New Regulators Products

Precision Voltage Reference comes in 2 x 2 mm DFN package.

Supplied in 3-lead package, LT6660 series combines 0.2% initial accuracy (max) and 20 ppm drift with 115 Ã-µA operation. It does not require output compensation capacitor and accepts input voltages up to 30 V. Able to withstand reverse-battery conditions, series offers output voltages of 2.5, 3, 3.3, 5, and 10 V. With dropout of 900 mV, products are also suited for precision regulator...

Synchronous Buck Regulator suits portable applications.

Supplied in 10-pin, 3 x 3 mm MLF(TM) package, 8 MHz MIC2285 merges LDO and buck regulator technology in sub 1 mm height IC. It incorporates LOWQ(TM) LDO mode for use under light load conditions and features internal power MOSFETs that supply up to 500 mA output current in PWM mode. In LDO mode, IC consumes 20 Ã-µA quiescent current and can also operate with max duty cycle of 100%. Product...

Step-Down Regulator offers I-grade temperature range.

Using constant frequency, current mode architecture, 4 MHz Model LTC3414 delivers up to 4 A of continuous output current at voltages as low as 0.8 V from thermally enhanced TSSOP-20 package. Synchronous buck regulator operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or multi-cell NiMH applications. Operating from -40 to +85Ã-

Linear Regulator features low dropout voltage of 45 mV.

With input voltage down to 1.7 V, 300 mA VLDO(TM) Model LTC3035 provides adjustable output voltage from 0.4-3.6 V. To allow operation at low input voltages, unit includes integrated charge pump converter that provides headroom for internal LDO circuitry. Output voltage accuracy of Ã-

The Ultimate Guide to Packaging Automation Solutions

This ebook provides an in-depth guide to packaging automation solutions.

Rack-Mount System offers multi-circuit switching protection.

In case of line or equipment failure, T-APS-R-15 chassis and T-APS-R card system provides automatic failover switching protection for sites with up to 15 complete, independent primary, and redundant T-1 or E-1 circuits. System, also manageable via SNMP, Telnet, or serial interface, enables switches can be used in several configurations. Each card operates independently, monitoring T-1 or E-1...

PWM Buck Regulator IC exhibits efficiencies above 94%.

Manufactured in 3 x 3 mm MLF(TM)-10L package, 1 MHz MIC2208 employs flexible design capable of providing variety of outputs. External compensation allows use of ultra-small inductor and output capacitor values, while providing low noise operation. Suited for point-of-load applications, IC offers 2.7-5.5 V supply voltage and output current to 3 A. It features 100% max duty cycle, adjustable output...

Step Down Regulator features 4 MHz switching frequency.

Using constant frequency, current mode architecture, Model LTC3412A can deliver up to 3 A of continuous output current at voltages as low as 0.8 V from 4 x 4 mm QFN package. It operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or NiMH applications. Synchronous buck regulator uses internal switches with RDS(ON) of 0.065 and 0.077 ohms to deliver efficiencies up to...

Buck Regulator offers PWM switching frequency to 500 kHz.

Integrating 75 V N-channel MOSFET and emulated, current-mode PWM, Model LM5005 steps down input voltage from 7-75 V to produce regulated 2.5 A power supply, adjustable from 1.225-65 V. Current-mode control provides inherent line voltage feed-forward and loop compensation. Bi-directional oscillator synchronization pin allows multiple LM5005 regulators to self-synchronize or switch synchronously...

Synchronous Controller includes output tracking function.

With input range of 2.75-9.8 V, 2-phase, dual step-down switching regulator, Model LTC3736-2 deliver outputs as low as 0.6 V. Constant frequency current mode architecture with MOSFET VDS sensing eliminates need for sense resistors. By operating 2 controllers out of phase, power loss and noise due to ESR of input capacitance are minimized. Switching frequency can be programmed up to 750 kHz and...

Voltage Regulator System IC suits automotive applications.

Integrated intelligent system power IC, EM6152, incorporates multi-mode windowed watchdog timer, reset logic, and 5 V LDO automotive voltage regulator. Supporting operation up to 40 V, it comes in 8-pin SO8 package with regulator current output up to 100 mA or PSOP-16 power package rated to 400 mA. IC operates over -40 to +125Ã-

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.