Rugged DC/DC Power Supply delivers 1,000 W in harsh environments.
DC to DC Power Supplies (Converters)

Rugged DC/DC Power Supply delivers 1,000 W in harsh environments.

Incorporating dual Powerstax F501 DC/DC converters, TVS1001 offers step-up or step-down conversion. Electronic circuits are sealed to withstand exposure to harsh, dusty environments and are cooled via mechanically isolated, field-replaceable fan unit that offers choice of speeds depending on operating environment. Accommodating 11-36 Vdc input, power supply can be configured over range of...

Read More »
DC/DC Converter (40 W) occupies 2 x 1 in. footprint.
DC to DC Power Supplies (Converters)

DC/DC Converter (40 W) occupies 2 x 1 in. footprint.

Providing up to 40 W of fully regulated power, TMH Series has 2:1 input range with nominal input voltages of 12, 24, and 48 Vdc. Single outputs are available in 3.3, 5, 12, and 15 Vdc, while dual output options include ±12 and ±15 Vdc. Operating with efficiencies as high as 92%, series offers remote on/off, output trim, and short circuit protection. It performs from -40 to +55°C...

Read More »
Uninterruptible Power Supply features interactive LCD screen.
Power Supplies

Uninterruptible Power Supply features interactive LCD screen.

Equipped with Green technology, Model ECO650LCD helps conserve electricity without sacrificing power protection. Unit features 8 outlets, including 3 energy-saving ECO surge outlets that automatically turn off idle equipment. USB port and included USB cable enable automatic unattended shutdown with PowerAlert software. Providing 99% power efficiency, RoHS-compliant power supply has flat-pack...

Read More »
Power Interface Module simplifies low-EMI design in ATCA systems.
Modules

Power Interface Module simplifies low-EMI design in ATCA systems.

Simplifying design in blade servers based on ATCA (PICMG 3.0) systems, quarter-brick PIM4328P (390-540 W) leverages low-EMI design rules and best practices to minimize external filtering needed to meet CISPR Class B EMC standards. Product operates over 36-75 V, and main unit can sustain permanent output current of 10 A without forced airflow in temperatures to +70°C. Respectively, output is...

Read More »
DC to DC Power Supplies (Converters)

DC-DC Controller ICs provide gate drive signal shaping.

Capable of providing up to 100 W, AS12xx Series is configurable for flyback, forward, boost, or buck power topologies used in isolated and non-isolated converters. Units feature 8.5-57 V input voltage, 100-500 kHz programmable PWM, and programmable soft start. FET gate drive signals are shaped to minimize switching noise and optimize EMI. Housed in 5 x 5 mm QFN package, RoHS-compliant ICs deliver...

Read More »
Miscellaneous Software

National Semiconductor Introduces New WEBENCH Processor Power Architect at Avnet's Design Strategies for ARM Systems Design Summit

New Tool Accelerates Design of Multiple Load Power Supplies for Atmel and Freescale ARM Processors SANTA CLARA, Calif. - National Semiconductor Corp. (NYSE:NSM) today kicked off the Avnet (NYSE:AVT) Design Strategies for ARM Systems Design Summit in Santa Clara with the introduction of its new WEBENCH® Processor Power Architect, the industry's first online design tool to model and optimize...

Read More »
DC to AC Power Supplies (Inverters)

Cenergy Power Unveils 272 Kilowatt (kW) Solar System for Live Oak Farms

LE GRAND, Calif. -- Live Oak Farms, a reputable tomato and bell pepper grower/packer/shipper based out of the Central Valley, today announced the commissioning of their 272 kilowatt (kW) solar photovoltaic system. The roof mounted solar photovoltaic (PV) system spans across two buildings, will offset over 84% of energy costs and provide a payback before the solar system's 4th birthday. Cenergy...

Read More »
Micro DC-DC Converters reduce noise, board space occupation.
DC to DC Power Supplies (Converters)

Micro DC-DC Converters reduce noise, board space occupation.

Measuring 2.5 x 2.0 x 1.1 mm (max), LXDC2HL series buck converters work with 2.3-5.5 V source, such as Li-ion battery, and use ferrite multilayer substrate that incorporates power inductor. Length of connection between controller IC and inductor is close to zero, and efficiency is 88% typ. Across 7 models, output voltages range from 1.2-3.3 V with max load currents from 600-300 mA. All have...

Read More »
AC-DC Power Supplies offer 94% typical efficiency.
AC to DC Power Supplies

AC-DC Power Supplies offer 94% typical efficiency.

Operating directly from 3-phase inputs, ADN-C Series has 320-540 Vdc input range, capable of accommodating standard line voltages worldwide. Models ADN20-24-3PM-C and ADN40-24-3PM-C are rated 480 W and 960 W and can deliver up to 20 A and 40 A, respectively. Both DIN rail mounted models produce single 24 Vdc output, which is user adjustable up to 28 Vdc. Housed in IP20-rated metal cases, supplies...

Read More »
Dual Output DC/DC Controller boosts power and reliability.
DC to DC Power Supplies (Converters)

Dual Output DC/DC Controller boosts power and reliability.

Exhibiting up to 95% efficiency, LTC3869/-2 synchronous, step-down DC/DC controller can maintain better than ±4% current mismatch between channels during steady state and transient conditions when both outputs are paralleled. Onboard 1.1 ohm gate drivers minimize switching losses and allow use of external MOSFETs to produce output currents to 25 A per channel with output voltages from...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics