Reciprocating Saw Blades offer shatter resistance.
Suited for pneumatic power tools, Max Cut(TM) Air Saw Bi-Metal Blades measure Ã-½ x .025 x 3 5/8 in. with variety of tooth configurations including 18, 24, 32, and 10/14. They are designed with M42 edge for wear resistance and feature precision milled teeth for aggressive, yet straight and clean cuts. Blades are suited for auto body shops, boat builders, and manufacturers working in sheet...
Read More »Chop Saw Blade cuts thick metal stock.
With zirconia grain design, double-reinforced, angle iron chop saw blade cuts all ferrous metal applications such as iron/steel bar, metal decking and cable, pipe line, wall studs, high-tensile steel, stainless steel sheets, and stainless steel bars. Blade is 14 x 3/32 x 1 in. and can run at speeds up to 4,400 rpm.
Read More »Band Saw Blades feature AlTiN coated edge.
ARMOR Rx+ bi-metal band saw blades cut through structurals, tubing, and small rounds of mild carbon steels and tool steels with minimal vibration and noise. Coating process binds coating to blade, acting as defense mechanism against heat build-up. Tooth design eliminates tooth strippage and prevents premature failure, while backing steel withstands stresses of structural cutting applications.
Read More »Hole Saws offer cutting depth of 1 9/16 in.
Able to cut tough materials, Carbide Tipped Hole Saws are constructed with tungsten carbide tooth tips and precision ground teeth. They are available in 3 tooth-per-inch configuration and in various saw diameters ranging from 9/16-6 in. Hole saw kit composed of most popular specifications used by specific contractor trades is also available.
Read More »Industrial Applications for Infrared Heaters
This ebook discusses the various industrial applications for infrared heaters, including glass manufacturing, textiles, plastic & film, metals, and more.
Read More »Bandsaw Blades cut wide array of materials.
Designed for general-purpose machine shops, Easy-Cut blades employ tooth design that permits blade to operate over large selection of materials. They are suited for use with non-ferrous materials from plastics, aluminum, and copper to AISI range stainless steel and tool steel. Prehoned 3868 TSS (Triple Set Stainless) blades, usable with AISI range stainless steel, eliminate need to run blade in...
Read More »Jigsaw Blades fit both universal- and Bosch-shank saws.
Unified Shank(TM) series utilizes proprietary, break-resistant Bi-Metal Unique(TM) Saw Technology and eliminates need to have different blades for different jigsaws. Line includes 6 blades for cutting wood, 4 for cutting metal, and 6 multi-purpose blades. After initial use, teeth develop groove in center of backing material. As a result, cutting stroke produces dual chips that facilitate removal...
Read More »Band Saw Blades exhibit wear- and heat-resistance.
Offered in 7 widths and thickness from Ã-¾ x .035 in. to 3 1/8 x .063 in., Gladiator(TM) cutting blades feature bi-metal construction with fatigue-resistant alloy steel backing. Tooth design includes triple-tempered M42 steel teeth with 8% cobalt at up to 12Ã-
Read More »Band Saw Blades feature armor-like coating.
ARMOR CT Blades have heat- and wear-resistant carbide teeth that are applied using carbide weld process. ARMOR CT BLACK blades feature AlTiN coating making them suited for mid to upper grades of carbon steel solids; alloy, stainless, mold, and tool steels, as well as bundled, mild steel tubing. Sizes range from 1Ã-¼ x .042 to 3 x .063 in. ARMOR CT GOLD blades have TiN coating for medium- to...
Read More »Band Saw Blades handle highly abrasive cutting jobs.
Series HRc features micro-grained heat- and wear-resistant carbide teeth that are applied using carbide weld process, which helps prevent teeth from breaking off and becoming lodged in workpiece. Reinforced design provides resistance to tooth strippage and allows for penetration in difficult applications. Available in 1 x .035, 1Ã-¼ x .042, 1Ã-½ x .050, and 2 x .063 in., blades are suited...
Read More »Saw Blades retain sharp edges in construction applications.
Offered in 16 blade sizes and tooth variations, construction series circular-saw blades feature C3 Dyanite CarbideÃ-® teeth, anti-friction coating, and thin plate and kerf. They are hardened to Rc 40-44 to resist warping. Products include 7Ã-¼ in. dia fiber cement and metal cutting blades; 7Ã-¼ in. dia blades with universal arbor and diamond knockout; and 8Ã-¼, 10, and 12 in. dia...
Read More »More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »