New Printing & Duplicating Equipment Products

S500 3D Wax Printers come with Solidjet technology.

Consisting of Midas™ castable material, Melt™-I dissolvable support, S500 3D Wax Printers produce directly castable wax patterns. Allowing for organic shapes with undercuts, overhangs, thin walls and interlocking parts, unit’s Midas provides a clean burnout with no thermal expansion whereas Melt-I reduces stress points on shapes with thin walls and delicate details.

MINI Analog Pro Signal Splitter can isolate inputs and outputs to 3 kV.

Offering maximum of 600 Ω load per output, MINI Analog Pro Signal Splitter duplicates the analog input value. Accepting analog signals in 0-12 V DC and 0-24 mA ranges, the output can be configured within 0-10.5 V DC and 0-21 mA ranges independently. Providing fine 0.01 mA and 0.0005 V output increments, the splitter comes in a 6.2 mm wide housing. Units can be operated in -40 to +70 degrees C...

LCD Video Processor comes with two separate H/V scalers.

Available in TW8844 and TW8845 models, LCD Video Processor is compatible with ISL78302 dual LDO, ISL78322 dual 2A/1.7A synchronous buck regulator and ISL78228 dual 800mA synchronous buck regulator. Capable of displaying live video with graphics in less than 0.5 seconds, unit comes with two digital input ports up to 24-bit RGB and two input measurement engines. Integrated with EEPROM fast boot,...

Xcavator™ Grinding Wheels minimize grinding time.

Incorporating Comfort Max™ Technology for minimizing vibration, Xcavator™ Grinding Wheels are tested on tungsten carbide and tempered steel metals. Featuring UHR (ultra-high removal) multi-layer manufacturing technology that prevents edge falking, units is suitable for use on steel and stainless steel.

The Ultimate Guide To PCB Hardware

This guide will help you understand the different components that can enhance the performance of your printed circuit board design.

Magnetic Marker is suitable for angle sensor applications.

Magnetic Marker is designed to suit mounting applications for RFC and RFD series sensors. Featuring axial mounting magnet, unit is operated by varying offsets and separation allowance specifications over sensor. Available in four models, product’s magnet is mounted on shaft with seven different size markers.

DesignWare® EV6x Vision Processors come with programmable CNN engine.

Supporting AlexNet, VGG16, GoogLeNet, Yolo, Faster R-CNN, SqueezeNet and ResNet neural networks, DesignWare® EV6x Vision Processors are available in EV61, EV62 and EV64 models. Embedded with MetaWare EV Development Toolkit, unit’s CNN engine delivers power efficiency of up to 2,000 GMACs/sec/W on 16-nm FinFET process technologies. Integrating up to four 512-bit vector DSPs, Product features...

Penguin Computing Announces Its Next-Generation Tundra Open Compute Servers Featuring Cavium's ThunderX2™ Processors

High-Performance Server Platforms Optimized for HPC & Hyperscale Workloads FRANKFURT, Germany and SAN JOSE, Calif., June 19, 2017 - Penguin Computing, a provider of high-performance computing, enterprise datacenter and cloud solutions, announced availability of its Tundra™ Extreme Scale (ES) server platforms based on Cavium, Inc. (NASDAQ: CAVM), second generation ARMv8-based ThunderX2...

Square Pole Technology Boosts Productivity in Flat Grinding

SCHUNK MAGNOS parallel pole, square pole, and radial pole plates ensure reliable workpiece clamping, quick workpiece changes, and particularly efficient processes in grinding applications. 200% increased productivity Among other things, SCHUNK MAGNOS square pole grinding plates boost productivity by up to 200%, compared to conventional solutions using parallel pole technology. Movable pole...

X80 Processor supports 4K at 120Hz on dual or quad cables.

Featuring HDMI 2.0, Displayport 1.2, and 12G HDSDI, Christie Spyder X80 Processor supports 24 inputs and 16 outputs. Capable of displaying 4K at 60Hz on single channel, unit comes with card chassis based design. With low latency, unit allows 24/7 operation. Embedded with Christie Spyder Studio client software, product allows user to mix and match multiple SD, HD, 4K, and stereoscopic video...

Plasticizing System for PLA allows for longer working life.

Used for processing polylactic acid bioplastics, Xaloy® PLA Screw and Barrel Package consists of 17-4 ph stainless steel with Xaloy® X-183™ hardfacing. Minimizing shear and controlling melt temperature, unit with mixing segment delivers homogenized melt.