Solid State Relays

Solid State Relays

Intelligent Power Switch is designed to conserve energy.

Produced in PowerSSO24 package, VNI4140K quad high-side solid-state relay utilizes VIPower(TM) technology in order to minimize on-resistance. Solution integrates logic interface, drivers, and protection circuits on same chip as power stage. IN addition to per-channel diagnostic bits and double thermal protection, IC offers over-temperature, short-circuit, and over-current protection as well as...

Read More »
PXI Switch Matrix is offered in solid-state version.
Solid State Relays

PXI Switch Matrix is offered in solid-state version.

Available in 2-, 4, and 8-slot BRICs, 40-563 PXI switch matrix features solid-state switches that have continuous current rating of 0.25 A and can sustain inrush currents of 0.75 A for 100 ms. Switches ensure rise and fall times of typ 20 ms without contact bounce, and each switch has typical on resistance of 0.8 W, providing typ path resistance under 2.5 W between X axis connections. Model...

Read More »
Flexible Low-Cost Bridging of Circuits Expanded to Other Products
Solid State Relays

Flexible Low-Cost Bridging of Circuits Expanded to Other Products

Carlisle, PA - Automation Systems Interconnect Inc. (ASI) is pleased to announce that the low-cost push in jumper system has now been incorporated into the design of several other product lines. The PTC push-in jumpers which come in as few as two positions or as many as 50 positions was first designed to be used with a basic control wiring terminal block. Based on feedback from our customers, we...

Read More »
Solid State Relays

Solid State Relay has slim design.

Capable of switching up to 15 A dc and 10 A ac and built with heat sinking capability in 17.5 mm modular design, Magnecraft 861 eliminates need for heat dissipation calculations. RoHS-compliant unit features 100% solid state operation, integrated snubber, and isolated input and output circuits. Finger-safe terminals protect operators from live currents and accidental shocks. Suited for medical...

Read More »
UL Certifies SCCR for Crydom Solid State Relays!
Solid State Relays

UL Certifies SCCR for Crydom Solid State Relays!

Crydom becomes the first solid state relay manufacturer to get UL certification for 100kA Short Circuit Current Ratings SAN DIEGO, CA - October 25, 2007 - Crydom, an operation of Custom Sensors & Technologies (CST), announces the first solid state relays available on the market with UL approved short-circuit current ratings (SCCR). These relays facilitate industrial control panel builders'...

Read More »
Solid-State Relays tolerate harsh industrial environments.
Solid State Relays

Solid-State Relays tolerate harsh industrial environments.

RoHS-compliant GN3 series 3-phase and motor reversing solid-state relays are designed for thermal efficiency and noise immunity. Models are suited for various 3-phase motor and heating applications as well as applications switching multiple outputs with single control signal. Supplied in IP20 touch-safe housing, series complies with IEC 62314 (2006-05) and offers built-in transient protection....

Read More »
Solid State Relay features 800 µs turn-on/turn-off times.
Solid State Relays

Solid State Relay features 800 µs turn-on/turn-off times.

Rated for 2 Adc max load current and load voltage of 60 V, Model VO14642AT features 0.25 W on-resistance, permitting use of multiple relays in applications requiring low power consumption and heat dissipation. Optically isolated, 1 Form A device provides 5,300 V input-to-output isolation and bounce-free switching. Compatible with TTL/CMOS, relay is suited for variety of test and measurement and...

Read More »
Solid State Relays

Solid State Relay features specialized low-power design.

Model EDR82648 normally closed optically coupled solid state relay suits low-power applications. Features include blocking up to +/-100 Vdc or 70 Vac, load current capability up to 30 A/18 A, resistance of 0.09 W, control current of 0.9 mA at 2.9 Vdc, and 2 mW power is required to control 2 kW of output power. Unit comes standard in D2 packaging for PC Board mounting and can also can be...

Read More »
Solid State Relays eliminate acoustical noise.
Solid State Relays

Solid State Relays eliminate acoustical noise.

Available in standard in-line, mini in-line, or dual in-line packages, PCB mount Solid State Relays offer ratings from 1-25 A at line voltages up to 660 Vac. Versions are available with zero-crossing or random turn-on output. Insensitive to magnetic fields, RoHS-compliant relays are suited for pump control systems, vending machines, security systems, medical equipment, solenoid control, packaging...

Read More »
Solid State Relays

Miniature Relays suit sensing and multiplexing applications.

With input drive as low as 2 mA and switching speed less than 0.5 ms, ASSR-301C/302C and ASSR-401C/402C Solid State Relays provide off-state capacitance less than 15 pF and off-state leakage less than 10 nA. Units operate from -40 to +85°C with transient immunity greater than 1 kV/Â-µs. Models ASSR-301C and ASSR-401C are single-channel, 1 Form A relays that come in SO4 package, while...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics