DC/DC Backlight LED Driver powers up to 6 strings in LCDs.
DC to DC Power Supplies (Converters)

DC/DC Backlight LED Driver powers up to 6 strings in LCDs.

Featuring 6 outputs individually capable of providing up to 50 mA of constant current, each device in second generation ALD6 series can drive 1-, 2-, 3-, or 6-string configurations of LEDs connected in series/parallel for backlighting LCDs. Dimming controls with resistive, analog, or PWM inputs provide smooth LED brightness transitions. Available in DIP or SMD packages that measure 23 x 21 mm,...

Read More »
DC/DC Bus Converter serves distributed power applications.
DC to DC Power Supplies (Converters)

DC/DC Bus Converter serves distributed power applications.

Supplied in quarter brick open frame package, RBC-12/17-D48 produces up to 210 W output power, accepts 36-75 V input, delivers 92.5% efficiency at full load, and offers ±1.5% Vout regulation. Regulated Bus Converter (RBC), optimized for distributed power Regulated Intermediate Bus Architectures (RIBAs), can be used to drive PoL converters and utilizes synchronous-rectifier topology. Fully...

Read More »
Tripp Lite and Almo Professional A/V: New Partnership Brings Advanced Power Protection to a Broad Base of A/V Professionals
Power Supplies

Tripp Lite and Almo Professional A/V: New Partnership Brings Advanced Power Protection to a Broad Base of A/V Professionals

Chicago, IL - Tripp Lite, a world-leading manufacturer of power protection equipment, is pleased to announce that Almo Professional A/V will now distribute its Pure Sine Wave A/V UPS Systems. The products are currently available and will be shown during Almo's E4 AV Tour, which takes place in San Francisco on April 6 then continues to Dallas on April 21. Tripp Lite is proud that Almo Professional...

Read More »
External AC-DC Power Supplies reach 92% efficiency.
AC to DC Power Supplies

External AC-DC Power Supplies reach 92% efficiency.

Aimed at medical and IT applications, AHM Series is comprised of 5 single-output ranges of 85, 100, 150, 180, or 250 W and provides nominal outputs from +12 to +48 Vdc. All units are convection cooled, removing need for internal forced air flow. Designed with smooth surface, enclosure can be wiped down in hospital environments. Enclosure also has IPX1 rating that protects against ingress of...

Read More »
Rack-Mount DC-DC Power Supply suits rugged vehicle applications.
DC to DC Power Supplies (Converters)

Rack-Mount DC-DC Power Supply suits rugged vehicle applications.

Model TVR3001, 3,000 W DC-DC power conversion rack features 3 modules, each with two F501 full brick DC-DC converters, coupled with 2-phase boost converter, to provide standalone power solution. Modules plug into 19 in., 2U rack which can be used in 19 in. cabinet of various heights. Operating in temperatures from -25 to +60Â-ºC, product offers step-up or step-down power conversion and has...

Read More »
Medical and ITE Power Adapters offer 135 W continuous output.
Power Supplies

Medical and ITE Power Adapters offer 135 W continuous output.

Fanless TMP135 series of medical power adapters are approved to UL 60601-1, EN 60601-1 3rd edition medical standards, and ITE adapters to UL 60950-1, EN 60950-1 2nd edition ITE standards. Peak power for 10 sec is up to 270 W, leakage current is less than 200 Â-µA, and efficiency is up to 91%. Operating at full load over temperature range of 0-40°C, and with derating to 50% at...

Read More »
Fieldbus-Based Power Supply suits explosive hazardous locations.
Power Supplies

Fieldbus-Based Power Supply suits explosive hazardous locations.

Dynamic Arc Recognition and Termination System (DART) is power supply and control system for fieldbus installations in intrinsic safety environments. Feeding power of 8-50 W, product detects change in current resulting from electrical fault where explosive spark is possible and immediately switches off power. Power is shut off in microseconds, robbing spark of energy needed to ignite hazardous...

Read More »
Electrical Regulators

Dual Voltage Supply Source features self-regulation.

Controlled by NSG 3000 Series of EMC test generators, Model VAR 3005 regulates test voltage and generates variable voltage for dips and drops testing of EUTs. Microprocessor-based, plug-and-play unit has several self-test features, including self-check, AC power volt check, and phase rotation check, as well as ability to inform users or stop test if test conditions are not correct. EUT supply...

Read More »
Variable Frequency Drive features modular design.
AC Motor Controllers and Drives

Variable Frequency Drive features modular design.

Available with 400-2,500 hp control unit, CFW11-M Inverter is supplied with all electrical and fiber optic connecting cables, panel rails, and fuses installed. Controls provide 3-phase, 380-690 Vac induction motor control with IPS1 interface card. To help prevent heat buildup, drive includes monitoring and protection functions, including IGBT overload protection feature, which monitors junction...

Read More »
Power Supplies

BEAR Wins Contract to Design and Produce Custom Power Supply for "down-hole" Instruments in Gas and Oil Exploration

Custom power supply features multiple inputs, digital monitoring, and ability to withstand harsh environment of oil and gas fields Phelps, NY - BEAR Power Supplies (www.bearpwr.com) has won a contract to design and produce a custom power supply for a leading provider of instrumentation for gas and oil exploration. The full-custom AC/DC converter will be rack mounted to power down-hole"...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics