Converters provide 95% efficiency.
DC to DC Power Supplies (Converters)

Converters provide 95% efficiency.

Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....

Read More »
Power Supplies

Power Supply offers 2:1 output adjustment range.

Series LPS170 single-output, 175 W switching power supply, provides 2.5 to 54 V of DC power. Active power-factor corrected unit complies with EN61000-3-2 requirements for input current harmonic content. Switcher, with universal input voltage range of 85-264 Vac, 120-370 Vdc and frequency range of 47-400 Hz, includes 2 A +5 V standby output and 1 A +12 V auxiliary output. Unit measures 1.5 in....

Read More »
Pulsed Power Source suits orbital pipe welding.
AC to DC Power Supplies

Pulsed Power Source suits orbital pipe welding.

Model MPS-4000 microprocessor-based, portable inverter power source is designed for GMAW/FCAW process welding applications. Integral weld Head controller operates all Pipeliner weld Head models. Power source provides synergic control of electrode speed and power output. Factory-developed programs are stored for many combinations of alloy, electrode diameter, and shielding gas. Model MPS-4000 is...

Read More »
Lamp Drivers provide lighting for PDAs and signage.
DC to AC Power Supplies (Inverters)

Lamp Drivers provide lighting for PDAs and signage.

Model D305 is capable of driving electroluminescent (EL) lamps as large as 100 cmÂ-² with high voltage AC output from 2.5 to 7.0 Vdc supply voltage. It is available in MSOP-10 package in tape and reel. Model D306A can convert 2.0 to 16.0 Vdc supply input to up to 400 V peak-to-peak AC signal that can drive EL lamps as large as 180 cm². It is available in surface-mount SOIC-16 with...

Read More »
Power Supply features digital display.
Power Supplies

Power Supply features digital display.

Model 30354-91 is a 110/220 Vac, 50/60 Hz power supply measuring 8 x 4.75 x 9 in. It provides triple outputs including 0-30 V, 0-3 A (adjustable) and 5 V and 12 V (fixed). Independent 5 and 12 V outputs provide power for TTL and CMOS projects. Unit includes overload and short circuit protection with constant voltage or current. Current limiting front panel LED indicator and binding posts for...

Read More »
Converter offers low profile with standard pin out.
DC to DC Power Supplies (Converters)

Converter offers low profile with standard pin out.

PowerQor® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...

Read More »
Power Supplies

Power Switcher provides wide-range adjustability.

Model LPQ142, with active power-factor correction, offers user adjustability on 3 of its 4 output voltages, one with range of ±3.3 to 25 V. It features universal input range of 85-264 Vac and 120-300 Vdc, and frequency range of 47-63 Hz. Providing 3.45 W/cu in., unit is 1.5 in. tall and 1U-rack ready. It operates at 75% efficiency while delivering full load. With 30 cfm of forced air across...

Read More »
Power Supply provides active power-factor correction.
Power Supplies

Power Supply provides active power-factor correction.

Enclosed Series SP provides output power from 75 to 500 W. All models accept universal input from 85 to 265 Vac and 50 models provide single outputs from 3.3 to 48 Vdc. Switching power supply has soft-start circuitry, EMI filtering, power-good LED indicator, and output-adjustment potentiometer. It operates over ambient temperature of -10 to +50°C without forced cooling or output power...

Read More »
DC-DC Converter extends battery life in portable applications.
DC to DC Power Supplies (Converters)

DC-DC Converter extends battery life in portable applications.

Inductorless, 100 mA FAN5660 converter achieves over 90% efficiency at full load with typical operating current of 120 Â-µA. It inverts +l.5 V to +5.5 V input to corresponding -l.5 V to -5.5 V output. Unit can also split or double full load, +5.0V input voltage, of power supply or battery, providing +2.25 V in splitter mode and +9.5 V in doubler mode. Equipped with onboard oscillator...

Read More »
Linear Power Supply features screw terminal connections.
Power Supplies

Linear Power Supply features screw terminal connections.

Model CM1.5.1000 5 W power supply provides low noise 5 V output at up to 1 A. It can be powered by 100, 110, 220, 230, or 240 Vac. Unit is housed in fully encapsulated 4 x 2.7 x 1.4 in. plastic enclosure, which incorporates step down barrier strip. Model CM1.5.1000 has output voltage accuracy of ±0.1% and 1500 Vrms isolation voltage. Short circuit protection is provided through foldback...

Read More »

All Topics