New Positioners Products

Motorized Rotary Stage suits wafer processing.

Providing non-contact operation, Z-theta Stage is not affected by torque variations because there is no gear interface. Unit provides 360Ã-

Infinite Positioning Indexer offers ergonomic operation.

Greased for life to provide zero-maintenance positioning solution, RS-320A has low-profile design (14 in. from floor to mounting surface) and incorporates near-zero backlash gearbox with right angle motor mounting. System features cast iron base, unbalanced load support capability, and no pre-set stops. Thrust capacity is 11,000 lb, positioning accuracy is .0025 in. at 3 ft radius, and E-stop...

Linear Positioning Stages feature 0.1 micron resolution.

Mounted on any flat surface, XR(TM) crossed roller bearing, brushless linear servo motor stages offer smooth motion suitable for base or X axis in stacked multi-stage (X-Y) applications. Load capacity is 200 lb, velocity is 100 in./sec with acceleration up to 9 G. Construction also includes choice of iron core, non-cogging linear motor with sinusoidal/trapezoidal commutation or ironless core,...

Centricity Corporation Introduces NETWORKING within the MS Series Line of Low-Cost, High-Precision Programmable Indexers

GIRARD, OH - Centricity Corporation, in Girard, Ohio, announces network capability within its line of high precision programmable indexers. Now all the parameters and features of the popular MS Series Indexer can be accessed over the network, allowing your PLC to store multiple indexer configurations. So if one job is a 6-stop indexer moving clockwise, and another job is an 11-stop indexer moving...

How Marketing Can Help Manufacturers Recruit For Industry 4.0

Manufacturers have been fighting a recruiting crisis for the past several years. This white paper offers tips for attracting new, young employees to your manufacturing company.

Positioning System holds video cameras and sensors.

Using ball-end mounts or V-block clamps, Universal Positioning System lets users position and lock video cameras, sensors, and other devices in any plane. It delivers unlimited degrees of positioning freedom and is suited for use on conveyors and packaging equipment. Machined base attaches to any flat surface, and series of stepped and straight-through couplings accept Ã-½, Ã-¾, and 1 in....

Positioning Stage handles loads up to 200 N.

Measuring 40 mm high, single-axis positioning stage model PMT160-DC is available in 5 sizes with strokes ranging from 50-300 mm and straightness/flatness deviation from 0.5-4 microns. Table weights vary from 3.7-6.5 kg, and devices offer positional accuracy of 10-20 Ã-µm and repeatability of 0.5 Ã-µm, with speeds up to 50 mm/s and accelerations of 0.5 m/sÃ-². Standard stage includes...

Linear Actuators suit micro positioning applications.

Utilizing frictionless/stictionless flexures for zero mechanical noise, Linear Focus Actuators feature 150 nm resolution voice coil stages with central clear aperture from 0.236-0.787 in. Ranging from Ã-

Parts Handling System makes stacks of different components.

Utilizing Feedscape(TM) I.D. feeding technology in conjunction with MS Series(TM) Indexer, VERSA-STACK lets users create stacks of various sub-assemblies. Feedscape isolates and feeds each component directly from bowl feeder or spring feeder, and guides them on series of indexing pins positioned on outer edge of indexer dial plate. Once stack is complete, escapement deposits stack to final...

Frictionless Systems move and position heavy loads.

Using 0.005 in. of nearly frictionless air to lift loads, Aero-Planks offer flexible movement and can balance uneven loads with single air-pressure regulator. Units offer omnidirectional movement and can float loads down production lines as weights increase. Since they do not require permanent in-floor fixtures, travel paths can be changed as needed. Options such as operator handles, guide or...

Rotary Stages provide 45-300 rpm continuous rotation.

Available in 100, 150, 200, 250, and 325 mm aperture sizes, ALAR Rotary Stages provide angular positioning and velocity control with axial load capacity of 300-1,000 lb. Stages are 65-160 mm tall and deliver smooth motion without travel restrictions. They utilize brushless, slotless motors with zero cogging and no torque ripple. Performance is assured with encoder line counts from 31,000-74,000...

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.