
New Inflatable Tube and Pipe Purging System Ensures Oxidation-Free Welds
Designed for use where the temperatures may reach as high as 300ºC (572ºF). Can keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle. Features PurgeGate® device to prevent over-inflation of, and damage to the inflatable dams.
Read More »
New Purging/Pressurization Units Available in Universal, Vertical and Horizontal Configurations
Ideal for enclosures up to 250 cubic feet in Class I and II Division 2, Group A, B, C & D Hazardous Locations. Simply mounts to any side of protected enclosure and through a panel cutout. Applications include large refinery control panels, special analyzers, portable laboratory equipment and more.
Read More »
Remote Weld Purge Monitoring
The exposure to oxygen during the welding process on alloys such as stainless steel will result in discolouration and can severely reduce corrosion resistance properties. It is therefore crucial that the oxygen level is monitored throughout the welding process and kept to a desired level. However, is often difficult for welding personnel to get an accurate reading of the oxygen level at the...
Read More »
Latest Dew Point Sensor Integrates with Argweld Weld Purge Monitors
Predicts when water will form on metal surfaces in the welding environment. Both oxygen (02) and moisture (H20) content are shown as ppm value on OLED screen in split format. OLED screen displays both oxygen (02) and moisture (H20) content as ppm value.
Read More »
Microcontrollers in Power Electronics
This white paper explores the power supply advantages of digital microcontrollers, as well as how digital power supplies can be used to manage entire systems.
Read More »
PurgElite® Tandem Pipe Purging System
Inflatable Tube and Pipe Purging Systems simplify the process of inert gas purging by restricting weld purge volumes, making huge savings in time and inert gas. Huntingdon Fusion Techniques HFT® design and manufacture PurgElite®, a range of low cost Tube and Pipe Purging Systems that help to achieve a clean, oxide free, zero colour weld in just minutes, available from 1” (25 mm). Ron Sewell,...
Read More »
New N2 Purge System Comes with Two Pneumatic Connections
Features low-friction piezo-based technology that limits the size of abrasion, causing particles to about 0.1 μm. Closed-loop control ensures accurate, stable, and linear flow rate without hysteresis. Ideal for Front Opening Unified Pod (FOUP) applications by maintaining consistent and low-particle nitrogen supply.
Read More »Reliable Oxygen Analyzer for Welding Titanium
When welding titanium, it is essential that the oxygen level surrounding the weld is purged down to as low as 50 ppm. Measuring the oxygen level with a reliable oxygen analyzer is the most efficient way to know exactly when to commence welding. Specifically designed for Purge Chamber welding, the PurgEye® Desk is leading the way in inert gas purging technology by reading oxygen levels from 1,000...
Read More »
New Pipe Purging System for High Strength Steel Pipe Joints
Available in sizes from 6 to 88” (150 to 2,235 mm). HotPurge® allows the purge to be safely continued for up to 24 hours whilst pre-heating, welding and post weld heat-treating with the purge system remaining in place. Incorporates RootGlo®, a central band for simple positioning inside the pipe, which will illuminate inside the dark pipe for up to 20 hours.
Read More »
QuickPurge Systems with Additional Gas Input Line
Reduces space that needs to be purged for pipes as large as 88”. Inflated and connected to a Weld Purge Monitor® to measure the exact oxygen level throughout the welding cycle. 1,400 mm system can be purged down to 100 ppm ready for welding in just 55 minutes.
Read More »
Oxide Free Titanium Welds with the PurgEye® Desk
The Welding Institute states that “Titanium is a reactive metal; it will burn in pure oxygen at 600°C and in nitrogen at around 800°C. Oxygen and nitrogen will also diffuse into titanium at temperatures above 400°C raising the tensile strength but embrittling the metal. Despite this reactivity titanium is used extensively in chemical processing, offshore and aerospace applications.” In...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »