New Regulators Products

ESAB Offers Lifetime Warranty on PUROX-® Torches and Regulators

January 2008 Florence, SC - ESAB Welding & Cutting Products announces that standard torches and regulators in its PUROX-® line of hand-held gas equipment will now have a Lifetime Warranty. The new warranty applies to all torches and regulators manufactured January 1, 2008, and after. All items manufactured before that date will still have a five-year warranty. PUROX torches are designed for...

Air Filter Regulator withstands salt water environments.

Built to resist corrosion, Type-300 Gulf Buster Filter Regulator features aluminum body, stainless steel trim and internals, as well as all-stainless steel external hardware. It provides constant control under variable flow rates and supply pressures, while aspirator design helps maintain set pressure at higher flow levels. Designed to provide instrument-quality air to range of pneumatic tools...

Step-Down DC/DC Converter includes linear controller.

Housed in 3 x 3 mm DFN-12 package, Model LT1939 operates from VIN range of 3-25 V, making it suited for regulating power from variety of sources, including protected automotive batteries, industrial supplies, and unregulated wall adapters. Unit's 2.3 A internal switch delivers up to 2 A continuous output current at voltages as low as 0.8 V. Switching frequency is user programmable and...

Step-Down DC/DC Converter is offered in 3 x 3 mm DFN package.

Model LT1913 3.5 A, 25 V step-down switching regulator operates within VIN range of 3.6 to 25 V. It features 4.6 A, 95 mW internal switch that can deliver up to 3.5 A of continuous output current at voltages as low as 0.79 V at up to 90% efficiency. Switching frequency is user programmable from 20 kHz to 2.4 MHz and converter features external synchronization from 250 kHz to 2 MHz. Unit operates...

Finding the Right Bore Configuration for your Application

There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!

Rise Time Accelerator promotes I2C/SMBus system reliability.

Available in 2 x 2mm DFN and SC70 packages, LTC4311 is designed for heavily loaded IÃ-²C/SMBus systems operating at bus speeds to 400 kHz. It uses boosted pull-up current of 5 mA during rising bus transitions while disabling current sources during falling transitions and logic lows/highs for improved low state noise margins. Operating from 1.6-5.5 V, IC features 5 Ã-µA shutdown and will...

LDO Controller is optimized for driving n-channel MOSFETs.

With adjustable and fixed 1.2 and 1.5 V output voltages, Model SiP21301 LDO controller uses external n-channel MOSFETs to provide drop-out voltages of less than 50 mV with 80% efficiency. Operating from 2.5-0.65 V, it delivers 1 to 7 A of current with 1% output voltage accuracy. Unit features programmable inrush current protection on start up, short-circuit protection, thermal shutdown,...

Pressure Regulators feature 2-stage design.

Equipped with 2Ã-¾ in. diameter stainless steel diaphragm, Ultra Low Delivery Pressure Regulators provide pressure control from 0.2-2 psig. Two-stage design delivers constant outlet pressure regardless of changes in cylinder pressures. Offered in chrome-plated brass or Type 316 SS, regulators are suited for low-pressure control of pure, inert, and mildly corrosive gases used with calibration...

Step-Down Regulators integrate low-on-resistance MOSFETs.

Operating from 3.3 or 2.5 V inputs, Models MAX8833/MAX8855 provide dual 3 or 5 A outputs and low on-resistances of 49 and 37 mW, respectively. Suited for DDR memories, processors that require more than one rail, and high-end enterprise equipments, units provide programmable frequency up to 2 MHz and external frequency-synchronization input. Available in 5 x 5 mm, 32-pin TQFN package, they are...

Voltage Controllers have battery-switchover functionality.

Designed to protect low-voltage systems up to 28 V, Models MAX4959/MAX4960 provide resistor-programmable overvoltage (6-28 V) and undervoltage (5-28 V) trip levels. They offer Ã-

Mott Corporation Displaying Porous Metal Solutions for Medical Industry

FARMINGTON, CT, January 2008 - Mott Corporation will bring a wide variety of porous metal components, assemblies and filters to their exhibit at the MD&M West tradeshow (Booth #3184) taking place in Anaheim, CA on January 29-31, 2008. Porous metal products used in filtration, flow control, and other customer specific medical applications offer exceptional performance, biocompatibility,...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.