DC/DC Boost Converters have linear regulation functionality.
DC to DC Power Supplies (Converters)

DC/DC Boost Converters have linear regulation functionality.

Utilizing synchronous rectifier based on PWM controller, TPS6102x family of synchronous, 1.5 A switch DC/DC boost converters provide up to 96% power conversion efficiency from input voltage range of 0.9-5.5 V. ICs can operate in down-mode with linear regulation if input voltage reaches or exceeds output voltage. Available in 10-pin, 3 x 3 mm QFN package, products have power save mode, 25...

Read More »
Step-Down Converters provide up to 95% power efficiency.
DC to DC Power Supplies (Converters)

Step-Down Converters provide up to 95% power efficiency.

Series TPS6222x consists of 400 mA, synchronous DC/DC converters that support input voltage from 2.5-6 V, output voltage of 6 V down to 0.7 V, and output current up to 400 mA. They operate with fixed switching frequency of 1.25 MHz. In Power Save Mode, switching frequency is reduced and quiescent current is typically 15 Â-µA. Converters come in 5-pin ThinSOT-23 package and are suited for...

Read More »
DC/DC Converters feature efficiencies to 91%.
DC to DC Power Supplies (Converters)

DC/DC Converters feature efficiencies to 91%.

Utilizing multilayer/PCB planar magnetics, Series HB provides up to 200 W of output power at currents to 80 A. Available in single, dual, and triple outputs from 1.5-13 Vdc, units offer input ranges of 18-36 and 36-75 Vdc. They include input under-voltage lockout, output OVP, and over-temperature protection. Line/load regulation is ±0.1% and ripple/noise performance is as low as 50 mV. All...

Read More »
DC-DC Converters feature power factor correction.
DC to DC Power Supplies (Converters)

DC-DC Converters feature power factor correction.

Series AIF-PFC surface-mount converter modules are parallel-configurable and can deliver up to 1,600 W of power from input range of 85-264 Vac. They offer power densities up to 290 W/inÂ-³. Embedded functions provide monitoring, protection, and adjustment capabilities as communication bus that can store end user information. Units operate from 40-100°C and reach 95% efficiency at 230...

Read More »
Bus Converters deliver up to 25 A at 12 V.
Power Supplies

Bus Converters deliver up to 25 A at 12 V.

Packaged in open-frame quarter-brick, ALQ25B50 series bus converters deliver up to 300 W of output power at up to 96% efficiency, and accept input range of 42-53 V. Products utilize open loop DC conversion scheme, enabling them to exhibit resistive output characteristics to ease system stability management with multiple point of loads employed in distributed power architecture. Devices offer...

Read More »
DC/DC Step-Down Controllers are 95% efficient.
DC to DC Power Supplies (Converters)

DC/DC Step-Down Controllers are 95% efficient.

Non-synchronous TPS6420x series controllers conserve battery life in battery-powered applications with input voltages from 1.8-6.5 V that must be stepped down to regulated voltage to 1.2 V and provide output currents from 1-3 A. Housed in 6-pin SOT-23 packages, devices feature quiescent current of 20 Â-µA and drive external P-channel MOSFET. Products use minimum on-time and off-time control...

Read More »
UPS Systems offer output to 500 kVA.
Power Supplies

UPS Systems offer output to 500 kVA.

Digital Energy(TM) SG Series UPS systems are built upon digital processing design. Unique Redundant Parallel Architecture eliminates single points of failure, while low output voltage distortion results in clean output waveform. Additional features include Space Vector Modulation, output isolation transformer, and battery management. Front service access minimizes footprint, and integrated input...

Read More »
Power Supplies

Line-Interactive UPS offers server and network protection.

PowerSure PSI provides power protection in sizes up to 3 kVA. It can be configured as self-standing mini-tower or rack-mounted within 2U space. Double-boost, single-buck technology protects against surges and sags. PowerSure PSI includes 7-8 battery-backed outlets, data line surge protection, user-replaceable hot-swap batteries, configurable input voltage window, TVSS circuitry, and remote...

Read More »
Power Supply meets external power needs.
Power Supplies

Power Supply meets external power needs.

Model PW132 101 W switch mode power supply, featuring 100-240 Vac input power, provides regulated output with low ripple, and complies with EMI/RFI regulations. Typical electrical efficiencies are 85% and mean time before failure exceeds 100,000 hours. Applications include medical monitors/displays and respirators, point-of-sale terminals, wireless local area networks, and satellite receivers.

Read More »
Power Supplies

Uninterruptible Power Supplies expand to 500 kVA.

Digital Energy(TM) SG Series, built on digital processing design, features redundant architecture that eliminates single points of failure. Extremely low output voltage distortion results in very clean output waveform. Units include Space Vector Modulation, output isolation transformer, and automatic start-up procedure with user-friendly interface. Integrated input filter reduces input current...

Read More »

All Topics