DC to DC Power Supplies (Converters)

Step-Up DC-DC Converter serves as solar battery charger.

Employing Maximum Power Point Tracking algorithm for collecting maximum energy from solar cells, Model SPV1040 can be connected to strips of just a few cells, allowing use in portable healthcare devices, watches, calculators, wireless headsets, or mobile phones. IC features input voltage of 0.3-5.5 V, integrated low-loss synchronous rectifier and power switch, and shutdown pin to aid system-level...

Read More »
DC/DC Converters deliver up to 20 W regulated power.
DC to DC Power Supplies (Converters)

DC/DC Converters deliver up to 20 W regulated power.

Offering 4:1 input range with nominal input voltages of 24 and 48 Vdc, QMJ Series delivers single outputs of 3.3, 5, 12, and 15 Vdc, as well as dual outputs of ±12 and ±15 Vdc. Units operate with efficiencies up to 90% and include remote on/off, output trim, and short circuit protection. Housed in 1 x 1 in. package, converters feature temperature range of -40 to +70°C with no...

Read More »
DC to DC Power Supplies (Converters)

Front-End DC/DC Supply suits distributed power systems.

With 93% typ efficiency at half load power, D1U4CS-D-2100-54-HxxDC Series delivers bulk power to 54 Vdc distributed power applications. Floating output lets design engineer wire power supply in +54 V configuration for data center environment or -54 V configuration for telco central office environment. Rated to 2,100 W, series measures 13.5 x 4 x 1.6 in.; features 5 Vdc, 0.75 A standby output; and...

Read More »
TDK-Lambda Launches Smart Phone App for Selecting Power Supplies
Miscellaneous Software

TDK-Lambda Launches Smart Phone App for Selecting Power Supplies

San Diego, CA - TDK-Lambda Americas, a group company of TDK Corporation, has announced its new mobile web app for iPhone and Android smart phone owners. This app is user friendly and provides easy access to the company's full line of power supplies via smart phones. The app can be downloaded to iPhones and Android (2.0 or higher) cell phones at this mobile web link: http://wbxapp.com/tdk-lambda...

Read More »
Digital POL Regulator offers flexible monitoring, control.
Electrical Regulators

Digital POL Regulator offers flexible monitoring, control.

Via PMBus interface, 3E series BMR462 can be configured to dynamically minimize energy consumption under all load conditions. Up to 7 of these 12 A devices can be paralleled to deliver up to 84 A to load. Measuring 0.827 x 0.5 x 0.323 in., product offers synchronization capability and respective input and output ranges of 4.5-14 and 0.6-5 V. At half-load, 5 Vin and 3.3 Vout, typ efficiency is...

Read More »
AC/DC Power Supplies target medical and dental applications.
AC to DC Power Supplies

AC/DC Power Supplies target medical and dental applications.

Compliant with UL60601-1 and TUV 60601-1 medical safety standards, PM400 Series delivers 300 W in convection cooled environments and 400 W with forced air. Units accept universal input voltage of 90-264 Vac and provide output voltages from 12-48 Vdc, with standby output of 5 Vdc at 100 mA. Housed in 4 x 7 x 1.58 in. package, RoHS-compliant power supplies offer efficiencies greater than 88%,...

Read More »
DC to DC Power Supplies (Converters)

Isolated DC/DC Converter works with isolated 2 W power supplies.

Model TPS55010, 2 W, 6 V primary-side feedback transformer driver features Fly-Buck topology to provide isolated power and remove ground loops from analog circuitry and communication interfaces, from unregulated 3.3 or 5 V input. Output voltage is set by resistor divider and transformer turns ratio. Providing up to 85% efficiency, unit has switching frequency range of 100 kHz to 2 MHz, and...

Read More »
Industrial AC/DC Power Supplies generate 500 W output.
AC to DC Power Supplies

Industrial AC/DC Power Supplies generate 500 W output.

Featuring 132 x 64 x 300 mm enclosure, HBC 500 industrial-quality AC/DC power supplies include 2 output terminals. Redundant terminal has output voltage of 24 Vdc/20 A, 48 Vdc/10 A, or 125 V/4 A, while direct terminal has output voltage that is one diode drop higher. Input accepts 230 Vac/115 Vac or 220 V to 370 Vdc. Resistant to shock and vibration, products also include current limiting on...

Read More »
DC to AC Power Supplies (Inverters)

Nissan Celebrates 30-Year, $3.5 Billion Commitment to State of Tennessee with Installation of 30 Solar EV Chargers

FRANKLIN, Tenn.-- Nissan North America, Inc. has begun installation of 30 solar-assisted charging stations at the Smyrna Vehicle Assembly Plant and the Nissan Americas headquarters in Franklin, Tenn. The 30 chargers at the two Tennessee facilities mark the latest in a long line of dedicated investments totaling $3.5 billion over the course of Nissan's statewide, 30-year presence. The advanced...

Read More »
Wall Mount Power Adapters deliver 5-7 W continuous output.
AC to DC Power Supplies

Wall Mount Power Adapters deliver 5-7 W continuous output.

Operating at 90-264 Vac, 47-63 Hz universal input, TVW7 series AC/DC power adapters deliver 5-7 W of continuous output power and have output voltage range of 3-27 V. They consume 0.3 W standby power at no load and include overvoltage, overload, and short-circuit protection. Fully loaded at -10 to +40°C ambient temperature, they require 25% derating at +50°C. Models with 5 V/1 A output...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics