Reciprocating Saw Adapters plug into brand name saws.
Suited for automotive bodywork applications, Flush-Cut Adapters for cutting, rasping, and sanding allow users to make cuts in hard-to-reach places. They also permit rasping and sanding from flush surface in tight spots, without bending blades or damaging materials. Tools, able to reach behind trim and framing members, are useful in projects from framing to finishing.
Read More »
Grit Hole Saw resists snags, heat, wear, and abrasion.
Grit Hole Saw features tungsten carbide cutting edges that are permanently bonded to alloy blade body, making it suited for cutting surfaces that are too hard, abrasive, or thin for standard bi-metal hole saw. Ranging in size from 3/4 to 6 7/8 in., saw is suited for cutting cast iron, composites, drywall, plaster, stucco, ceramics, fiberglass, and hardwood.
Read More »
Hacksaw offers blade change ability with pre-tensioning.
FatMaxÃ-® High Tension Hacksaw features adjustable thumb-dial tension mechanism that provides tension memory and one-piece design that permits tension settings up to 330 lb. Power load sliding tension mechanism increases leverage and provides greater control when releasing blade, while 24 tpi, bi-metal blade allows for flush cutting with 4.75 in. depth cutting capacity. Die-cast, slope-nosed...
Read More »
Metal Cutting Blades cut ferrous and non-ferrous metals.
Constructed with vibration dampening geometry, EnduranceÃ-® Carbide Tipped 8 in. Metal Cutting Circular Saw Blades resist bending and twisting and do not produce clouds of abrasive dust. They deliver straight cut with clean, burr-free edge with minimal heat and sparks. Blades with 42 teeth are recommended for metals over 3/32 in. thick, while 50-tooth blades are suited for thinner materials....
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »Gas Saw Blades are triple-reinforced.
Available with 20 mm and 1 in. arbor hole sizes, 14 in. metal and ductile gas saw blades measure 5/32 in. thick. Blades are constructed with 3 layers of fiberglass reinforcement for increased strength on the sides of the wheels. DSA approved blades are available in 2 grains: aluminum oxide, for metal/steel applications, and aluminum oxide-silicon carbide mix, for working with ductile iron.
Read More »
Bi-Metal Band Saw Blades have neutral rake tooth design.
Valu-Pac bi-metal band saw blades are offered in packages containing 3 blades with identical pitch, width, and length. They incorporate 8% matrix cobalt cutting edge for resistance to tooth chipping and neutral rake tooth design for additional tooth strength. Products are offered in 1 in. width with 4-6 or 5-8 pitch and 1Ã-¼ in. width with 3-4 or 4-6 pitch. Multi-pitch teeth reduce noise...
Read More »
Carbide-Tipped Saw Blade cuts case hardened materials.
HRc CarbideÃ-® band saw blade features 0Ã-
Read More »
Circular Saw Blade speeds cutting of steel and aluminum.
Morse Metal Devil(TM) is offered in sizes from 5 3/8-14 in. diameter to fit cordless and corded saws. Metallurgy of tungsten and titanium carbide cutting tips virtually eliminates sparks during cutting and minimizes transfer of heat to material being cut. Blades used for cutting steel and thin steel have 0-° rake, while blades for cutting softer aluminum, stainless steel, and wood have more...
Read More »
Bandsaw Blades cut through tough materials.
Heat-treated BlockBusterÃ-® M42 Blades feature fatigue-resistant backer. Variable-pitch tooth configurations include 1.1-1.4, 1.5-1.9, 2-3, 3-4, 4-6, and 5-8 teeth per inch. Widths range from 1 Ã-½ to 3 1/8 in. and thickness range from .050-.062 in. Blades can cut through variety of steel including carbon, chrome, tool, die, and stainless, as well as titanium and other alloys and are...
Read More »Bimetal Bandsaw Blade dismantles pallets.
Designed to cut deck boards from stringers, Kron bandsaw blade features shock-resistant Matrix tool steel teeth, beam-welded to heat-resistant spring steel back. Bimetal construction withstands cutting heat that quickly destroys temper of carbon steel blades. Blade also stands up to shock of interrupted cuts in pallets. Light tooth set minimizes wood loss. Blade is 1 1/4 in. wide, with 5/8 in....
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
