New Regulators Products

Regulated Charge Pump has adjustable voltage output.

Manufactured in lead-free SO-8 package, NIS6201 provides regulated output voltage that can be referenced or added to any bus voltage, allowing unit to float bias or supply voltage on top of any bus voltage. It supplies 20 mA and 8-15 V and contains internal linear regulator and charge pump. High-voltage components are external to pump and can be sized accordingly, allowing thermally protected...

Switching Regulator ICs offer 4 levels of protection.

Manufactured in DIP-8 package, STR-A6251/51M/52 series is comprised of off-line PWM topology SMPS primary switchers with jittering function for reduction of EMI noise-filtering circuits. They offer frequency jittering for SMPS up to 20 W universal input, and external adjustment capability enables optimal jitter-frequency setting. Along with primary controlled CV/CC operation, auto-standby, and...

Step-Down Regulator targets consumer electronics.

With 50 V input range, High-Voltage Buck Regulator, Model A8499 is suited for applications where 12, 20, 26, and 28 V input voltages may occur. Internal blanking circuit is used to filter out transients due to reverse recovery of external clamp diode. Typical blanking time is 200 nS, and output voltage is adjustable from 1.2-24 V based on resistor divider and 1.2 V, 3% reference. Supplied in...

Voltage Regulator operates from -40 to +125-

Suited for industrial and automotive applications, I-grade 100 mA Model LT3020 VLDO(TM) offers input voltage capability down to 0.9 V and very low dropout voltage of 150 mV at full load. Output voltages include 1.2, 1.5, and 1.8 V fixed, and adjustable option ranging from 0.2-9.5 V. Housed in 3 x 3 mm DFN package, Model LT3020 offers micropower operation with 120 Ã-µA of quiescent current and...

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.

ICs deliver PC/server motherboard voltage regulation.

Providing voltage-regulator control for desktop computer and server CPU power management applications, L6713 and L6714 are compatible with 6-bit VID AMD and VR11 Intel specifications. Model L6714, 4-phase motherboard PWM controller incorporates embedded high-current MOSFET drivers, while L6713 facilitates migration between 4- and 3-phase topologies. Suited for current requirements over 130 A,...

Filters/Regulators/Lubricators feature modular design.

Intended for compressed air preparation, Series AS2 FRLs are made of smooth, lightweight polymer with metal connection threads. Individual parts can be exchanged while system is fully assembled. Oil is fed directly into system via hose from reservoir, protecting maintenance unit from becoming fouled by oil. Lubricator is surrounded by polyamide protective guard with large inspection window....

Linear Regulator powers analog and RF signal-path ICs.

Housed in 4-bump micro SMD package, miniature 100 mA low dropout Model LP5900A provides output voltages from 1.5 3.3 V with Ã-

Power Management Devices work in communication products.

Low-voltage power MOSFETs serve as switching devices with minimal current leakage to provide power management in high-frequency power supplies and motor control systems. Noise-clipping and ESD protection diodes protect high-speed system data from being degraded because of electromagnetic noise and chips from being damaged by static electricity. LDO voltage regulators maintain stable power supply...

Boost Regulator delivers more than 34 V and 90% efficiency.

DC/DC Boost Converter, Model MIC2296 allows for more than 1.2 A of switch current and can step up input voltages from 2.5-10 V to generate output voltage up to 34 V. It offers output over-voltage protection, less than 1% line and load regulation, and 1 Ã-µA shutdown current. Housed in 2 x 2 mm leadless package, chip is suited for driving OLEDs, TFT-LCD displays, and WLED camera flashes.

DC/DC Converter consumes 100 -µA quiescent current.

Step-down switching regulator Model LT3437 operates within VIN range of 3.3-60 V, making it suited for load dump or cold-crank conditions found in automotive applications. Rated at 500 mA, internal switch can deliver up to 400 mA of continuous output current at voltages as low as 1.25 V. Housed in 3 x 3 mm DFN package, unit features 200 kHz switching frequency, Burst Mode operation, external...

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.