Switching Power Supplies range from 5 to 30 watts.
Power Supplies

Switching Power Supplies range from 5 to 30 watts.

Economod PCB mount modular power supplies offer single, dual, or triple outputs and universal input range from 85 to 265 Vac with 47 to 440 Hz. Single outputs are 5, 12, 15, and 24 Vdc. Dual outputs are ±5, ±12, ±15 and +5,+12 Vdc. Triple outputs include 5, ±12 and 5, ±15 Vdc. All models are fully encapsulated and are over voltage and short circuit protected....

Read More »
AC to DC Power Supplies

Power Supplies meet FCC and EN Class B standards.

RKW 1500 Watt series single output, low noise power supplies provide 3.3 to 48 Vdc outputs from 85 to 264 Vac with power factor correction. Conducted and radiated emissions are suppressed to meet FCC Class B, VCCI Class B, EN 55011-B and EN 5022-B limits with external ac filter. Without filter, supplies meet Class A standards. Supplies have remote on-off voltage control and current balance...

Read More »
AC to DC Power Supplies

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Stick/TIG Inverter provides simple operation.
AC to DC Power Supplies

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
DC/DC Converters provide 75 watt triple output.
DC to DC Power Supplies (Converters)

DC/DC Converters provide 75 watt triple output.

HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...

Read More »
AC Power Sources available in single and three phase.
Power Supplies

AC Power Sources available in single and three phase.

ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...

Read More »
DC/DC Converters provide efficiencies above 90%.
DC to DC Power Supplies (Converters)

DC/DC Converters provide efficiencies above 90%.

V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...

Read More »
DC/DC Converter takes up small amount of DIN-rail space.
DC to DC Power Supplies (Converters)

DC/DC Converter takes up small amount of DIN-rail space.

CP-DCDC 50 W family is available with 12 or 24 Vdc inputs, and has outputs including 5 Vdc @8 A, 12 Vdc @3 A, and 24 Vdc @2 A, with continuous short-circuit protection on output, and over and under voltage protection. Status indication is standard. Slim unit occupies only 2 1/4 in. of DIN-rail space. Module, with metal housing, mounts on TS 35 DIN rail. Optional chassis-mount hardware is...

Read More »
DC/DC Converters suit low voltage applications.
DC to DC Power Supplies (Converters)

DC/DC Converters suit low voltage applications.

PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers