New Regulators Products

Step-Down DC/DC Converter targets automotive applications.

Housed in 3 x 3 mm DFN or MSOP package, 2 A Model LT1912 features input voltage range of 3.6-36 V, making it suited for load dump and cold-crank conditions found in automotive applications. Device's 3.2 A internal switch delivers up to 2 A of continuous output current to voltages as low as .079 V. Operating from -40 to 125Ã-

Synchronous Buck Regulator promotes battery efficiency.

Contained in 3 x 3 mm MLFÃ-® package, MIC2238 2.5 MHz dual 800 mA synchronous buck step-down regulator features Trickle Mode(TM) enabling light load efficiency for Li-Ion battery powered systems. Device offers input voltage range from 2.5-5.5 V and ultra-low quiescent current of 28 Ã-µA at light loads. Operation modes include Variable frequency Trickle Mode(TM) operation for highest light...

Furon-® High-Temp UPRP -¼ Precision Regulator

Saint-Gobain Performance Plastics is pleased to announce its new line of High-Temperature UPRP Ã-¼ Precision Regulators. Designed for precise fluid pressure control in delivery of aggressive, pure chemicals and DI water, the HT UPRP features a dome loaded actuator that pneumatically maintains downstream pressure to a set level. Regulators feature a virgin PTFE/FluoroloyTÃ-® and PFA wetted...

Switching DC/DC Regulator operates from -55 to 125-

Suited for military and avionics applications, Ã-µModule(TM) LTM4600HVMPV is comprised entirely of silicon with built-in inductor. Synchronous unit operates from input supply range of 4.5-28 V and regulates output voltage from 0.6-5 V. Housed in 15 x 15 x 2.8 mm Military Plastic LGA package, device can deliver 10 A continuous load current and achieve efficiencies as high as 92%. Regulator is...

System Selection: Smart Hardware Choices Enable a Cascade of Value

This white paper outlines six questions to help OEMs and ISVs select the right hardware design to best support their purpose-driven application and product.

Gas Regulators minimize gas flow blockages.

Consisting of regulators, flowmeter regulators, and flow gauges, Series 30 features Sure-Seat(TM) technology with copper and nickel filter that prevents debris and ice from entering seat during operation. Diaphragms are constructed of laminated neoprene with reinforced nylon fiber. Instead of diaphragm burst disk, high-pressure regulators feature automatic reset relief valve. Flow gauges offer...

Low Dropout Regulator extends battery run-times.

Available in 3-pin SOT-223 package, 250 mA Model MCP1703 combines quiescent current of 2 Ã-µA with input voltage up to 16 V. It includes device- and circuit-protection capabilities such as over-current/over-voltage protection and thermal shutdown. Chip is suited for applications requiring long battery run-times and high tolerance for input-voltage variations, such as smoke detectors, fire...

Low Dropout Regulator has 0-40 V output voltage range.

Model LT3080 1.1 A 3-terminal LDO offers paralleling for heat spreading and adjustability with one single resistor. Features include multi-amp linear regulation in surface-mount systems without heat sinks, input voltage capability ranging from 1.2-40 V, full load low dropout voltage of 300 mV, and on-chip trimmed reference with an accuracy of Ã-

Low Drop Out Regulator powers RF systems.

Model SP6260 eliminates any need for reference bypass capacitors in applications requiring low output noise performance such as mobile phones. Features include noise output of 30 Ã-µVm, dropout voltage of 150 mV at 100 mA, shutdown current of 0.1 Ã-µA, quiescent current of 25 Ã-µA, 70 dB power supply rejection ratio, and -40 to +125Ã-

DC/DC Buck Controllers accept input voltage up to 30 V.

Housed in 2.9 x 2.8 mm TSOT6 package, Models SP6125, SP6126, and SP6127 feature frequencies of 300, 600, and 900 kHz, respectively. Step down controllers are appropriate for generating 5 or 3.3 V system bus, as well as providing 1.x V core voltage for devices such as Altera's CycloneÃ-® and Xilinx's Spartan(TM) FPGAs. Specified over -40 to +125Ã-

Regulator offers overvoltage protection during power surges.

Model LT4356 overvoltage protection regulator with overcurrent protection and inrush current limiting offers input operating range of 4-80 V. It can handle transient voltages of 100 V and provides reverse input protection to -30 V without damage to itself or load. Regulating output to user-defined voltage by controlling gate of external N-Channel MOSFET during overvoltage event, device includes...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!