New DRS-206-05-012-01-EX Positioning Stage Assembled on Single Piece of Aluminum Extrusion
Uses cog-free brushless linear motor to generate continuous force of 12.4 lbs and peak force of 37.4 lbs with a total stroke length of 210 in. Features low-profile, high speed, fast lead times and high acceleration. Ideal for applications that require long travel distances.
Read More »
New RS-50A Rotary Indexer from Nabtesco Suitable for Index Tables
Features shorten cycle times, hollow shaft, oil changing and compatible with all servo motors. Ideal for high speed applications and able to handle loads up to 1 ton. RS*-S. Offers reduction ratios ranging from 65.4:1 to 163.5:1 and has turntable gearbox.
Read More »
New Positioning Stage Available with Sliding Contact Bearing System
VMS06-008-LB-01 features high acceleration and compact footprint. Available with 0.60" stroke, generates 1.12 lbs of continuous force and 3.36 lbs of peak force. Ideal for applications that require quick, short moves with fast settling times.
Read More »
The Precision Alliance Introduces the Industry's First Small Plate Handler for Medical Devices
TPA Motion has developed the first low profile micro plate handler. Its small size and low profile enable device manufacturers to make smaller diagnostic or instrument systems. . Each unit is factory calibrated and tested to provide maintenance free long life in clinical lab and office environments. . The new low profile 96-well plate handler can reach beyond its small foot print. .
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
New AZV9010 and AZV9020 Z-Axis Stages Weigh 1.85 kg and 1.95 kg Respectively
Stages has a 90 x 90 mm table with threaded holes for fixtures or tooling. Features dynamic straightness of 5 microns and dynamic parallelism of 30 microns. Maximum z-axis travel speed is 5 mm/sec (0.196 in/sec) and load capacity is 5 kg. (11.0 lbs).
Read More »
New V-610 Direct Drive Rotary Stage Provides Peak Torque of 1.2Nm
Equipped with a high-force 3-phase torque motor and a direct incremental encoder for position feedback and closed-loop operation. Features low profile of only 28mm (1.1 inch) allowing integration into tight spaces. Provide smooth running with good velocity control due to the lack of cogging effects caused by permanent magnets.
Read More »
New V-610 Rotary Positioner is Used for Fast and Precise Rotation of Samples and Optics
Applications include medical, metrology, precision microassembly, bio-research, optical inspection, and semiconductor test and manufacture. Clear aperture of 25mm (1”) for transmissive-light applications. Can combine with PI’s H-811 hexapod 6DOF parallel positioner and add unlimited rotation to compact 6-axis alignment system.
Read More »
New Pitch-and-Roll Stages are Available with Servo Motors and Stepper Motors
Offers an expanded series to meet the specific requirements such as: angle range - 20° (± 10°), 30° (± 15°), and 90° (± 45°), height of rotation, size and load capacity. Accuracies for repeatability are ± 4 minutes, positional accuracy ± 8 minutes, and backlash ± 3 minutes. Measure angles of objects such as crystals, examining cutting edges of medical instruments, measurements of...
Read More »
New U-723 XY Stage Provides High Speed Motion up to 200 mm/sec
Provides 0.8” travel per axis with a footprint of 42x42mm (1.6x1.6”). Allows for integration into tight spaces. Offers fast step/settle performance.
Read More »
New PT60-1 and PT100-1 Weighs 2.0Kg and 4.4Kg Respectively
PT60-1 and PT100-1 Pan-Tilt stages provide load capacities of 10 kg and 20 kg respectively. Features repeatability of 0.005°, positional accuracy of 0.005° and resolution of 0.001° = 3.6". Ideal for scanning, testing, inspection, assembly, positioning, laser, micro machining, pointing optics and cameras applications.
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
