DC/DC Converters provide 75 watt triple output.
DC to DC Power Supplies (Converters)

DC/DC Converters provide 75 watt triple output.

HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...

Read More »
AC Power Sources available in single and three phase.
Power Supplies

AC Power Sources available in single and three phase.

ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...

Read More »
DC/DC Converters provide efficiencies above 90%.
DC to DC Power Supplies (Converters)

DC/DC Converters provide efficiencies above 90%.

V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...

Read More »
DC/DC Converter takes up small amount of DIN-rail space.
DC to DC Power Supplies (Converters)

DC/DC Converter takes up small amount of DIN-rail space.

CP-DCDC 50 W family is available with 12 or 24 Vdc inputs, and has outputs including 5 Vdc @8 A, 12 Vdc @3 A, and 24 Vdc @2 A, with continuous short-circuit protection on output, and over and under voltage protection. Status indication is standard. Slim unit occupies only 2 1/4 in. of DIN-rail space. Module, with metal housing, mounts on TS 35 DIN rail. Optional chassis-mount hardware is...

Read More »
DC/DC Converters suit low voltage applications.
DC to DC Power Supplies (Converters)

DC/DC Converters suit low voltage applications.

PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...

Read More »
Switchmode Power Supplies fit automation applications.
Power Supplies

Switchmode Power Supplies fit automation applications.

Compact connectPower CP-SNT 55W requires 2 1/4 in. of TS 35 DIN-rail. Models are available in four versions: 24 to 28 Vdc at 2.3 A; 5 Vdc at 3 A; 12 to 15 Vdc at 3.0 A; and 48 Vdc at 1.04 A. All have adjustable outputs, metal housings, inputs of 85 to 265 Vac or 120 to 300 Vdc, overcurrent shutdown with automatic restart, thermal shutdown, and approvals including UL 508 listing, CE, and CSA. The...

Read More »
Power Supplies

Power Supply provides 90% efficiency rating.

Switch mode wipos Series provides 20 A, 24 V with single-phase, 100 to 130 Vac input. Unit features power factor correction according to EN 61000-3-2, temperature-prompted power limitation, adjustable output voltage of 23 to 27 V, and selectable output current balancing during parallel operation. Ramp up time is

Read More »
AC/DC Power Supplies provide output of 5 to 22 watts.
Power Supplies

AC/DC Power Supplies provide output of 5 to 22 watts.

OFM Series ultraminiature, modular, switching power supplies accept universal input from 85 to 265 Vac and 47 to 440 Hz. Single outputs of 5 to 24 Vdc are provided by the 18 models. Units include power-good LED and output adjustment potentiometer, and will operate over ambient temperature of 0 to 48 deg C without forced cooling or output power derating. All models contain over voltage and short...

Read More »
Switching Power Supply offers high efficiency in small package.
AC to DC Power Supplies

Switching Power Supply offers high efficiency in small package.

Rated at 130W, AC/DC Model AAD130 offers 83% efficiency, and measures only 1.25 x 3.0 x 5.0 in. With 4 outputs, power-factor-corrected switching power supply features current sharing between outputs of similar units. AAD130 is capable of correcting input waveform to better than 0.98 power factor at full load between 90 and 264 Vac input. It meets IEC1000-3-2 harmonic distortion specifications and...

Read More »
Power Supply fits CompactPCI(R) systems.
Power Supplies

Power Supply fits CompactPCI(R) systems.

Model cPCI35ODC 6Ux8HP hot-swap supply is in compliance with PICMG(TM) 2.11 R1.0 Power Interface Spec and other CompactPCI standards. Delivering 350 W of continuous output power, unit supports standard PCI output voltages of +5 V, +3.3 V, +12 V, and -12 V with no minimum load requirement. Active current sharing and internal ORing diodes are included to support high availability (HA) applications...

Read More »

All Topics