Pressure-Reducing Regulator is made of stainless steel.
Pressure Regulators

Pressure-Reducing Regulator is made of stainless steel.

Miniature Series 9014 regulates inlet pressure of 0 to 3000 psi down to outlet pressures of 0 to 200 psi. Filtered inlet prevents contaminants from affecting positive seal when in lock-up condition. For precise control in low flow-rate applications, orifice sizes with Cv's of 0.01, 0.03, and 0.06 are available. Specially treated piston seal minimizes friction. Regulator includes NPT and tube-stub...

Read More »
Electrical Regulators

LDO Regulator serves low stand-by mode applications.

MIC5239 micropower low-dropout regulator provides keep-alive voltage for power-sensitive applications. It features low quiescent current of 23uA and input voltage range of 2.3 to 30 V. Regulator is stable with ceramic or tantalum output capacitor, and capable of providing up to 500 mA of operating current. Fixed output voltages include 5.0, 3.3, 2.5, and 1.8 V. Unit is offered in thermally...

Read More »
Temperature/Pressure Regulator has cascade control.
Miscellaneous Regulators

Temperature/Pressure Regulator has cascade control.

ET134 regulator eliminates temperature fluctuations by preventing pressure spikes caused by changes in process load. Sensors continuously reset pressure as temperature fluctuates. Vapor tension thermostat prevents ambient conditions from affecting control. Regulator has packless construction, hardened stainless steel trim, and few moving parts. It is available in sizes of 3/8 to 12 in. in cast...

Read More »
LDO Controller drives digital ICs.
Electrical Regulators

LDO Controller drives digital ICs.

MIC5159 low dropout regulator controller drives low-voltage DSPs, microcontrollers, and logic ICs. Available in IttyBitty(TM) SOT-23-6 package, it requires very little headroom to provide well-regulated supply of 1.5, 1.8, or 2.5 V. Device's headroom, or dropout voltage, is limited only by RDS(ON) of external MOSFET. It has fast transient response, good regulation over variation of line, load,...

Read More »
Pressure Regulator controls high purity, acid-forming gases.
Pressure Regulators

Pressure Regulator controls high purity, acid-forming gases.

Model 237 Series pressure regulator is suited for compressed gases such as hydrogen chloride and boron trifluoride. Its single-stage, aluminum silicon bronze diaphragm is mechanically linked to poppet to provide positive shutoff control. Stainless steel diaphragm is lined with Hastelloy® C-22 to protect gas purity. Delivery pressure ranges are 3 to 75 and 10 to 150 psig. Maximum inlet...

Read More »
Temperature Regulator suits heating/cooling applications.
Miscellaneous Regulators

Temperature Regulator suits heating/cooling applications.

Self-actuated Series 2000 Temperature Regulator offers one-piece, hardened stainless steel plug and shaft that resists plug erosion. Single or double-seated regulator is available as reverse or direct acting. Its two or three way bronze valves feature galvanized iron union ends, spring loaded Teflon® chevron type packing, and copper bulb with armored capillary. Regulator is available in...

Read More »
Pressure Regulators range from 1/2 to 3 in. in size.
Pressure Regulators

Pressure Regulators range from 1/2 to 3 in. in size.

Gas charged 1358 Series Servo-Dome pressure regulators suit high pressure (6000 psi) applications. Valves in Servo-Dome line are available in sizes with Cv ratings from 0.6 up to 116.0. All are made from stainless steel; diaphragm, seat, and seal materials can be varied. End connections include pipe, MS tube, and standard and clamp ring type flanges. Valve domes can be loaded through use of...

Read More »
Bypass Relief Valves feature Teflon® construction.
Relief Valves

Bypass Relief Valves feature Teflon® construction.

Series RVT angle pattern relief valves have Teflon® shaft and body for use with corrosive and ultra-pure liquids, and for elimination of sticking and surging. Pipe sizes range from 1/4 to 2 in. with various seal materials including Buna-N, Viton, and EPDM. Flow rates range from 2 gpm, and set pressures range from 5 to 150 psi. Valves relieve excess pressure in piping systems, as well as...

Read More »
Electrical Regulators

Buck Regulator is housed in 7-lead SPAK package.

MIC4685 PWM, 200 KHz buck regulator carries input voltage range of 4 to 34 V and has 3 A output current. Output voltage is adjustable down to 1.25 V. Junction-to-case thermal impedance of 2.2°C/W enables device to provide more than 3 A of continuous output current without heatsink. Features include typical 150 microamp shutdown current, cycle-by-cycle current limit, and frequency foldback...

Read More »
Pressure Regulators are hand operated.
Pressure Regulators

Pressure Regulators are hand operated.

Series 2350 includes valves made from brass and stainless steel, and has Cv offerings of 0.07 and 0.14. Regulators suit applications with inlet pressures to 10,000 psi and outlet pressure settings up to 6,000 psi. Inlet filter prevents seat contamination damage. Standard seat is Kel-F, which assures dead-tight shutoff under lock-up conditions. Series offers self-venting feature for inert gases....

Read More »

All Topics