New Power Supplies Products

Inverters/Monitors are compatible with SunPower solar panels.

SPRx Series Inverters provide maximum ac power output from 3,300-4,000 W, while SPRx Series Inverter Monitors track efficiency and connect to inverters using CAT 5 Ethernet cable. Graphical backlit LCD screen can be used to monitor single or multi-inverter photovoltaic system from one indoor location.

DC/DC Converter offers output disconnect and soft-start.

Model LTC3526 1 MHz current mode, synchronous boost dc/dc converter has internal 500 mA switches that deliver 5 V output from 0.85-4.4 V input, making it suitable for Li-Ion/Polymer or single/multicell alkaline/NiMH applications. Available in 2 x 2 x 0.75 mm DFN package, LTC3526 delivers up to 100 mA of continuous current at 3.3 V from single alkaline cell. Synchronous rectification enables...

DC/DC Converters suit defense and avionics applications.

Available in 5, 15, and 35 W ratings, MTC series converters meet MIL-STD 810F specification for temperature, shock, vibration, bump, altitude, and salt fog. They have input range of 15.5-40 V and can operate through transients of 10 V for 10 sec and up to 50 V for 1 sec and are suitable for systems with 28 V input. Converters minimize external circuitry and include inhibit line, output voltage...

Power Supplies are offered in parallel versions.

Modular DIN rail mounted power supplies offer 24 Vdc output in single-phase and 3-phase inputs with 3, 5, 10, 20, and 30 A capacity. In addition to auto-ranging input and pluggable terminations, compact UL508C listed units provide short circuit, overload, over temperature, and input/output protection. Internal oring diodes and alarm contact makes supplies appropriate for redundant and back-up...

How to Choose the Proper Vibratory Conveyor for Your Needs

At Triple/S Dynamics, our goal is to match every single client to a conveyor system that meets their unique needs. This guide aims to provide information on the different types available to help you make the best decision.

Boost Converter offers dynamic output voltage programming.

Targeting OLED, LCD, and CCD applications, Model AAT1232 is 24 V, 100 mA boost converter for portable products powered by single-cell Lithium-ion batteries. It operates at switching frequency up to 2 MHz and maintains 80% efficiency across load currents down to 1 mA. Available in Pb-free 16-pin, 3 x 4 mm TDFN package or Pb-free 12-pin TSOPJW package, device is specified over -40 to +85Ã-

DC/DC Converter powers series-connected white LEDs.

Delivering 50 mA up to 24 V, Model AAT1231 drives 6 white LEDs in series or up to 12 white LEDs in parallel/series configuration using digital single-wire interface. Inductive boost dc/dc converter has 2 MHz switching frequency, operates over -40Ã-

Power Supplies come in rugged, zinc-plated steel housing.

TRIO power supplies are designed for applications requiring 2.5-20 A of 24 Vdc power and are offered in 32-115 mm wide housings. DIN rail mounted units operate at 0-70Ã-

Buck Regulator has triple output design.

Offered in 3 x 4 mm DFN package, LTC3446 combines 1 A step-down dc/dc converter and two 300 mA VLDO regulators. This 1 A synchronous buck regulator IC operates from 2.5-5.5 V and has 2.25 MHz switching frequency. With independent enable pin for each supply, product generates output voltages as low as 0.8 V from buck regulator and 0.4 V for each VLDO. Synchronous buck delivers efficiencies to 90%,...

Step-Down DC/DC Converter delivers up to 300 mA/channel.

Using constant frequency current mode architecture, dual-channel Model LTC3547 operates from input voltage of 2.5-5.5 V with efficiencies as high as 96%, making it suited for Li-Ion/Polymer or multicell alkaline/NiCad/NiMH applications. Housed in 3 x 2 mm DFN package, synchronous buck regulator generates output voltages as low as 0.6 V. Switching frequency of 2.25 MHz enables use of tiny ceramic...

Synchronous Buck Controllers convert 22 V to 0.8 V.

With integrated 5 V LDO bias, Models SP6133 and SP6136 drive pair of external N-channel FETs switching at 300 kHz and 600 kHz frequencies, respectively, from single voltage rail for POL applications. Achieving efficiencies up to 97%, devices have input voltage from 4.5-24 V with duty cycles down to 3.5%, enabling direct conversion from high input voltage to low output voltage in single step....

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.