect 12 or 24 V battery systems from their loads when voltage falls below pre-set value, DC output LVD series requires no operator interface to interrupt or reconnect battery circuit. Series is offered in rugged encapsulated panel mount package with screw terminals, and features all solid state construction with low Rds on resistance FET outputs rated at 40, 60, 80, or 100 A...

Read More »
Dual SSR Relay switches up to 9 A at up to 40 Vdc or 38 Vac.
Solid State Relays

Dual SSR Relay switches up to 9 A at up to 40 Vdc or 38 Vac.

Containing 2 solid state relays, Model 3053 features max DC switching voltage of 40 Vdc, max AC switching voltage of 28 Vac, and max switching speed of 300 Hz at zero load. Opto-isolation between control inputs and outputs of SSR in form of GaAs LED paired with set of optically controlled MOSFETs provides protection from output to input. Relay is suited for controlling large loads and devices...

Read More »
Solid State Contactor Relays offer 3-phase AC output.
Solid State Relays

Solid State Contactor Relays offer 3-phase AC output.

Measuring 90 mm wide, UL approved three-phase CTR series of relays offer AC output ratings of 25 A per channel at 600 Vac, AC or DC input control, zero voltage or random turn on, and IP20 touch safe construction with integral heat sink. DIN rail mounted series is CE certified to Low Voltage Directive and complies with IEC CISPR 11 Class A emissions requirements, IEC61000-4-2 through -6, level 3,...

Read More »
Solid State Relays utilize pulse transformer technology.
Solid State Relays

Solid State Relays utilize pulse transformer technology.

Designed for difficult industrial applications that frequently include electrical drives, Delcon Series utilizes pulse transformer isolation and protective load circuitry to maximize life cycle, regardless of number of operations and switching frequencies. Available in range of input and output versions for both AC and DC voltages, units offer transient immunity and input-to-output isolation, all...

Read More »

All Topics