DC/DC Converter Series has no minimum load requirement.
DC to DC Power Supplies (Converters)

DC/DC Converter Series has no minimum load requirement.

Surface-mount SXQ50 DC/DC converter series features outputs up to 50 W from quarter-brick, open-frame package which measures 2.3 x 1.46 x 0.4 in. Series employs fixed-frequency switching technology, and is available in four models with 5.0, 3.3, 2.5, or 1.8 V outputs (which can be trimmed from 90% to 110% of nominal). Units are rated to 20 A (1.8 and 2.5 V models), 15 A (3.3 V unit), and 10 A...

Read More »
Switching Power Supply provides up to 6000 W.
Power Supplies

Switching Power Supply provides up to 6000 W.

Bulk-front-end HPS15 can deliver 1500W of output power at 85% efficiency. Rack of 4 units can deliver 6,000 W of clean bulk dc power in 1,500 cu in. It has ac input range of 108 to 264 Vac and 0.98 power factor correction that meets EN61000-3-2 requirements for input current harmonic content. Each module has over-voltage and overload protection on all outputs, active inrush current limiting...

Read More »
DC Power Supplies generate high power in DIN rail package.
Power Supplies

DC Power Supplies generate high power in DIN rail package.

PS Series supplies 2 to 20 amps at 24 Vdc and 4 amps at 12 Vdc. Input voltage is switch selectable to 115/230 Vac. DIN rail mounts and removable plug connections make installation easy. Units include constant-current, short-circuit protection, which limits output current as voltage is reduced, to safely protect control components from direct shorts and device failures. Power supplies meet UL/cL...

Read More »
DC/DC Converters operate from nominal 3.3 V source.
DC to DC Power Supplies (Converters)

DC/DC Converters operate from nominal 3.3 V source.

V7PC-10C series non-isolated, step-down DC/DC converters provide up to 10 A output current from 3.3 V bus input. Output voltages range from 2.5 to 1.0 V; efficiencies range up to 92% full load. Singe-in-line (SIP) converters with thermal management require less than 1 square in. of PCB space. Operate to 70° C with no derating over 3.0 to 3.6 V input range. Optional remote sense pin is...

Read More »
Power Supplies are controlled remotely.
Power Supplies

Power Supplies are controlled remotely.

Single output, low noise, 300 W RKW series has remote on-off, remote voltage control from zero to maximum rated output voltage, and current balance terminal for parallel operation. Single dc outputs from 3.3 to 48 V with active power factor correction are provided from 85 to 264 Vac mains. Conducted and radiated emissions are suppressed to FCC Class B, EN 55011-B and EN 55022-B limits with no...

Read More »
External Power Supplies come in wall-mount and desk-top styles.
Power Supplies

External Power Supplies come in wall-mount and desk-top styles.

CE-compliant PW125 universal switch-mode power supplies are available from 21 to 48 W. Nine models range from 3 to 48 V with input voltage of 100 to 250 Vac. Desk-top models measure 3.92 in. L x 2.58 in. W x 1.61 in. H. Wall-mount models measure 1.61 in. long x 2.58 in. wide x 3.92 in. high. Power suppies have TUV EN60950, UL/C-Ulus 1950, Australian Approval and MITI safety approval ratings.

Read More »
LED Power Supplies are designed for lighting applications.
Light Emitting Diodes (LED)

LED Power Supplies are designed for lighting applications.

Xitanium(TM) LED drivers are rated for 50,000 hr life. Since they are UL Class 2 and FCC Class B rated, they can be used virtually anywhere, with no special wiring routing requirements. Drivers can operate as low as -40 deg C and have 90 deg C case temperature rating. Xitanium Series includes 120 V, constant output current drivers for 12 W (350 mA), 17 W, (700 mA), 25 W (1050 mA), and 40 W (1750...

Read More »
Power Supplies

Power Supplies provide 24 Vdc.

Cutler-Hammer IT models operate from 100 to 480 V at 1 to 40 A. Power supplies offer high outrush capacity of more than five times steady state current to close dc contactors and provide power for starting up communication networks and large capacity systems. Long ride through capabilities keep power flowing after voltage has dropped and allows power supplies to ride through power dips and...

Read More »
Uninterruptible Power Supplies protect networking equipment.
Power Supplies

Uninterruptible Power Supplies protect networking equipment.

Pulsar Evolution Models 1500VA to 3000VA meet needs of security equipment and network and storage servers. Model 1500VA is only 1.73 in. (1U) high. Line-interactive models keep equipment running for at least 4 hr. For longer backup times, external battery modules can be added to Models 2200 and 3000, while Model 3000XL allows up to 12 battery module extensions. Local or remote network power...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers