Saw Blades

Automatic Saw is designed for high production rates.
Saw Blades

Automatic Saw is designed for high production rates.

Model CT 350 A-NC is fully automatic high-speed circular saw suitable for use on aluminum extrusions, small aluminum solids, and other nonferrous materials. Utilizing 14 in. carbide-tipped sawblade and spray mist coolant, it can yield 50 rms quality cuts at 90°, or 45° left and right, with accuracy of ±0.005 in. Saw features twin pneumatic vises with infinitely variable clamping...

Read More »
Diamond Hole Saws enable one-step cutting in hard surfaces.
Saw Blades

Diamond Hole Saws enable one-step cutting in hard surfaces.

Available in sizes ranging from 3/16 to 4 1/8 in., Quick Change Diamond Hole Saws feature AutoStart(TM) system, which allows user to accurately drill hole without first drilling small pilot hole in porcelain, granite, marble, ceramic tile, or glass. System consists of spring-loaded retractable shaft and conical carbide tip that creates tiny indent to ensure hole saw does not skate or walk.

Read More »
Saw Blade features 90 teeth and optimized angles.
Saw Blades

Saw Blade features 90 teeth and optimized angles.

Available in 10 and 12 in. diameters with 5/8 or 1 in. center holes, Signature Line Chop Master blade cuts any wood or composite material and has angled carbide points for minimized cutting pressure without bottom splintering, side scoring, or vibration. Unit features corrosion-resistant C-4 micrograin carbide saw blade tips, optimal perimeter concentricity, minimal noise, and side runout to...

Read More »
Band Saw Blades handle interrupted cuts in structural steel.
Saw Blades

Band Saw Blades handle interrupted cuts in structural steel.

Featuring triple-tempered M-42 cobalt high speed steel teeth, electron-beam welded to fatigue-resistant alloy steel backing strip, Versatix MP Blade design dissipates heat during cutting to minimize tooth breakage and maximize saw blade life. They come in range of sizes and thicknesses from Â-¾ x .035 to 2 5/8 x .063 in., and in selection of variable, positive-rake pitches from 2-3 to 6-10P....

Read More »
Dado Sets cut thin-width grooves.
Saw Blades

Dado Sets cut thin-width grooves.

Available in 2 different sets, Thin Kerf Dados cut grooves in thin plywood, MDF, or melamine boards. Two-piece set includes two 24-tooth outside saw blades and set of magnetic adjusting shims for 3/16 in. cuts, while 3-piece set includes outside saw blades plus 1/16 in. chipper with magnetic shims for creating cuts from 3/16 to Â-¼ in. Both work on table or radial arm saws with 5/8 in. bore....

Read More »
Diamond Grit Blades have 1 in. tall profile.
Saw Blades

Diamond Grit Blades have 1 in. tall profile.

Available in 9 in. for larger dia cutting and 6 in. for more control on smaller dia cutting, DIAMOND GRIT THE TORCH(TM) SAWZALL® BLADES cuts in abrasive materials like cast iron. Featuring diamond grit technology, unit can also cut fiberglass, grade five porcelain tile, brick, ceramics, masonry, and plaster.

Read More »
Saw Blades

Newell Rubbermaid's Lenox Brand Launches New Saw Blades that Deliver Faster Cutting, Lowest Cost Per Cut

New Blade Geometry Enables Longest Lasting Blades on the Market ATLANTA, May 12, 2009 /-- Newell Rubbermaid's (NYSE: NWL) Lenox(R) brand of premium industrial products including power tool accessories, hand tools, torches, solder and band saw blades, today announced the introduction of T2 Technology Reciprocating Saw Blades and Hacksaw Blades - the longest lasting blades on the market. The...

Read More »
Holemaking Saw is designed for recessed light applications.
Saw Blades

Holemaking Saw is designed for recessed light applications.

Capable of cutting up to 7/8 in. thick plywood, wood, acoustical tile, and ceiling tile materials, 5-3/8 in. recessed light saw is available with steel and carbide grit cutting teeth. Carbide grit blade can even cut stucco and plaster up to 7/8 in. thickness. Designed for use with Â-½ in. electric power drill, saw features replaceable blades and has strong back plate that provides rigidity...

Read More »
Saw Blades

Circular Saw features all ball bearing motor.

Featuring 51° bevel capacity, 15 Amp HD5687 Skilsaw is suited for making angled rough cuts while framing roof or creating clean corner joint on baseboard. Saw includes 20 A AC-DC switch, anti-snag lower guard, and rear view depth adjustment, as well as stamped steel foot plate, spindle lock, and 8 ft cord. It is supplied with 24-tooth carbide tipped construction blade.

Read More »
Saw Blades

DeWalt Creates Industry's First Impact Ready(TM) Accessories Specifically Designed for Impact Drivers

- Growing Popularity of Impact Drivers Creates User Demand for Durable Bits That Can Withstand High-Torque Drilling and Fastening Applications - March 2009 - DEWALT, a leading manufacturer of industrial power tools and accessories, is the first power tool manufacturer to introduce a new category of accessories to meet the growing demand for impact drivers. DEWALT estimates that North American...

Read More »

All Topics